SRX

Expand all | Collapse all

CGNAT configuration on SRX?

Jump to Best Answer
  • 1.  CGNAT configuration on SRX?

    Posted 08-15-2019 08:59

    Hi all,

     

    I'm try to search CGNAT configuration on SRX but it just pointing on MX. So anyone can give me some example or url how CGNAT configure on SRX?

     

    Thanks and appreciate any help

     

     



  • 2.  RE: CGNAT configuration on SRX?
    Best Answer

    Posted 08-15-2019 09:59

    Hey Kroniclez,

     

    Did you had a chance to check this forum answer? - https://forums.juniper.net/t5/SRX-Services-Gateway/Carrier-Grade-NAT-SRX5K/td-p/405439

     

    CG-NAT is not supported on SRX series devices, however, you can configure Source/Destination/Static NAT under security hierarchy in SRX.



  • 3.  RE: CGNAT configuration on SRX?

    Posted 08-15-2019 11:02

    hi noobmaster,

     

    thanks for the url.

     

     

     

     



  • 4.  RE: CGNAT configuration on SRX?

    Posted 08-15-2019 12:02

    You're welcome, Kronicklez.



  • 5.  RE: CGNAT configuration on SRX?

    Posted 08-16-2019 06:10

    Hi all,

     

    Based on this url datasheet https://www.juniper.net/assets/us/en/local/pdf/datasheets/1000628-en.pdf   "Port Block Allocation method for CGNAT" is it configuration same as MX or it different on SRX?

     

    Thanks and appreciate any feedback

     

     



  • 6.  RE: CGNAT configuration on SRX?

    Posted 08-16-2019 11:27

    Kronicklez,

     

    The configuration varies between SRX and MX.

     

    Please refer the section "Understanding Source NAT Pools" and check the "port" option from the following link - https://www.juniper.net/documentation/en_US/junos/topics/topic-map/nat-security-source-and-source-pool.html