SRX

Expand all | Collapse all

Two routing engines on SRX5600

Jump to Best Answer
  • 1.  Two routing engines on SRX5600

    Posted 06-18-2019 03:38

     Hi all!

    Can I use two routing engines on a single SRX5600 ? I haven't found any docs for this scenario. Thanks. Regards, Endi



  • 2.  RE: Two routing engines on SRX5600

    Posted 06-18-2019 03:51

    Yes, You can install two routing-engines on a single SRX5600. But it does not provide any backup (failover) functionality. Second routing-engine is usually used in cluster environment where it requires dual control link functionality. In that case,the purpose of the second Routing Engine is only to initialize the switch on the SCB.

     



  • 3.  RE: Two routing engines on SRX5600
    Best Answer

     
    Posted 06-18-2019 06:57

    What Nellikka mentioned + some documentation that could help.

     

    https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-chassis-cluster-dual-control-links.html

    Refer the 'Dual Control Links Functionality Requirements' stanza.

     

    Hope that helps.

    Pooja