Intrusion Prevention

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



  • 1.  IDP signature failure and cluster break up

    Posted 01-18-2021 03:58

    Greetings, I have deployed two Juniper srx345 with same OS in cluster, I tried installing IDP signature database on them (offline method) and it failed, also it also broke fabric link between them. I restored fabric link but it's internal SA is disabled, I was wondering if I e-download and install signatre what other dependicies I should keep in my mind so it doesn't break my cluster.

    Model: SRX345
    JuneOS: 18.4R3-S2



    ------------------------------
    MATLOOB AHMED
    ------------------------------


  • 2.  RE: IDP signature failure and cluster break up

     
    Posted 01-18-2021 19:40
    The license install process on clusters has to be done and licensed for both nodes per these procedures.

    https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-chassis-cluster-license-requirements.html

    ------------------------------
    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
    http://puluka.com/home
    ------------------------------