Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Initializing cgroup subsys cpuacct Linux version 3.10.38-ltsi-rt34-WR6.0.0.12_preempt-rt (builder@svl-junos-p001) (gcc version 4.8.1 (Wind River Linux Sourcery CodeBench 4.8-28) ) #1 SMP PREEMPT RT Wed Dec 2 16:34:33 PST 2015 Command line: BOOT_IMAGE=vmlinuz rootwait max_loop=255 rw clock=pit console=ttyS0,115200 root=/dev/sda2 initrd=initrd Disabled fast string operations e820: BIOS-provided physical RAM map: BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x00000000bfeeffff] usable BIOS-e820: [mem 0x00000000bfef0000-0x00000000bfefefff] ACPI data BIOS-e820: [mem 0x00000000bfeff000-0x00000000bfefffff] ACPI NVS BIOS-e820: [mem 0x00000000bff00000-0x00000000bfffffff] usable BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved BIOS-e820: [mem 0x00000000fffe0000-0x00000000ffffffff] reserved BIOS-e820: [mem 0x0000000100000000-0x00000001bfffffff] usable NX (Execute Disable) protection: active SMBIOS 2.4 present. No AGP bridge found e820: last_pfn = 0x1c0000 max_arch_pfn = 0x400000000 x86 PAT enabled: cpu 0, old 0x0, new 0x7010600070106 e820: last_pfn = 0xc0000 max_arch_pfn = 0x400000000 found SMP MP-table at [mem 0x000f6bf0-0x000f6bff] mapped at [ffff8800000f6bf0] Scanning 1 areas for low memory corruption init_memory_mapping: [mem 0x00000000-0x000fffff] init_memory_mapping: [mem 0x1bfe00000-0x1bfffffff] init_memory_mapping: [mem 0x1bc000000-0x1bfdfffff] init_memory_mapping: [mem 0x180000000-0x1bbffffff] init_memory_mapping: [mem 0x00100000-0xbfeeffff] init_memory_mapping: [mem 0xbff00000-0xbfffffff] init_memory_mapping: [mem 0x100000000-0x17fffffff] RAMDISK: [mem 0x7ff4a000-0x7fffffff] ACPI: RSDP 00000000000f6b80 00024 (v02 PTLTD ) ACPI: XSDT 00000000bfef10c9 0005C (v01 INTEL 440BX 06040000 VMW 01324272) ACPI: FACP 00000000bfefee73 000F4 (v04 INTEL 440BX 06040000 PTL 000F4240) ACPI: DSDT 00000000bfef1395 0DADE (v01 PTLTD Custom 06040000 MSFT 03000001) ACPI: FACS 00000000bfefffc0 00040 ACPI: BOOT 00000000bfef136d 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) ACPI: APIC 00000000bfef1301 0006C (v01 PTLTD ? APIC 06040000 LTP 00000000) ACPI: MCFG 00000000bfef12c5 0003C (v01 PTLTD $PCITBL$ 06040000 LTP 00000001) ACPI: SRAT 00000000bfef11c5 00100 (v02 VMWARE MEMPLUG 06040000 VMW 00000001) ACPI: HPET 00000000bfef118d 00038 (v01 VMWARE VMW HPET 06040000 VMW 00000001) ACPI: WAET 00000000bfef1165 00028 (v01 VMWARE VMW WAET 06040000 VMW 00000001) SRAT: PXM 0 -> APIC 0x00 -> Node 0 SRAT: PXM 0 -> APIC 0x01 -> Node 0 SRAT: PXM 0 -> APIC 0x02 -> Node 0 SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff] SRAT: Node 0 PXM 0 [mem 0x00100000-0x0fffffff] SRAT: Node 0 PXM 0 [mem 0x10000000-0xbfffffff] SRAT: Node 0 PXM 0 [mem 0x100000000-0x1bfffffff] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0x0fffffff] -> [mem 0x00000000-0x0fffffff] NUMA: Node 0 [mem 0x00000000-0x0fffffff] + [mem 0x10000000-0xbfffffff] -> [mem 0x00000000-0xbfffffff] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x1bfffffff] -> [mem 0x00000000-0x1bfffffff] Initmem setup node 0 [mem 0x00000000-0x1bfffffff] NODE_DATA [mem 0x1bfff9000-0x1bfffcfff] Zone ranges: DMA [mem 0x00001000-0x00ffffff] DMA32 [mem 0x01000000-0xffffffff] Normal [mem 0x100000000-0x1bfffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x00001000-0x0009efff] node 0: [mem 0x00100000-0xbfeeffff] node 0: [mem 0xbff00000-0xbfffffff] node 0: [mem 0x100000000-0x1bfffffff] ACPI: PM-Timer IO Port: 0x1008 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: IOAPIC (id[0x03] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 3, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086af01 base: 0xfed00000 smpboot: Allowing 3 CPUs, 0 hotplug CPUs e820: [mem 0xc0000000-0xefffffff] available for PCI devices setup_percpu: NR_CPUS:24 nr_cpumask_bits:24 nr_cpu_ids:3 nr_node_ids:1 PERCPU: Embedded 26 pages/cpu @ffff8801bfc00000 s74432 r8192 d23872 u524288 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1548153 Policy zone: Normal Kernel command line: BOOT_IMAGE=vmlinuz rootwait max_loop=255 rw clock=pit console=ttyS0,115200 root=/dev/sda2 initrd=initrd Warning! clock= boot option is deprecated. Use clocksource=xyz PID hash table entries: 4096 (order: 3, 32768 bytes) Checking aperture... No AGP bridge found Memory: 6107292k/7340032k available (8700k kernel code, 1049032k absent, 183708k reserved, 6548k data, 1172k init) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=3, Nodes=1 Preemptible hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=24 to nr_cpu_ids=3. NR_IRQS:4352 nr_irqs:704 16 Console: colour VGA+ 80x25 console [ttyS0] enabled allocated 100663296 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups tsc: Fast TSC calibration using PIT tsc: Detected 2999.720 MHz processor Calibrating delay loop (skipped), value calculated using timer frequency.. 5999.44 BogoMIPS (lpj=2999720) pid_max: default: 32768 minimum: 301 Security Framework initialized Dentry cache hash table entries: 1048576 (order: 12, 16777216 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys debug Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls Initializing cgroup subsys blkio Initializing cgroup subsys hugetlb Disabled fast string operations mce: CPU supports 0 MCE banks Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32 tlb_flushall_shift: -1 Freeing SMP alternatives: 28k freed ACPI: Core revision 20130328 ACPI: All ACPI Tables successfully acquired ftrace: allocating 30578 entries in 120 pages ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 smpboot: CPU0: Intel(R) Xeon(R) CPU X5450 @ 3.00GHz (fam: 06, model: 17, stepping: 06) Performance Events: 4-deep LBR, Core2 events, core PMU driver. perf_event_intel: CPUID marked event: 'cpu cycles' unavailable perf_event_intel: CPUID marked event: 'instructions' unavailable perf_event_intel: CPUID marked event: 'bus cycles' unavailable perf_event_intel: CPUID marked event: 'cache references' unavailable perf_event_intel: CPUID marked event: 'cache misses' unavailable perf_event_intel: CPUID marked event: 'branch instructions' unavailable perf_event_intel: CPUID marked event: 'branch misses' unavailable ... version: 1 ... bit width: 40 ... generic registers: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 0 ... event mask: 0000000000000003 smpboot: Booting Node 0, Processors #1 #2 OK Disabled fast string operations mce: CPU supports 0 MCE banks Disabled fast string operations mce: CPU supports 0 MCE banks Brought up 3 CPUs smpboot: Total of 3 processors activated (18009.52 BogoMIPS) x86 PAT enabled: cpu 0, old 0x0, new 0x7010600070106 x86 PAT enabled: cpu 2, old 0x0, new 0x7010600070106 x86 PAT enabled: cpu 1, old 0x0, new 0x7010600070106 devtmpfs: initialized PM: Registering ACPI NVS region [mem 0xbfeff000-0xbfefffff] (4096 bytes) xor: measuring software checksum speed prefetch64-sse: 34084.000 MB/sec generic_sse: 10496.000 MB/sec xor: using function: prefetch64-sse (34084.000 MB/sec) pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 ACPI: bus type PCI registered PCI: Using configuration type 1 for base access bio: create slab at 0 raid6: sse2x1 3414 MB/s raid6: sse2x2 6570 MB/s raid6: sse2x4 7898 MB/s raid6: using algorithm sse2x4 (7898 MB/s) raid6: using ssse3x2 recovery algorithm ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored ACPI: Interpreter enabled ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568) ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20130328/hwxface-568) ACPI: (supports S0 S1 S5) ACPI: Using IOAPIC for interrupt routing PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7f]) PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [bus 00-7f] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] pci_bus 0000:00: root bus resource [io 0x0d00-0xfeff] pci 0000:00:07.3: quirk: [io 0x1000-0x103f] claimed by PIIX4 ACPI pci 0000:00:07.3: quirk: [io 0x1040-0x104f] claimed by PIIX4 SMB pci 0000:00:11.0: System wakeup disabled by ACPI pci 0000:00:15.0: System wakeup disabled by ACPI pci 0000:00:15.1: System wakeup disabled by ACPI pci 0000:00:15.2: System wakeup disabled by ACPI pci 0000:00:15.3: System wakeup disabled by ACPI pci 0000:00:15.4: System wakeup disabled by ACPI pci 0000:00:15.5: System wakeup disabled by ACPI pci 0000:00:15.6: System wakeup disabled by ACPI pci 0000:00:15.7: System wakeup disabled by ACPI pci 0000:00:16.0: System wakeup disabled by ACPI pci 0000:00:16.1: System wakeup disabled by ACPI pci 0000:00:16.2: System wakeup disabled by ACPI pci 0000:00:16.3: System wakeup disabled by ACPI pci 0000:00:16.4: System wakeup disabled by ACPI pci 0000:00:16.5: System wakeup disabled by ACPI pci 0000:00:16.6: System wakeup disabled by ACPI pci 0000:00:16.7: System wakeup disabled by ACPI pci 0000:00:17.0: System wakeup disabled by ACPI pci 0000:00:17.1: System wakeup disabled by ACPI pci 0000:00:17.2: System wakeup disabled by ACPI pci 0000:00:17.3: System wakeup disabled by ACPI pci 0000:00:17.4: System wakeup disabled by ACPI pci 0000:00:17.5: System wakeup disabled by ACPI pci 0000:00:17.6: System wakeup disabled by ACPI pci 0000:00:17.7: System wakeup disabled by ACPI pci 0000:00:18.0: System wakeup disabled by ACPI pci 0000:00:18.1: System wakeup disabled by ACPI pci 0000:00:18.2: System wakeup disabled by ACPI pci 0000:00:18.3: System wakeup disabled by ACPI pci 0000:00:18.4: System wakeup disabled by ACPI pci 0000:00:18.5: System wakeup disabled by ACPI pci 0000:00:18.6: System wakeup disabled by ACPI pci 0000:00:18.7: System wakeup disabled by ACPI pci 0000:00:01.0: PCI bridge to [bus 01] pci 0000:02:00.0: System wakeup disabled by ACPI pci 0000:02:01.0: System wakeup disabled by ACPI pci 0000:02:02.0: System wakeup disabled by ACPI pci 0000:00:11.0: PCI bridge to [bus 02] (subtractive decode) pci 0000:00:15.0: PCI bridge to [bus 03] pci 0000:00:15.1: PCI bridge to [bus 04] pci 0000:00:15.2: PCI bridge to [bus 05] pci 0000:00:15.3: PCI bridge to [bus 06] pci 0000:00:15.4: PCI bridge to [bus 07] pci 0000:00:15.5: PCI bridge to [bus 08] pci 0000:00:15.6: PCI bridge to [bus 09] pci 0000:00:15.7: PCI bridge to [bus 0a] pci 0000:00:16.0: PCI bridge to [bus 0b] pci 0000:00:16.1: PCI bridge to [bus 0c] pci 0000:00:16.2: PCI bridge to [bus 0d] pci 0000:00:16.3: PCI bridge to [bus 0e] pci 0000:00:16.4: PCI bridge to [bus 0f] pci 0000:00:16.5: PCI bridge to [bus 10] pci 0000:00:16.6: PCI bridge to [bus 11] pci 0000:00:16.7: PCI bridge to [bus 12] pci 0000:00:17.0: PCI bridge to [bus 13] pci 0000:00:17.1: PCI bridge to [bus 14] pci 0000:00:17.2: PCI bridge to [bus 15] pci 0000:00:17.3: PCI bridge to [bus 16] pci 0000:00:17.4: PCI bridge to [bus 17] pci 0000:00:17.5: PCI bridge to [bus 18] pci 0000:00:17.6: PCI bridge to [bus 19] pci 0000:00:17.7: PCI bridge to [bus 1a] pci 0000:00:18.0: PCI bridge to [bus 1b] pci 0000:00:18.1: PCI bridge to [bus 1c] pci 0000:00:18.2: PCI bridge to [bus 1d] pci 0000:00:18.3: PCI bridge to [bus 1e] pci 0000:00:18.4: PCI bridge to [bus 1f] pci 0000:00:18.5: PCI bridge to [bus 20] pci 0000:00:18.6: PCI bridge to [bus 21] pci 0000:00:18.7: PCI bridge to [bus 22] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x1e) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 14 15) ACPI: Enabled 2 GPEs in block 00 to 0F vgaarb: device added: PCI:0000:00:0f.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:00:0f.0 SCSI subsystem initialized ACPI: bus type ATA registered ACPI: bus type USB registered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti PTP clock support registered Advanced Linux Sound Architecture Driver Initialized. PCI: Using ACPI for IRQ routing nfc: nfc_init: NFC Core ver 0.1 NET: Registered protocol family 39 HPET: 16 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 hpet0: 16 comparators, 64-bit 14.318180 MHz counter Switching to clocksource hpet pnp: PnP ACPI init ACPI: bus type PNP registered system 00:00: [io 0x1000-0x103f] could not be reserved system 00:00: [io 0x1040-0x104f] has been reserved system 00:00: [io 0x0cf0-0x0cf1] has been reserved system 00:07: [mem 0xfed00000-0xfed003ff] has been reserved system 00:0c: [io 0xfce0-0xfcff] has been reserved system 00:0c: [mem 0xf0000000-0xf7ffffff] has been reserved system 00:0c: [mem 0xfe800000-0xfe9fffff] has been reserved pnp: PnP ACPI: found 13 devices ACPI: bus type PNP unregistered pci 0000:00:0f.0: BAR 6: assigned [mem 0xc0000000-0xc0007fff pref] pci 0000:00:15.3: BAR 7: can't assign io (size 0x1000) pci 0000:00:15.4: BAR 7: can't assign io (size 0x1000) pci 0000:00:15.5: BAR 7: can't assign io (size 0x1000) pci 0000:00:15.6: BAR 7: can't assign io (size 0x1000) pci 0000:00:15.7: BAR 7: can't assign io (size 0x1000) pci 0000:00:16.3: BAR 7: can't assign io (size 0x1000) pci 0000:00:16.4: BAR 7: can't assign io (size 0x1000) pci 0000:00:16.5: BAR 7: can't assign io (size 0x1000) pci 0000:00:16.6: BAR 7: can't assign io (size 0x1000) pci 0000:00:16.7: BAR 7: can't assign io (size 0x1000) pci 0000:00:17.3: BAR 7: can't assign io (size 0x1000) pci 0000:00:17.4: BAR 7: can't assign io (size 0x1000) pci 0000:00:17.5: BAR 7: can't assign io (size 0x1000) pci 0000:00:17.6: BAR 7: can't assign io (size 0x1000) pci 0000:00:17.7: BAR 7: can't assign io (size 0x1000) pci 0000:00:18.2: BAR 7: can't assign io (size 0x1000) pci 0000:00:18.3: BAR 7: can't assign io (size 0x1000) pci 0000:00:18.4: BAR 7: can't assign io (size 0x1000) pci 0000:00:18.5: BAR 7: can't assign io (size 0x1000) pci 0000:00:18.6: BAR 7: can't assign io (size 0x1000) pci 0000:00:18.7: BAR 7: can't assign io (size 0x1000) pci 0000:00:18.7: BAR 7: can't assign io (size 0x1000) pci 0000:00:18.6: BAR 7: can't assign io (size 0x1000) pci 0000:00:18.5: BAR 7: can't assign io (size 0x1000) pci 0000:00:18.4: BAR 7: can't assign io (size 0x1000) pci 0000:00:18.3: BAR 7: can't assign io (size 0x1000) pci 0000:00:18.2: BAR 7: can't assign io (size 0x1000) pci 0000:00:17.7: BAR 7: can't assign io (size 0x1000) pci 0000:00:17.6: BAR 7: can't assign io (size 0x1000) pci 0000:00:17.5: BAR 7: can't assign io (size 0x1000) pci 0000:00:17.4: BAR 7: can't assign io (size 0x1000) pci 0000:00:17.3: BAR 7: can't assign io (size 0x1000) pci 0000:00:16.7: BAR 7: can't assign io (size 0x1000) pci 0000:00:16.6: BAR 7: can't assign io (size 0x1000) pci 0000:00:16.5: BAR 7: can't assign io (size 0x1000) pci 0000:00:16.4: BAR 7: can't assign io (size 0x1000) pci 0000:00:16.3: BAR 7: can't assign io (size 0x1000) pci 0000:00:15.7: BAR 7: can't assign io (size 0x1000) pci 0000:00:15.6: BAR 7: can't assign io (size 0x1000) pci 0000:00:15.5: BAR 7: can't assign io (size 0x1000) pci 0000:00:15.4: BAR 7: can't assign io (size 0x1000) pci 0000:00:15.3: BAR 7: can't assign io (size 0x1000) pci 0000:00:01.0: PCI bridge to [bus 01] pci 0000:02:00.0: BAR 6: assigned [mem 0xebb00000-0xebb0ffff pref] pci 0000:02:01.0: BAR 6: assigned [mem 0xebb10000-0xebb1ffff pref] pci 0000:02:02.0: BAR 6: assigned [mem 0xebb20000-0xebb2ffff pref] pci 0000:00:11.0: PCI bridge to [bus 02] pci 0000:00:11.0: bridge window [io 0x2000-0x3fff] pci 0000:00:11.0: bridge window [mem 0xfd500000-0xfdffffff] pci 0000:00:11.0: bridge window [mem 0xebb00000-0xebffffff 64bit pref] pci 0000:00:15.0: PCI bridge to [bus 03] pci 0000:00:15.0: bridge window [io 0x4000-0x4fff] pci 0000:00:15.0: bridge window [mem 0xfd400000-0xfd4fffff] pci 0000:00:15.0: bridge window [mem 0xeba00000-0xebafffff 64bit pref] pci 0000:00:15.1: PCI bridge to [bus 04] pci 0000:00:15.1: bridge window [io 0x8000-0x8fff] pci 0000:00:15.1: bridge window [mem 0xfd000000-0xfd0fffff] pci 0000:00:15.1: bridge window [mem 0xeb600000-0xeb6fffff 64bit pref] pci 0000:00:15.2: PCI bridge to [bus 05] pci 0000:00:15.2: bridge window [io 0xc000-0xcfff] pci 0000:00:15.2: bridge window [mem 0xfcc00000-0xfccfffff] pci 0000:00:15.2: bridge window [mem 0xeb200000-0xeb2fffff 64bit pref] pci 0000:00:15.3: PCI bridge to [bus 06] pci 0000:00:15.3: bridge window [mem 0xfc800000-0xfc8fffff] pci 0000:00:15.3: bridge window [mem 0xeae00000-0xeaefffff 64bit pref] pci 0000:00:15.4: PCI bridge to [bus 07] pci 0000:00:15.4: bridge window [mem 0xfc400000-0xfc4fffff] pci 0000:00:15.4: bridge window [mem 0xeaa00000-0xeaafffff 64bit pref] pci 0000:00:15.5: PCI bridge to [bus 08] pci 0000:00:15.5: bridge window [mem 0xfc000000-0xfc0fffff] pci 0000:00:15.5: bridge window [mem 0xea600000-0xea6fffff 64bit pref] pci 0000:00:15.6: PCI bridge to [bus 09] pci 0000:00:15.6: bridge window [mem 0xfbc00000-0xfbcfffff] pci 0000:00:15.6: bridge window [mem 0xea200000-0xea2fffff 64bit pref] pci 0000:00:15.7: PCI bridge to [bus 0a] pci 0000:00:15.7: bridge window [mem 0xfb800000-0xfb8fffff] pci 0000:00:15.7: bridge window [mem 0xe9e00000-0xe9efffff 64bit pref] pci 0000:00:16.0: PCI bridge to [bus 0b] pci 0000:00:16.0: bridge window [io 0x5000-0x5fff] pci 0000:00:16.0: bridge window [mem 0xfd300000-0xfd3fffff] pci 0000:00:16.0: bridge window [mem 0xeb900000-0xeb9fffff 64bit pref] pci 0000:00:16.1: PCI bridge to [bus 0c] pci 0000:00:16.1: bridge window [io 0x9000-0x9fff] pci 0000:00:16.1: bridge window [mem 0xfcf00000-0xfcffffff] pci 0000:00:16.1: bridge window [mem 0xeb500000-0xeb5fffff 64bit pref] pci 0000:00:16.2: PCI bridge to [bus 0d] pci 0000:00:16.2: bridge window [io 0xd000-0xdfff] pci 0000:00:16.2: bridge window [mem 0xfcb00000-0xfcbfffff] pci 0000:00:16.2: bridge window [mem 0xeb100000-0xeb1fffff 64bit pref] pci 0000:00:16.3: PCI bridge to [bus 0e] pci 0000:00:16.3: bridge window [mem 0xfc700000-0xfc7fffff] pci 0000:00:16.3: bridge window [mem 0xead00000-0xeadfffff 64bit pref] pci 0000:00:16.4: PCI bridge to [bus 0f] pci 0000:00:16.4: bridge window [mem 0xfc300000-0xfc3fffff] pci 0000:00:16.4: bridge window [mem 0xea900000-0xea9fffff 64bit pref] pci 0000:00:16.5: PCI bridge to [bus 10] pci 0000:00:16.5: bridge window [mem 0xfbf00000-0xfbffffff] pci 0000:00:16.5: bridge window [mem 0xea500000-0xea5fffff 64bit pref] pci 0000:00:16.6: PCI bridge to [bus 11] pci 0000:00:16.6: bridge window [mem 0xfbb00000-0xfbbfffff] pci 0000:00:16.6: bridge window [mem 0xea100000-0xea1fffff 64bit pref] pci 0000:00:16.7: PCI bridge to [bus 12] pci 0000:00:16.7: bridge window [mem 0xfb700000-0xfb7fffff] pci 0000:00:16.7: bridge window [mem 0xe9d00000-0xe9dfffff 64bit pref] pci 0000:00:17.0: PCI bridge to [bus 13] pci 0000:00:17.0: bridge window [io 0x6000-0x6fff] pci 0000:00:17.0: bridge window [mem 0xfd200000-0xfd2fffff] pci 0000:00:17.0: bridge window [mem 0xeb800000-0xeb8fffff 64bit pref] pci 0000:00:17.1: PCI bridge to [bus 14] pci 0000:00:17.1: bridge window [io 0xa000-0xafff] pci 0000:00:17.1: bridge window [mem 0xfce00000-0xfcefffff] pci 0000:00:17.1: bridge window [mem 0xeb400000-0xeb4fffff 64bit pref] pci 0000:00:17.2: PCI bridge to [bus 15] pci 0000:00:17.2: bridge window [io 0xe000-0xefff] pci 0000:00:17.2: bridge window [mem 0xfca00000-0xfcafffff] pci 0000:00:17.2: bridge window [mem 0xeb000000-0xeb0fffff 64bit pref] pci 0000:00:17.3: PCI bridge to [bus 16] pci 0000:00:17.3: bridge window [mem 0xfc600000-0xfc6fffff] pci 0000:00:17.3: bridge window [mem 0xeac00000-0xeacfffff 64bit pref] pci 0000:00:17.4: PCI bridge to [bus 17] pci 0000:00:17.4: bridge window [mem 0xfc200000-0xfc2fffff] pci 0000:00:17.4: bridge window [mem 0xea800000-0xea8fffff 64bit pref] pci 0000:00:17.5: PCI bridge to [bus 18] pci 0000:00:17.5: bridge window [mem 0xfbe00000-0xfbefffff] pci 0000:00:17.5: bridge window [mem 0xea400000-0xea4fffff 64bit pref] pci 0000:00:17.6: PCI bridge to [bus 19] pci 0000:00:17.6: bridge window [mem 0xfba00000-0xfbafffff] pci 0000:00:17.6: bridge window [mem 0xea000000-0xea0fffff 64bit pref] pci 0000:00:17.7: PCI bridge to [bus 1a] pci 0000:00:17.7: bridge window [mem 0xfb600000-0xfb6fffff] pci 0000:00:17.7: bridge window [mem 0xe9c00000-0xe9cfffff 64bit pref] pci 0000:00:18.0: PCI bridge to [bus 1b] pci 0000:00:18.0: bridge window [io 0x7000-0x7fff] pci 0000:00:18.0: bridge window [mem 0xfd100000-0xfd1fffff] pci 0000:00:18.0: bridge window [mem 0xeb700000-0xeb7fffff 64bit pref] pci 0000:00:18.1: PCI bridge to [bus 1c] pci 0000:00:18.1: bridge window [io 0xb000-0xbfff] pci 0000:00:18.1: bridge window [mem 0xfcd00000-0xfcdfffff] pci 0000:00:18.1: bridge window [mem 0xeb300000-0xeb3fffff 64bit pref] pci 0000:00:18.2: PCI bridge to [bus 1d] pci 0000:00:18.2: bridge window [mem 0xfc900000-0xfc9fffff] pci 0000:00:18.2: bridge window [mem 0xeaf00000-0xeaffffff 64bit pref] pci 0000:00:18.3: PCI bridge to [bus 1e] pci 0000:00:18.3: bridge window [mem 0xfc500000-0xfc5fffff] pci 0000:00:18.3: bridge window [mem 0xeab00000-0xeabfffff 64bit pref] pci 0000:00:18.4: PCI bridge to [bus 1f] pci 0000:00:18.4: bridge window [mem 0xfc100000-0xfc1fffff] pci 0000:00:18.4: bridge window [mem 0xea700000-0xea7fffff 64bit pref] pci 0000:00:18.5: PCI bridge to [bus 20] pci 0000:00:18.5: bridge window [mem 0xfbd00000-0xfbdfffff] pci 0000:00:18.5: bridge window [mem 0xea300000-0xea3fffff 64bit pref] pci 0000:00:18.6: PCI bridge to [bus 21] pci 0000:00:18.6: bridge window [mem 0xfb900000-0xfb9fffff] pci 0000:00:18.6: bridge window [mem 0xe9f00000-0xe9ffffff 64bit pref] pci 0000:00:18.7: PCI bridge to [bus 22] pci 0000:00:18.7: bridge window [mem 0xfb500000-0xfb5fffff] pci 0000:00:18.7: bridge window [mem 0xe9b00000-0xe9bfffff 64bit pref] NET: Registered protocol family 2 TCP established hash table entries: 65536 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 9, 3670016 bytes) TCP: Hash tables configured (established 65536 bind 65536) TCP: reno registered UDP hash table entries: 4096 (order: 7, 524288 bytes) UDP-Lite hash table entries: 4096 (order: 7, 524288 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. pci 0000:00:00.0: Limiting direct PCI/PCI transfers Trying to unpack rootfs image as initramfs... Freeing initrd memory: 728k freed PCI-DMA: Using software bounce buffering for IO (SWIOTLB) software IO TLB [mem 0xbbef0000-0xbfef0000] (64MB) mapped at [ffff8800bbef0000-ffff8800bfeeffff] Simple Boot Flag at 0x36 set to 0x80 microcode: CPU0 sig=0x10676, pf=0x1, revision=0x60f microcode: CPU1 sig=0x10676, pf=0x1, revision=0x60f microcode: CPU2 sig=0x10676, pf=0x1, revision=0x60f microcode: Microcode Update Driver: v2.00 , Peter Oruba Scanning for low memory corruption every 60 seconds HugeTLB registered 2 MB page size, pre-allocated 0 pages squashfs: version 4.0 (2009/01/31) Phillip Lougher NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered 9p: Installing v9fs 9p2000 file system support bio: create slab at 1 Btrfs loaded msgmni has been set to 11929 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: AC Adapter [ACAD] (on-line) input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button [PWRF] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 440BX Chipset agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x0 [drm] Initialized drm 1.1.0 20060810 brd: module loaded loop: module loaded scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1060 irq 14 ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1068 irq 15 pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI e100: Copyright(c) 1999-2006 Intel Corporation e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI e1000: Copyright (c) 1999-2006 Intel Corporation. ata1.00: ATA-4: VMware Virtual IDE Hard Drive, 00000001, max UDMA/33 ata1.00: 4517888 sectors, multi 16: LBA ata2.00: ATAPI: VMware Virtual IDE CDROM Drive, 00000001, max UDMA/33 ata1.00: configured for UDMA/33 ata2.00: configured for UDMA/33 scsi 0:0:0:0: Direct-Access ATA VMware Virtual I 0000 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 4517888 512-byte logical blocks: (2.31 GB/2.15 GiB) scsi 1:0:0:0: CD-ROM NECVMWar VMware IDE CDR10 1.00 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 1x/1x writer dvd-ram cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 < sda5 sda6 sda7 > sd 0:0:0:0: [sda] Attached SCSI disk e1000 0000:02:00.0 eth0: (PCI:66MHz:32-bit) 00:0c:29:63:b0:ef e1000 0000:02:00.0 eth0: Intel(R) PRO/1000 Network Connection e1000 0000:02:01.0 eth1: (PCI:66MHz:32-bit) 00:0c:29:63:b0:f9 e1000 0000:02:01.0 eth1: Intel(R) PRO/1000 Network Connection tsc: Refined TSC clocksource calibration: 3000.107 MHz Switching to clocksource tsc e1000 0000:02:02.0 eth2: (PCI:66MHz:32-bit) 00:0c:29:63:b0:03 e1000 0000:02:02.0 eth2: Intel(R) PRO/1000 Network Connection e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k e1000e: Copyright(c) 1999 - 2013 Intel Corporation. ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.13.10-k ixgbe: Copyright (c) 1999-2013 Intel Corporation. ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI ixgb: Copyright (c) 1999-2008 Intel Corporation. VMware vmxnet3 virtual NIC driver - version 1.1.30.0-k-NAPI ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver usbcore: registered new interface driver usb-storage usbcore: registered new interface driver usbserial usbcore: registered new interface driver usbserial_generic usbserial: USB Serial support registered for generic usbcore: registered new interface driver ftdi_sio usbserial: USB Serial support registered for FTDI USB Serial Device usbcore: registered new interface driver pl2303 usbserial: USB Serial support registered for pl2303 i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUS] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice usbcore: registered new interface driver wacom input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid10 personality registered for level 10 md: multipath personality registered for level -4 md: faulty personality registered for level -5 device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com cpuidle: using governor ladder usbcore: registered new interface driver usbhid usbhid: USB HID core driver u32 classifier Actions configured nf_conntrack version 0.5.0 (16384 buckets, 65536 max) TCP: cubic registered NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 9pnet: Installing 9P2000 support Key type dns_resolver registered rtc_cmos 00:03: setting system clock to 2016-01-21 08:39:47 UTC (1453365587) ALSA device list: No soundcards found. Freeing unused kernel memory: 1172k freed Write protecting the kernel read-only data: 14336k Freeing unused kernel memory: 1528k freed Freeing unused kernel memory: 584k freed input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input2 INIT: version 2.88 booting uvesafb: VMware, Inc, VMware virtual machine, 2.0, OEM: V M ware, Inc. VBE support 2.0, VBE v2.0 uvesafb: no monitor limits have been set, default refresh rate will be used uvesafb: VBE state buffer size cannot be determined (eax=0x0, err=0) uvesafb: scrolling: redraw mtrr: type mismatch for ec000000,400000 old: write-back new: write-combining mtrr: type mismatch for ec000000,200000 old: write-back new: write-combining mtrr: type mismatch for ec000000,100000 old: write-back new: write-combining mtrr: type mismatch for ec000000,80000 old: write-back new: write-combining mtrr: type mismatch for ec000000,40000 old: write-back new: write-combining mtrr: type mismatch for ec000000,20000 old: write-back new: write-combining mtrr: type mismatch for ec000000,10000 old: write-back new: write-combining mtrr: type mismatch for ec000000,8000 old: write-back new: write-combining mtrr: type mismatch for ec000000,4000 old: write-back new: write-combining mtrr: type mismatch for ec000000,2000 old: write-back new: write-combining mtrr: type mismatch for ec000000,1000 old: write-back new: write-combining Console: switching to colour frame buffer device 80x30 uvesafb: framebuffer at 0xec000000, mapped to 0xffffc90001b00000, using 4096k, total 4096k fb0: VESA VGA frame buffer device Mounting local filesystems... Starting udev udevd[113]: starting version 182 Floppy drive(s): fd0 is 1.44M parport_pc 00:08: reported by Plug and Play ACPI parport0: PC-style at 0x378, irq 7 [PCSPP(,...)] FDC 0 is a post-1991 82077 WARN: conflicting configurations in /etc/fstab and /etc/default/rcS regarding the writability of rootfs. Please fix one of them. Activating swap Starting Bootlog daemon: bootlogd. Initializing random number generator... udev-cache: read-only rootfs, skip generating udev-cache Populating volatile Filesystems. Checking for -/run/lock-. Creating directory -/run/lock-. Checking for -/var/volatile/log-. Creating directory -/var/volatile/log-. Checking for -/var/volatile/tmp-. Creating directory -/var/volatile/tmp-. Target already exists. Skipping. Checking for -/var/lock-. Creating link -/var/lock- pointing to -/run/lock-. Checking for -/var/log-. Creating link -/var/log- pointing to -/var/volatile/log-. Checking for -/var/run-. Creating link -/var/run- pointing to -/run-. Checking for -/var/tmp-. Creating link -/var/tmp- pointing to -/var/volatile/tmp-. Checking for -/tmp-. Creating link -/tmp- pointing to -/var/tmp-. Checking for -/var/lock/subsys-. Creating directory -/var/lock/subsys-. Checking for -/var/log/wtmp-. Creating file -/var/log/wtmp-. Checking for -/var/run/utmp-. Creating file -/var/run/utmp-. Checking for -/etc/resolv.conf-. Creating link -/etc/resolv.conf- pointing to -/var/run/resolv.conf-. Checking for -/var/run/resolv.conf-. Creating file -/var/run/resolv.conf-. Checking for -/var/run/sepermit-. Creating directory -/var/run/sepermit-. Checking for -/var/run/sshd-. Creating directory -/var/run/sshd-. net.ipv4.conf.default.rp_filter = 1 net.ipv4.conf.all.rp_filter = 1 System time was Thu Jan 21 08:39:51 UTC 2016. Setting the System Clock using the Hardware Clock as reference... System Clock set. System local time is now Thu Jan 21 08:39:55 UTC 2016. Starting atd: OK INIT: Entering runlevel: 3 Starting OpenBSD Secure Shell server: sshd generating ssh RSA key... generating ssh ECDSA key... generating ssh DSA key... done. Configuring network interfaces... e1000: ext NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None IPv6: ADDRCONF(NETDEV_UP): ext: link is not ready IPv6: ADDRCONF(NETDEV_CHANGE): ext: link becomes ready e1000: int NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None IPv6: ADDRCONF(NETDEV_UP): int: link is not ready IPv6: ADDRCONF(NETDEV_CHANGE): int: link becomes ready done. Starting rpcbind daemon...done. System time was Thu Jan 21 08:40:57 UTC 2016. Setting the System Clock using the Hardware Clock as reference... System Clock set. System local time is now Thu Jan 21 08:40:53 UTC 2016. Starting ntpd: done Starting syslogd/klogd: done Starting internet superserver: xinetd. Starting crond: OK Stopping Bootlog daemon: bootlogd. Wind River Linux 6.0.0.12 localhost console localhost login: sleep 1 sec Mount partition /etc on /dev/sda5 kjournald starting. Commit interval 5 seconds EXT3-fs (sda5): using internal journal EXT3-fs (sda5): mounted filesystem with ordered data mode Mount partition /var on /dev/sda6 umount: /var: not mounted kjournald starting. Commit interval 5 seconds EXT3-fs (sda6): using internal journal EXT3-fs (sda6): mounted filesystem with ordered data mode Setting up a firewall.... ip_tables: (C) 2000-2006 Netfilter Core Team FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. mount: special device /dev/sdb does not exist Unable to mount USB Device1 /home/pfe/riot/phase2_launch.sh: line 154: /var/jnx/card/local/vm_type: No such file or directory /home/pfe/riot/phase2_launch.sh: line 157: /var/jnx/card/local/type: No such file or directory Waiting for RE to come up RE is up. Downloading mpcsd.... kernel.core_pattern = /var/crash/core.%e.%t.%p.gz sdpy:2345:respawn:/usr/share/pfe/mpcsd.py /var/jnx/card/local/type file not found i2cid is: 2986 /var/jnx/card/local/slot file not found slot is: 0 parent: 981, child: 982 slot is: 0 Spawning mpcsd with PID 982 fpc.core.push.sh: no process found mpc : Sending file... /var/crash/core.J-UKERN.1453319415.2082.gz tnp_hello_tx: no process found cat: can't open '/var/jnx/card/local/type': No such file or directory tx_hello_tx: Failed to get card type defaulting to 0 cat: can't open '/var/jnx/card/local/slot': No such file or directory tx_hello_tx: Failed to get card slot defaulting to 0 tnp_hello_tx: Board type 0 tnp_hello_tx: Board slot 0 var: core.J-UKERN.mpc.1453319415.2082.gz core.J-UKERN.mpc.1453319415.2082.gz file sent SETTING UP DPDK ENVIRONMENT ON Linux localhost 3.10.38-ltsi-rt34-WR6.0.0.12_preempt-rt #1 SMP PREEMPT RT Wed Dec 2 16:34:33 PST 2015 x86_64 GNU/Linux dpdk_setup.sh: line 21: make: command not found Use MSIX interrupt by default Creating /mnt/huge and mounting as hugetlbfs Detected Junos Device type e1000 (82545) bind interface 02:02.0 from UIO fail to enable pci msix, or not enough msix entries uio device registered with irq 10 OK kernel.core_pattern = /var/crash/core.%e.%t.%p.gz Number of CPUs available : 3 Number of PORTs to service : 1 /home/pfe/riot/build/app/riot -c 0x7 -n 2 -- --rx "(0,0,0,1)," --tx "(0,1)," --w "2" --rpio "local,3000,3001" --hostif "local,3002" --bsz "(32,32),(32,32),(32,32)" EAL: Setting up memory... EAL: Ask a virtual area of 0x5e400000 bytes EAL: Virtual area found at 0x7fa51fe00000 (size = 0x5e400000) EAL: Ask a virtual area of 0x200000 bytes EAL: Virtual area found at 0x7fa51fa00000 (size = 0x200000) EAL: Ask a virtual area of 0x200000 bytes EAL: Virtual area found at 0x7fa51f600000 (size = 0x200000) EAL: Ask a virtual area of 0x9f000000 bytes EAL: Virtual area found at 0x7fa480400000 (size = 0x9f000000) EAL: Ask a virtual area of 0x200000 bytes EAL: Virtual area found at 0x7fa480000000 (size = 0x200000) EAL: Ask a virtual area of 0x600000 bytes EAL: Virtual area found at 0x7fa47f800000 (size = 0x600000) EAL: Ask a virtual area of 0x200000 bytes EAL: Virtual area found at 0x7fa47f400000 (size = 0x200000) EAL: Ask a virtual area of 0x200000 bytes EAL: Virtual area found at 0x7fa47f000000 (size = 0x200000) EAL: Ask a virtual area of 0x400000 bytes EAL: Virtual area found at 0x7fa47ea00000 (size = 0x400000) EAL: Ask a virtual area of 0x400000 bytes EAL: Virtual area found at 0x7fa47e400000 (size = 0x400000) EAL: Ask a virtual area of 0x200000 bytes EAL: Virtual area found at 0x7fa47e000000 (size = 0x200000) EAL: Ask a virtual area of 0x400000 bytes EAL: Virtual area found at 0x7fa47da00000 (size = 0x400000) EAL: Ask a virtual area of 0x200000 bytes EAL: Virtual area found at 0x7fa47d600000 (size = 0x200000) EAL: Ask a virtual area of 0x400000 bytes EAL: Virtual area found at 0x7fa47d000000 (size = 0x400000) EAL: Ask a virtual area of 0x200000 bytes EAL: Virtual area found at 0x7fa47cc00000 (size = 0x200000) EAL: Ask a virtual area of 0x200000 bytes EAL: Virtual area found at 0x7fa47c800000 (size = 0x200000) EAL: Ask a virtual area of 0x200000 bytes EAL: Virtual area found at 0x7fa47c400000 (size = 0x200000) EAL: Ask a virtual area of 0x200000 bytes EAL: Virtual area found at 0x7fa47c000000 (size = 0x200000) EAL: Requesting 2048 pages of size 2MB from socket 0 EAL: TSC frequency is ~3000109 KHz EAL: 0000:02:00.0 not managed by UIO driver, skipping EAL: 0000:02:01.0 not managed by UIO driver, skipping CONFIG: --f argument not given : Flow caching will not be enabled INIT: Creating the mbuf pool for socket 0 ... INIT: Creating ring with priority 0 to connect I/O lcore 1 (socket 0) with worker lcore 2 ... INIT: Creating ring with priority 1 to connect I/O lcore 1 (socket 0) with worker lcore 2 ... INIT: Creating ring to connect worker lcore 2 with TX port 0 (through I/O lcore 1) (socket 0) ... INIT: No. of Lpolicer Buckets : 1 INIT: Setting worker Lpolicer: 0 start-idx 0 HOSTIF: Creating ring to connect hostif lcore 0 with worker lcore 2 ... HOSTIF: Creating ring with priority 0 to connect worker lcore 0 (socket 0) with hostif worker lcore 2 ... HOSTIF: Creating ring with priority 1 to connect worker lcore 0 (socket 0) with hostif worker lcore 2 ... CONFIG: Runtime option summary: CONFIG: rx capture port mask : 0x0 CONFIG: rx capture frequency : 1 CONFIG: rx capture length : 128 EAL: 0000:02:00.0 not managed by UIO driver, skipping EAL: 0000:02:01.0 not managed by UIO driver, skipping INIT: Initializing NIC port 0 ... INIT: Initializing NIC port 0 RX queue 0 ... INIT: Initializing NIC port 0 TX queue 0 ... RPIO: Command socket listening on: localhost:3000 RPIO: Event socket listening on: localhost:3001 LU: Initializing LU INIT: Initialization completed. CONFIG: NIC RX ports: CONFIG: 0 (CONFIG: 0 CONFIG: ) CONFIG: ; CONFIG: I/O lcore 1 (socket 0): CONFIG: RX ports CONFIG: (0, 0, 0) CONFIG: ; CONFIG: Output rings CONFIG: Priority : HiCONFIG: 0x7fa51fbcb140 CONFIG: Priority : NorCONFIG: 0x7fa51fbcd1c0 CONFIG: ; CONFIG: Worker lcore 2 (socket 0) ID 0: CONFIG: Input rings CONFIG: Priority : HiCONFIG: 0x1d9a540 CONFIG: 0x1d9a608 CONFIG: Priority : NorCONFIG: 0x1d9a540 CONFIG: ; CONFIG: CONFIG: CONFIG: NIC TX ports: CONFIG: 0 CONFIG: ; CONFIG: I/O lcore 1 (socket 0): CONFIG: Input rings per TX port CONFIG: 0 (CONFIG: 0x7fa51fbcf240 CONFIG: ) CONFIG: ; CONFIG: Worker lcore 2 (socket 0) ID 0: CONFIG: Output rings per TX port CONFIG: 0 (0x7fa51fbcf240) CONFIG: ; CONFIG: Ring sizes: NIC RX = 1024; Worker in = 1024; Worker out = 1024; NIC TX = 1024; CONFIG: Burst sizes: I/O RX (rd = 32, wr = 32); Worker (rd = 32, wr = 32); I/O TX (rd = 32, wr = 32) RUNTIME: Logical core 1 (I/O) main loop. RUNTIME: Logical core 2 (worker 0) main loop. RPIO: Accepted connection from localhost <-> localhost:3000 RPIO: Accepted connection from localhost <-> localhost:3001 RIOT: Received bandwidth config: b/w : 6250000 RIOT: Initializing policer for bank 0, bucket : 0 rate: 6250000 METER: Low level srTCM config: CIR period = 480, CIR bytes per period = 1 RIOT: New policer index: 0 HOSTIF: Accepted connectionRUNTIME: Detected port 0 status changed to UP