SRX

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



Expand all | Collapse all

Conflicting ip address space with pulse client

  • 1.  Conflicting ip address space with pulse client

    Posted 03-31-2021 09:15
    Hello,

    I am searching how to resolve this kind of problem:

    Org - 192.168.1.0/24 [SRX] ======== [Pulse Client] - 192.168.1.0/24

    I have found:
    [SRX] Example - Configuring overlapping IP address space at two sites separated by a single SRX series device - Juniper Networks

    But I am not sure if it applies. Double NAT (org / client) is required, but how can I configure that with dynamic vpn pulse client ? Or is there something better to do  ? (Clients are running on MacOSX systems).

    Can you give me any link/hint to help me resolve that ?

    Thank you.

    ------------------------------
    Nicolas
    ------------------------------


  • 2.  RE: Conflicting ip address space with pulse client

    Posted 05-06-2021 14:42
    The easy approach is to change the pulse client pool.

    ------------------------------
    2LNetworks
    ------------------------------