Hi,
I am configuring two SRX300 routers to use VRRP, but I am facing an issue, that is not making any sense for me.
Config:
Router-01
show configuration interfaces ge-0/0/0
unit 0 {
description "CNX LAN";
family inet {
address 172.16.63.201/25 {
vrrp-group 1 {
virtual-address 172.16.63.200;
priority 200;
preempt;
accept-data;
}
}
}
}
Router-02
show configuration interfaces ge-0/0/0
unit 0 {
description "CNX LAN";
family inet {
address 172.16.63.202/25 {
vrrp-group 1 {
virtual-address 172.16.63.200;
preempt;
accept-data;
}
}
}
}
As you can see, the commands are very simple and there is no magic, but when I connect the interface in my Core Switch, the VRRP cannot establish the communication with the other router. Each router is running as Active.
From Router-01, I can ping Router-02 and vice-versa, but I cannot find what is the root cause that is avoiding the VRRP to work.
I really need some help to understand this behavior.
Regards,
Morais
------------------------------
Thiago Morais
------------------------------