My web management is being accessed from ge-0/0/0 and I need it to be accessed also by ge-1/0/0
I need both allowed. which command I shoould run to add the ge-1/0/0 to the config below?
interface [ vlan.0 ge-0/0/0.0 ];
To add the port your use:
set system services web-management http interface ge-1/0/0.0
You will also need to confirm that the zone which this port is assigned allows the connection as well.
set security zones security-zone NameOfZone host-inbound-traffic system-services http
set security zones security-zone NameOfZone host-inbound-traffic system-services all
Now my last question:
My web-management-url is set "admin".. how do I use this?
my internal IP is 10.196.24.1, so if I put 10.196.24.1/admin is should open the web management?
if yes its not working.
I am using the 8081 port.
Yes, the custom url comes after the ip address. But in your case you also have a custom port which would be added.