SRX

 View Only
last person joined: 2 days ago 

Ask questions and share experiences about the SRX Series, vSRX, and cSRX.

  • 1.  error: usp_ipc_client_recv: failed to read message from ipc pipe

    Posted 11-04-2020 00:21

    Hi

     

    Does this message the same as issue described in this article?

    https://kb.juniper.net/InfoCenter/index?page=content&id=KB23977&cat=SRX_5800_1&actp=LIST

     

    admin@MY-FW> show security flow session destination-prefix 172.17.42.105    
Flow Sessions on FPC3 PIC0:
Total sessions: 0

Flow Sessions on FPC7 PIC0:
error: usp_ipc_client_recv: failed to read message from ipc pipe

admin@MY-FW> show security flow session destination-prefix 172.17.42.105    
Flow Sessions on FPC3 PIC0:
Total sessions: 0

Flow Sessions on FPC7 PIC0:
error: usp_ipc_client_recv: failed to read message from ipc pipe

admin@MY-FW> show security flow session destination-prefix 172.17.42.105    
Flow Sessions on FPC3 PIC0:
Total sessions: 0

Flow Sessions on FPC7 PIC0:
Total sessions: 0

Flow Sessions on FPC8 PIC0:
Total sessions: 0

Flow Sessions on FPC12 PIC0:
Total sessions: 0

admin@MY-FW> show security flow session destination-prefix 172.17.42.105    
Flow Sessions on FPC3 PIC0:
Total sessions: 0

Flow Sessions on FPC7 PIC0:
Total sessions: 0

Flow Sessions on FPC8 PIC0:
Total sessions: 0

Flow Sessions on FPC12 PIC0:
Total sessions: 0

     

    srx3600  //  12.1X44-D10.4



  • 2.  Re: error: usp_ipc_client_recv: failed to read message from ipc pipe

    Posted 11-04-2020 02:16

    I agree it seems to match the kb but the article is not very helpful in trying to see why it can occur for reasons that require action.

     

    Seems like it might be harmless and might not but they don't give you enough information to determine which is the case.