SRX

 View Only
last person joined: yesterday 

Ask questions and share experiences about the SRX Series, vSRX, and cSRX.
  • 1.  Error during the update SRX4600 cluster

    Posted 01-31-2019 23:53

    Hello
    I just wanted to update my new srx4600 cluster
    if I have the command request system software in-service-upgrade /var/tmp/junos-srxhe-x86-64-18.4R1.8.tgz reboot

    I will follow the output

     

    ode0:
    Chassis ISSU Started
    node1:
    Chassis ISSU Started
    ISSU: Validating Image
    ISSU: Pre-check.
    ISSU: Pre-check failure. Reason: Priority too low
    node0:
    JSRPD exited in-service-upgrade window
    node1:
    JSRPD exited in-service-upgrade window
    node0:
    Chassis ISSU Aborted
    node1:
    Chassis ISSU Aborted
    ISSU: IDLE
    [Feb 1 08:48:54]: ISSU aborted and exiting ISSU window.

     

    So the problem comes that the redundancy group 2 both nodes the priorty 0 because the interface is still down?

     



  • 2.  RE: Error during the update SRX4600 cluster

    Posted 02-01-2019 00:13

    Please share the output of below mentioned commands:

    show chassis alarm

    show chassis fpc pic-status

    show chassis cluster status

    show chassis cluster interfaces

    show chassis cluster information detail 

     



  • 3.  RE: Error during the update SRX4600 cluster
    Best Answer

     
    Posted 02-01-2019 00:18
    ISSU won’t work if any node priority is zero as it will stop/prevent automatic failovers


  • 4.  RE: Error during the update SRX4600 cluster

    Posted 06-12-2019 00:32

    ANFAFFM, 

    Which version are you upgrading from, via ISSU to 18.4R1.8  on 4600  ? . We may have a known software issue around this.