Hello everyone,
So I have a SRX240 that was pulled from a production network. After holding down the reset config button to blow the configs away, I get the issue below regarding not being able to load kernel. I have tried disabling watchdog. I currently don't have internet access nor anyway to connect it to a tftp server. I do however have a machine with a usb port and usb drive. I have attempted to install a few images, but all resulted in the same messages below.
Any help would be greatly appreciated.
Thank you.
U-Boot 1.1.6-JNPR-2.1 (Build time: Jul 4 2011 - 03:55:46)
SRX_240_HIGHMEM board revision major:0, minor:31, serial #: AAAM9214
OCTEON CN5230R-SCP pass 2.0, Core clock: 600 MHz, DDR clock: 333 MHz (666 Mhz data rate)
DRAM: 1024 MB
Starting Memory POST...
Checking datalines... OK
Checking address lines... OK
Checking 512K memory for U-Boot... OK.
Running U-Boot CRC Test... OK.
Flash: 4 MB
USB: scanning bus for devices...
Root Hub 0: 4 USB Device(s) found
Root Hub 1: 1 USB Device(s) found
scanning bus for storage devices... 2 Storage Device(s) found
Clearing DRAM........ done
BIST check passed.
1:00:00.0 Vendor/Device ID = 0x811210b5
1:01:07.0 Vendor/Device ID = 0xc72414e4
Boot Media: nand-flash usb
Net: octeth0
POST Passed
Press SPACE to abort autoboot in 1 seconds
ELF file is 32 bit
Loading .text @ 0x8f000078 (245596 bytes)
Loading .rodata @ 0x8f03bfd4 (13940 bytes)
Loading .rodata.str1.4 @ 0x8f03f648 (16648 bytes)
Loading set_Xcommand_set @ 0x8f043750 (100 bytes)
Loading .rodata.cst4 @ 0x8f0437b4 (20 bytes)
Loading .data @ 0x8f044000 (5608 bytes)
Loading .data.rel.ro @ 0x8f0455e8 (120 bytes)
Loading .data.rel @ 0x8f045660 (136 bytes)
Clearing .bss @ 0x8f0456e8 (11656 bytes)
## Starting application at 0x8f000078 ...
Consoles: U-Boot console
Found compatible API, ver. 2.1
FreeBSD/MIPS U-Boot bootstrap loader, Revision 2.1
(builder@chamuth.juniper.net, Mon Jul 4 03:14:10 UTC 2011)
Memory: 1024MB
[1]Booting from nand-flash slice 1
Un-Protected 1 sectors
writing to flash...
Protected 1 sectors
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ not found
U-Boot Exception, Cause: 4
Failed to load kernel.
zero: 00000000 at: acedbade v0: 00000000 v1: aaaaaaaa
a0: 8f05fd70 a1: ffffffaa a2: 00000028 a3: ffffffaa
t0: 8f060388 t1: 8f0603b0 t2: 8f047210 t3: 00000000
t4: 00000000 t5: fffffffc t6: 800aa4f0 t7: 800af834
t8: 00000080 t9: 800573b4 s0: 00000000 s1: 8f066778
s2: 8f066728 s3: 00000000 s4: 00000000 s5: 8f066e60
s6: 8f0403d4 s7: 00000000 k0: aaaaaaaa k1: aaaaaaaa
gp: 800aaa20 sp: 8f011c50 s8: 00000001 ra: 8f01eb90
sr: 504000e7 mullo: 0000000e mulhi: 000000e0 badvaddr: ffffa16c
cause: 40008010 pc: 00000a04
U-Boot 1.1.6-JNPR-2.1 (Build time: Jul 4 2011 - 03:55:46)
SRX_240_HIGHMEM board revision major:0, minor:31, serial #: AAAM9214
OCTEON CN5230R-SCP pass 2.0, Core clock: 600 MHz, DDR clock: 333 MHz (666 Mhz data rate)
DRAM: 1024 MB
Starting Memory POST...
Checking datalines... OK
Checking address lines... OK
Checking 512K memory for U-Boot... OK.
Running U-Boot CRC Test... OK.
Flash: 4 MB
USB: scanning bus for devices...
Root Hub 0: 4 USB Device(s) found
Root Hub 1: 1 USB Device(s) found
scanning bus for storage devices... 2 Storage Device(s) found
Clearing DRAM........ done
BIST check passed.
1:00:00.0 Vendor/Device ID = 0x811210b5
1:01:07.0 Vendor/Device ID = 0xc72414e4
Boot Media: nand-flash usb
Net: octeth0
POST Passed
Press SPACE to abort autoboot in 1 seconds
ELF file is 32 bit
Loading .text @ 0x8f000078 (245596 bytes)
Loading .rodata @ 0x8f03bfd4 (13940 bytes)
Loading .rodata.str1.4 @ 0x8f03f648 (16648 bytes)
Loading set_Xcommand_set @ 0x8f043750 (100 bytes)
Loading .rodata.cst4 @ 0x8f0437b4 (20 bytes)
Loading .data @ 0x8f044000 (5608 bytes)
Loading .data.rel.ro @ 0x8f0455e8 (120 bytes)
Loading .data.rel @ 0x8f045660 (136 bytes)
Clearing .bss @ 0x8f0456e8 (11656 bytes)
## Starting application at 0x8f000078 ...
Consoles: U-Boot console
Found compatible API, ver. 2.1
FreeBSD/MIPS U-Boot bootstrap loader, Revision 2.1
(builder@chamuth.juniper.net, Mon Jul 4 03:14:10 UTC 2011)
Memory: 1024MB
[2]Booting from usb slice 1
Un-Protected 1 sectors
writing to flash...
Protected 1 sectors
\
can't load '/kernel'
can't load '/kernel.old'
Press Enter to stop auto bootsequencing and to enter loader prompt.