SRX

 View Only
last person joined: 19 hours ago 

Ask questions and share experiences about the SRX Series, vSRX, and cSRX.
  • 1.  Conflicting ip address space with pulse client

    Posted 03-31-2021 09:15
    Hello,

    I am searching how to resolve this kind of problem:

    Org - 192.168.1.0/24 [SRX] ======== [Pulse Client] - 192.168.1.0/24

    I have found:
    [SRX] Example - Configuring overlapping IP address space at two sites separated by a single SRX series device - Juniper Networks

    But I am not sure if it applies. Double NAT (org / client) is required, but how can I configure that with dynamic vpn pulse client ? Or is there something better to do  ? (Clients are running on MacOSX systems).

    Can you give me any link/hint to help me resolve that ?

    Thank you.

    ------------------------------
    Nicolas
    ------------------------------


  • 2.  RE: Conflicting ip address space with pulse client

    Posted 05-06-2021 14:42
    The easy approach is to change the pulse client pool.

    ------------------------------
    2LNetworks
    ------------------------------