This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.

Expand all | Collapse all

Using reth interfaces on a single SRX

  • 1.  Using reth interfaces on a single SRX

    Posted 05-22-2021 15:39


    Would it be possible to install a single SRX1500 as a member of a chassis cluster (e.g with cluster id of 1) and configure all of the revenue interfaces as reth interfaces instead of regular physical interfaces?

    Eventually in a matter of couple of months, we plan to bring a secondary 1500 and join it as a member of the chassis cluster.


  • 2.  RE: Using reth interfaces on a single SRX

    Posted 05-23-2021 01:57
    Absolutely. It's always better to set such things up together so you can test that configs and failover work properly, so plan for a maintenance window when the time comes to add the second.