Hi All,
Need some help with getting an external modem (Draytek Vigor 130) to work via PPoE on an ADSL connection. I can get this to work with zero issues on a Cisco 881 without issue. Any ideas?
Config used is below:
root@Data_Test# show interfaces ge-0/0/5
unit 0 {
encapsulation ppp-over-ether;
}
root@Data_Test# show interfaces pp0
unit 0 {
ppp-options {
chap {
default-chap-secret "$9$INvRyevMLNVsfTyeWxVb.mf5Q3"; ## SECRET-DATA
local-name "RADIUS-USERNAME-REDACTED";
passive;
}
}
pppoe-options {
underlying-interface ge-0/0/5.0;
idle-timeout 0;
auto-reconnect 1;
client;
}
family inet {
mtu 1492;
negotiate-address;
}
}
root@Data_Test# show security zones
security-zone untrust {
screen untrust-screen;
host-inbound-traffic {
system-services {
all;
}
protocols {
all;
}
}
interfaces {
ge-0/0/0.0;
pp0.0;
ge-0/0/5.0;
}
}
root@Data_Test> show ppp summary
Interface Session type Session phase Session flags
pp0.0 PPP Disabled
}
root@Data_Test> show pppoe statistics
Active PPPoE sessions: 0
PacketType Sent Received
PADI 16999 0
PADO 0 0
PADR 0 0
PADS 0 0
PADT 0 0
Service name error 0 0
AC system error 0 0
Generic error 0 0
Malformed packets 0 0
Unknown packets 0 0
Timeout
PADI 2819
PADO 0
PADR 0
Receive Error Counters
PADI 0
PADO 0
PADR 0
PADS 0
}
root@Data_Test> show pppoe interfaces
pp0.0 Index 76
State: PADI sent, Session ID: None,
Service name: None,
Session AC name: None, Configured AC name: None,
Remote MAC address: 00:00:00:00:00:00,
Auto-reconnect timeout: 1 seconds, Idle timeout: Never,
Underlying interface: ge-0/0/5.0 Index 74
Ignore End-of-List tag: Disable
PPP-Max-Payload tag: 1492
}
root@Data_Test> show interfaces pp0
Physical interface: pp0 , Enabled, Physical link is Up
Interface index: 129, SNMP ifIndex: 501
Type: PPPoE, Link-level type: PPPoE, MTU: 1532
Device flags : Present Running
Interface flags: Point-To-Point SNMP-Traps
Link type : Full-Duplex
Link flags : None
Input rate : 0 bps (0 pps)
Output rate : 0 bps (0 pps)
Logical interface pp0.0 (Index 76) (SNMP ifIndex 544)
Flags: Hardware-Down Up Point-To-Point SNMP-Traps 0x0 Encapsulation: PPPoE
PPPoE:
State: SessionDown, Session ID: None,
Configured AC name: None, Service name: None,
Auto-reconnect timeout: 1 seconds, Idle timeout: Never,
Underlying interface: ge-0/0/5.0 (Index 74)
Ignore End-Of-List tag: Disable
PPP-Max-Payload tag: 1492
Input packets : 0
Output packets: 0
Keepalive settings: Interval 10 seconds, Up-count 1, Down-count 3
Keepalive: Input: 0 (never), Output: 0 (never)
LCP state: Not-configured
NCP state: inet: Not-configured, inet6: Not-configured, iso: Not-configured, mpls:
Not-configured
CHAP state: Closed
PAP state: Closed
Security: Zone: untrust
Allowed host-inbound traffic : bootp bfd bgp dns dvmrp igmp ldp msdp nhrp
ospf pgm pim rip router-discovery rsvp sap vrrp dhcp finger ftp tftp
ident-reset http https ike netconf ping reverse-telnet reverse-ssh rlogin
rpm rsh snmp snmp-trap ssh telnet traceroute xnm-clear-text xnm-ssl lsping
ntp sip r2cp webapi-clear-text webapi-ssl tcp-encap
Protocol inet, MTU: 1492
Flags: Sendbcast-pkt-to-re, Protocol-Down, User-MTU, Negotiate-Address