SRX

 View Only
last person joined: 2 days ago 

Ask questions and share experiences about the SRX Series, vSRX, and cSRX.

  • 1.  Packet mode to flow mode compatibility and configuration converter

    Posted 02-21-2018 08:50

    Hi,

    We have two SRX240H2 configured in packet mode. There are 15 VRF and 14 VRRP instance(multiple unit configured und ge-0/0/2 interface) configured. Please find below memory and cpu utilization status.

    memory and cpu utilizationmemory and cpu utilization

     1) If i configured this device into flow mode, will it work

    2) How to configure multiple unit under single reth interface

    3) Is there any tool to convert packet base configuration into flow mode

    Thank you....

     

     

     


    #SRX


  • 2.  RE: Packet mode to flow mode compatibility and configuration converter
    Best Answer

    Posted 02-21-2018 23:19

    1) If i configured this device into flow mode, will it work - VRF as well as VRRP are supported in flow mode.

    2) How to configure multiple unit under single reth interface - you can use commmand under [edit interfaces rethx] - vlan-taggiging (which you might you used in current config as well) to create multiple units with different vlan ids.

    3) Is there any tool to convert packet base configuration into flow mode - As of now, no.