View Only


This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.

  • 1.  SRX to AWS ipsec vpn

    Posted 01-01-2022 06:20
    Hi guys,
    good day. 

    are there any folks around here who has a working setup (SRX to AWS) IPSec vpn where a pulse secure in AWS is involved?

    in AWS, their templates had 2 tunnels so I assume this is route based vpn. But Im not sure how their 2 tunnels work when the srx has static routes 
    that points to AWS subnet eg where pulse is installed.

    AWS Cloud (Pulse Secure) -->   -------------> SRX Public IP ------------> LAN Subnets (eg. , to be accessed  by AWS Pulse Secure client.

    Split tunnel is working fine but when a host pc 12.12.12.x is authenticated via AWS Pulse, route to LAN subnets is not working.

    Phase 1 and phase 2 worked fine from the SRX logs.

    Maybe I missed on the AWS part?


    Leangf Leangf

  • 2.  RE: SRX to AWS ipsec vpn

    Posted 01-01-2022 07:19
    Could you provide the link to the configuration you are trying to implement on AWS?

    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)