SRX

 View Only
last person joined: 12 hours ago 

Ask questions and share experiences about the SRX Series, vSRX, and cSRX.
  • 1.  SRX - Split Tunnel - Using Juniper Secure Connect

    Posted 12-02-2021 19:55
    I have Juniper Secure Connect (JSC) set up on my SRX300 with 21.2R1.10

    It works well, except, when when someone connects, they can no longer access the Internet  (i.e www.rockylinux.org or whatever is your favorite web site) while the vpn tunnel is up. They can access everything inside the protected network (i.e. behind the SRX) .

    In otherwords, I need to get split tunneling working. The employees working from home need to access some cloud based systems, and systems behind the SRX at the same time.

    I have found several articles that reference the command
    set security dynamic-vpn clients all.....
    but that appears to work with Pulse Secure and not Juniper Secure Connect.

    I need to get split tunneling working. Any suggestions???

    Thanks!!!


  • 2.  RE: SRX - Split Tunnel - Using Juniper Secure Connect

    Posted 12-03-2021 10:02
    how is the traffic selector within the security ipsec config set up?  When connected via the VPN, what is the local hosts (PC not SRX) route table look like?


  • 3.  RE: SRX - Split Tunnel - Using Juniper Secure Connect

    Posted 12-03-2021 15:56
      |   view attached
    See attached abbreviated config.

    Thank you!!!

    Attachment(s)

    txt
    SanitizedConfig.txt   27 KB 1 version