SRX

 View Only
last person joined: 17 hours ago 

Ask questions and share experiences about the SRX Series, vSRX, and cSRX.
  • 1.  SRX 550 reth works without LACP or not

    Posted 08-13-2021 10:38
    Hi All,
    i need to know that whther we can configure reth interface without LACP?
    and if i configure it without LACP than what will be the effects. will it cause any issue?


    ------------------------------
    PIush Sharma
    RIM NETWORK SUPPORT
    ------------------------------


  • 2.  RE: SRX 550 reth works without LACP or not

    Posted 08-16-2021 09:06
    Hi,


    No issue with or without lacp.


    Thanks


  • 3.  RE: SRX 550 reth works without LACP or not

    Posted 08-16-2021 09:06
    Hi Plush

    A reth interface is a pseudo/logical interface configured in a chassis cluster environment. This reth interface can contain a physical interface from each node participating in the cluster and it will only be active on the active node in the cluster.
    There is no need of configuring LACP in it unless you need to aggregate 2 or more physical interfaces to be part of reth interface in the same node.

    The below guides and KBs will help you to understand better:
    https://www.juniper.net/documentation/us/en/software/junos/chassis-cluster-security-devices/topics/topic-map/security-chassis-cluster-redundant-ethernet-interfaces.html
    https://kb.juniper.net/InfoCenter/index?page=content&id=KB21312&actp=METADATA
    https://kb.juniper.net/InfoCenter/index?page=content&id=KB22474&actp=search&act=login

    Please mark this comment as correct if this answers your query.

    Regards


  • 4.  RE: SRX 550 reth works without LACP or not

    Posted 08-16-2021 09:07
    Hi,

    No issue reth with or without lacp. The important thing end other site need same.

    Thanks