I have observed that eventd process is reaching 100 % and due to this control plane load is 100%.
I tried disabling tracing option but didnt help.
Then I restarted the eventd process but no luck.
Any suggestion what is causing eventd process to be highly utilised
show system processes extensive
last pid: 1612; load averages: 1.47, 1.34, 1.14 up 5+04:24:44 23:32:18
334 processes: 3 running, 273 sleeping, 58 waiting
Mem: 71M Active, 1168M Inact, 326M Wired, 129M Buf, 290M Free
Swap: 1639M Total, 120K Used, 1638M Free
PID USERNAME PRI NICE SIZE RES STATE TIME WCPU COMMAND
1414 root 102 0 726M 14080K RUN 4:39 100.00% eventd
9379 root 20 0 724M 14020K select 4:00 0.68% rtlogd
12 root -60 - 0K 928K WAIT 53:38 0.39% intr{swi4: clock (0)}
12 root -72 - 0K 928K WAIT 18:49 0.20% intr{swi1: netisr 0}
9262 root 20 0 761M 32876K select 9:29 0.10% mib2d
11 root 155 ki31 0K 16K RUN 116.7H 0.00% idle
9381 root 20 0 714M 4740K select 59:44 0.00% sysctlrelayd
9267 root 20 0 745M 22320K select 15:05 0.00% pfed
2 root -16 - 0K 16K jfe_jo 13:54 0.00% jfe_job_0_0
9354 root 20 0 735M 15664K select 13:51 0.00% license-check
9265 root 20 0 921M 34248K select 13:18 0.00% l2ald
9353 root 20 0 725M 7928K select 12:13 0.00% repd{repd}
9302 root 20 0 776M 5592K select 6:32 0.00% shm-rtsdbd
15 root -16 - 0K 16K - 5:02 0.00% rand_harvestq
9356 nobody 20 0 69768K 3780K select 4:13 0.00% na-mqttd
9258 root 20 0 731M 16900K select 4:13 0.00% snmpd
9231 root 20 0 5948K 1440K select 3:29 0.00% bslockd
9237 root 20 0 800M 38572K select 3:03 0.00% chassisd
9263 root 20 0 827M 73264K kqread 2:58 0.00% rpd{rpd}
9304 root 20 0 837M 5456K nanslp 2:50 0.00% gstatd
12 root -92 - 0K 928K WAIT 2:25 0.00% intr{irq259: virtio_pci1}
---------------------------
Thanks,
Rahul Kharade
------------------------------
rahul kharade
------------------------------