SRX

 View Only
last person joined: 23 hours ago 

Ask questions and share experiences about the SRX Series, vSRX, and cSRX.
  • 1.  eventd process is 100%

    Posted 09-20-2021 12:50
    I have observed that eventd process is reaching 100 % and due to this control plane load is 100%.

    I tried disabling tracing option but didnt help.
    Then I restarted the eventd process but no luck.

    Any suggestion what is causing eventd process to be highly utilised

    show system processes extensive
    last pid: 1612; load averages: 1.47, 1.34, 1.14 up 5+04:24:44 23:32:18
    334 processes: 3 running, 273 sleeping, 58 waiting

    Mem: 71M Active, 1168M Inact, 326M Wired, 129M Buf, 290M Free
    Swap: 1639M Total, 120K Used, 1638M Free


    PID USERNAME PRI NICE SIZE RES STATE TIME WCPU COMMAND
    1414 root 102 0 726M 14080K RUN 4:39 100.00% eventd
    9379 root 20 0 724M 14020K select 4:00 0.68% rtlogd
    12 root -60 - 0K 928K WAIT 53:38 0.39% intr{swi4: clock (0)}
    12 root -72 - 0K 928K WAIT 18:49 0.20% intr{swi1: netisr 0}
    9262 root 20 0 761M 32876K select 9:29 0.10% mib2d
    11 root 155 ki31 0K 16K RUN 116.7H 0.00% idle
    9381 root 20 0 714M 4740K select 59:44 0.00% sysctlrelayd
    9267 root 20 0 745M 22320K select 15:05 0.00% pfed
    2 root -16 - 0K 16K jfe_jo 13:54 0.00% jfe_job_0_0
    9354 root 20 0 735M 15664K select 13:51 0.00% license-check
    9265 root 20 0 921M 34248K select 13:18 0.00% l2ald
    9353 root 20 0 725M 7928K select 12:13 0.00% repd{repd}
    9302 root 20 0 776M 5592K select 6:32 0.00% shm-rtsdbd
    15 root -16 - 0K 16K - 5:02 0.00% rand_harvestq
    9356 nobody 20 0 69768K 3780K select 4:13 0.00% na-mqttd
    9258 root 20 0 731M 16900K select 4:13 0.00% snmpd
    9231 root 20 0 5948K 1440K select 3:29 0.00% bslockd
    9237 root 20 0 800M 38572K select 3:03 0.00% chassisd
    9263 root 20 0 827M 73264K kqread 2:58 0.00% rpd{rpd}
    9304 root 20 0 837M 5456K nanslp 2:50 0.00% gstatd
    12 root -92 - 0K 928K WAIT 2:25 0.00% intr{irq259: virtio_pci1}

    ---------------------------


    Thanks,
    Rahul Kharade


    ------------------------------
    rahul kharade
    ------------------------------


  • 2.  RE: eventd process is 100%

    Posted 09-21-2021 09:00
    Issue resolved after changing the logging mode from event to stream

    ------------------------------
    rahul kharade
    ------------------------------