Switching

Tips and Tricks: Ping reply on the virtual IP address when using VRRP

By egtrainer posted 04-27-2016 06:53

  

When you configure VRRP (Virtual Router Redundancy Protocol), the ping reply on the virtual IP address doesn't work by default. You must configure the parameter accept-data to solve the problem.

 

Example on EX4300:

 


set interfaces irb unit 2 family inet address 10.10.1.2/24 vrrp-group 2 virtual-address 10.10.1.1
set interfaces irb unit 2 family inet address 10.10.1.2/24 vrrp-group 2 accept-data

 


#virtualrouterredundancyprotocol
#How-To
0 comments
0 views

Permalink