Hi Jonas,
So now i've got a new /28 > split it up to 2 x /29, on 2 different interfaces.
I got internet connection egress and NAT to private ip ingress on one.
But only internet connection egress on the other.
If i would like to STATIC NAT to a public address on the private side on the firewall, then should I just setup static nat with:
destination address = public ip, prefix = public ip? and then firewall rules.
And should i setup proxy arp?
Thank you.
Original Message:
Sent: 10-14-2020 07:48
From: JONAS HAUGE KLINGENBERG
Subject: Re: public ip behind srx320
Hi Carsten,
yeah you can easily do the same with an irb interface as you would with a physical one. It can be both public and internal addresses, all NAT types works the same and proxy-arp can also be done.