SRX

Expand all | Collapse all

How to measure the vpn throughput in SRX branch and high end?

Jump to Best Answer
  • 1.  How to measure the vpn throughput in SRX branch and high end?

    Posted 11-07-2017 06:16

    Hi all,

    i saw in the datasheet of srx the throughput supported by this plataform (both branch and HE). My question is, how i can measure the throughput of VPN in the own SRX, for example, CLI? There some commands to identify the throughput in a specific moment? Can i verify this through Solarwinds or another Network Management Tool?

     

    Tks,

    João Victor



  • 2.  RE: How to measure the vpn throughput in SRX branch and high end?

     
    Posted 11-07-2017 18:58

    Hello ,

     

    There are no straight forward command to get the throughput through VPN tunnels . At most I have tried to get the output from " monitor interface traffic " of st0 ( for route based only ) and see .



  • 3.  RE: How to measure the vpn throughput in SRX branch and high end?
    Best Answer

     
    Posted 11-12-2017 04:41

    Your best bet is to monitor via Solarwinds or other NMS for the st0 tunnel interface traffic bandwidth.

     



  • 4.  RE: How to measure the vpn throughput in SRX branch and high end?

    Posted 11-29-2017 12:16

    Ok, tks for response and tks for help. Smiley Happy