Log in to ask questions, share your expertise, or stay connected to content you value. Don’t have a login? Learn how to become a member.
Hi,
I want to config the SRX300 as a DDNS client. Is there any way to config it on web GUI or CLI?
My SRX300 software is 15.1X49-D100.6 .
Thanks.
Are you looking for this?
https://kb.juniper.net/InfoCenter/index?page=content&id=KB28971
HTH
I had try this but it only has dyndns by default. How can I add no-ip on it ?
You can refer to below old thread for the information on no-ip
https://forums.juniper.net/t5/SRX-Services-Gateway/Is-it-possible-to-use-no-ip-for-Dynamic-DNS/td-p/277532