Does port mirroring work on SRX340?
I was tried to configure this feature based on this:
but it doesn't work.
I see that couter in filter increase, but I don't see any packets on outging interface.
If You follow this KB, there is a bit of configuration missing, namely, static ARP on port-mirror output interface.
For the KB example config, it would be
set interfaces ge-0/0/1.0 family inet address 184.108.40.206/24 arp 220.127.116.11. mac 0e:00:00:00:00:0e
Please add static ARP entry to Your config, re-test and report back.
I added static ARP but it still doesn't work.
Please send traffic thru ge-0/0/0 and share the following printouts:
show forwarding-options port-mirroring | no-more
show interfaces ge-0/0/0 extensive | no-more
show interfaces ge-0/0/7 extensive | no-more
I attached the file.
root> show forwarding-options port-mirroring | no-moreInstance Name: &global_instanceInstance Id: 1Input parameters:Rate : 1Run-length : 0Maximum-packet-length : 0Output parameters:Family State Destination Next-hopinet down ge-0/0/7.0
but Physical interface is UP.
I noticed that I made a mistake in the subject. It should be SRX340