Hello all,
I hope you are well. With a SRX1500, is it possible to create a IPsec VPN between the SRX and a Linux machine?
Something like this:
- Static IPs on both ends.
- SRX uses an IP pool to assign the Linux machine an inner IP.
- No use of username and password.
The idea is to have something that works like a remote client VPN (using the NCP client) where the NCP client uses a public IP (outer IP) to establish the tunnel and then gets an inner IP from the SRX. However, the NCP client config means that a username and password are needed.
Also, when trying to configure static (outer) IPs, the SRX considers it as a site-to-site tunnel.
SRX> "For site-to-site tunnels, aaa access-profile configuration is not allowed"
I've tried to find the answer here but maybe I've missed it:
IPsec VPN Configuration OverviewThank you for your help!