term len 0 Labo_Cisco_2950#sh vers Cisco Internetwork Operating System Software IOS (tm) C2950 Software (C2950-I6Q4L2-M), Version 12.1(13)EA1, RELEASE SOFTWARE (fc1) Copyright (c) 1986-2003 by cisco Systems, Inc. Compiled Tue 04-Mar-03 02:14 by yenanh Image text-base: 0x80010000, data-base: 0x805A8000 ROM: Bootstrap program is CALHOUN boot loader Labo_Cisco_2950 uptime is 10 minutes System returned to ROM by power-on System image file is "flash:/c2950-i6q4l2-mz.121-13.EA1.bin" cisco WS-C2950-24 (RC32300) processor (revision G0) with 20839K bytes of memory. Processor board ID FOC0646Z0L0 Last reset from system-reset Running Standard Image 24 FastEthernet/IEEE 802.3 interface(s) 32K bytes of flash-simulated non-volatile configuration memory. Base ethernet MAC Address: 00:0B:5F:76:53:80 Motherboard assembly number: 73-5781-11 Power supply part number: 34-0965-01 Motherboard serial number: FOC064605LU Power supply serial number: PHI06380ENW Model revision number: G0 Motherboard revision number: A0 Model number: WS-C2950-24 System serial number: FOC0646Z0L0 Configuration register is 0xF Labo_Cisco_2950#sh run Building configuration... Current configuration : 2303 bytes ! version 12.1 no service pad service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname Labo_Cisco_2950 ! enable secret 5 $1$tWox$9iQPuS8GPtEts.PZGvlLs. enable password cisco ! ip subnet-zero ! spanning-tree mode pvst no spanning-tree optimize bpdu transmission spanning-tree extend system-id ! ! interface Port-channel1 description === LACP Trunk to Juniper === switchport mode trunk switchport nonegotiate no ip address flowcontrol send off ! interface FastEthernet0/1 switchport access vlan 2 switchport mode access no ip address spanning-tree portfast ! interface FastEthernet0/2 switchport access vlan 3 switchport mode access no ip address ! interface FastEthernet0/3 no ip address ! interface FastEthernet0/4 no ip address ! interface FastEthernet0/5 no ip address ! interface FastEthernet0/6 no ip address ! interface FastEthernet0/7 no ip address ! interface FastEthernet0/8 no ip address ! interface FastEthernet0/9 no ip address ! interface FastEthernet0/10 no ip address ! interface FastEthernet0/11 no ip address ! interface FastEthernet0/12 no ip address ! interface FastEthernet0/13 no ip address ! interface FastEthernet0/14 no ip address ! interface FastEthernet0/15 no ip address ! interface FastEthernet0/16 no ip address ! interface FastEthernet0/17 no ip address ! interface FastEthernet0/18 no ip address ! interface FastEthernet0/19 no ip address ! interface FastEthernet0/20 no ip address ! interface FastEthernet0/21 no ip address ! interface FastEthernet0/22 description === LACP Trunk uplink to Juniper === switchport mode trunk switchport nonegotiate no ip address channel-group 1 mode active channel-protocol lacp ! interface FastEthernet0/23 description === LACP Trunk uplink to Juniper === switchport mode trunk switchport nonegotiate no ip address channel-group 1 mode active channel-protocol lacp ! interface FastEthernet0/24 description === Single Trunk uplink to Juniper === switchport mode trunk no ip address ! interface Vlan1 no ip address no ip route-cache shutdown ! interface Vlan2 ip address 192.168.2.20 255.255.255.0 no ip route-cache ! ip default-gateway 192.168.2.1 ip http server ! ! line con 0 line vty 0 4 password cisco login line vty 5 15 login ! end Labo_Cisco_2950#sh la Labo_Cisco_2950#sh lacp ? <1-6> Channel group number counters Traffic information internal Internal information neighbor Neighbor information sys-id LACP System ID Labo_Cisco_2950#sh lacp 1 % Incomplete command. Labo_Cisco_2950#sh lacp 1 ? counters Traffic information internal Internal information neighbor Neighbor information Labo_Cisco_2950#sh lacp 1 cou LACPDUs Marker Marker Response LACPDUs Port Sent Recv Sent Recv Sent Recv Pkts Err --------------------------------------------------------------------- Channel group: 1 Fa0/22 462 20 0 0 0 0 0 Fa0/23 481 24 0 0 0 0 0 Labo_Cisco_2950#sh lacp 1 cou LACPDUs Marker Marker Response LACPDUs Port Sent Recv Sent Recv Sent Recv Pkts Err --------------------------------------------------------------------- Channel group: 1 Fa0/22 468 21 0 0 0 0 0 Fa0/23 487 25 0 0 0 0 0 Labo_Cisco_2950#sh lacp 1 ne Flags: S - Device is sending Slow LACPDUs F - Device is sending Fast LACPDUs A - Device is in Active mode P - Device is in Passive mode Channel group 1 neighbors Partner's information: Partner Partner Partner Port System ID Port Number Age Flags Fa0/22 00000,0019.e251.b080 0x20F 5s FA LACP Partner Partner Partner Port Priority Oper Key Port State 127 0x1 0x3F Partner's information: Partner Partner Partner Port System ID Port Number Age Flags Fa0/23 00000,0019.e251.b080 0x20E 4s FA LACP Partner Partner Partner Port Priority Oper Key Port State 127 0x1 0x3F Labo_Cisco_2950# Labo_Cisco_2950#sh lacp 1 ? counters Traffic information internal Internal information neighbor Neighbor information Labo_Cisco_2950#sh lacp 1 in Flags: S - Device is sending Slow LACPDUs F - Device is sending Fast LACPDUs A - Device is in Active mode P - Device is in Passive mode Channel group 1 LACP port Admin Oper Port Port Port Flags State Priority Key Key Number State Fa0/22 SA bndl 32768 0x1 0x1 0x15 0x3D Fa0/23 SA bndl 32768 0x1 0x1 0x16 0x3D Labo_Cisco_2950# Labo_Cisco_2950# Labo_Cisco_2950# Labo_Cisco_2950#sh lacp ,ei ^ % Invalid input detected at '^' marker. Labo_Cisco_2950#sh lacp nei Flags: S - Device is sending Slow LACPDUs F - Device is sending Fast LACPDUs A - Device is in Active mode P - Device is in Passive mode Channel group 1 neighbors Partner's information: Partner Partner Partner Port System ID Port Number Age Flags Fa0/22 00000,0019.e251.b080 0x20F 20s FA LACP Partner Partner Partner Port Priority Oper Key Port State 127 0x1 0x3F Partner's information: Partner Partner Partner Port System ID Port Number Age Flags Fa0/23 00000,0019.e251.b080 0x20E 18s FA LACP Partner Partner Partner Port Priority Oper Key Port State 127 0x1 0x3F Labo_Cisco_2950# Labo_Cisco_2950# Labo_Cisco_2950# Labo_Cisco_2950#sh eth Labo_Cisco_2950#sh etherchannel 1 % Incomplete command. Labo_Cisco_2950#sh etherchannel 1 ? brief Brief information detail Detail information port Port information port-channel Port-channel information protocol protocol enabled summary One-line summary per channel-group Labo_Cisco_2950#sh etherchannel 1 de Group state = L2 Ports: 2 Maxports = 16 Port-channels: 1 Max Port-channels = 16 Protocol: LACP Ports in the group: ------------------- Port: Fa0/22 ------------ Port state = Up Mstr In-Bndl Channel group = 1 Mode = Active Gcchange = - Port-channel = Po1 GC = - Pseudo port-channel = Po1 Port index = 0 Load = 0x00 Protocol = LACP Flags: S - Device is sending Slow LACPDUs F - Device is sending fast LACPDUs. A - Device is in active mode. P - Device is in passive mode. Local information: LACP port Admin Oper Port Port Port Flags State Priority Key Key Number State Fa0/22 SA bndl 32768 0x1 0x1 0x15 0x3D Partner's information: Partner Partner Partner Port System ID Port Number Age Flags Fa0/22 00000,0019.e251.b080 0x20F 29s FA LACP Partner Partner Partner Port Priority Oper Key Port State 127 0x1 0x3F Age of the port in the current state: 00d:00h:03m:27s Port: Fa0/23 ------------ Port state = Up Mstr In-Bndl Channel group = 1 Mode = Active Gcchange = - Port-channel = Po1 GC = - Pseudo port-channel = Po1 Port index = 0 Load = 0x00 Protocol = LACP Flags: S - Device is sending Slow LACPDUs F - Device is sending fast LACPDUs. A - Device is in active mode. P - Device is in passive mode. Local information: LACP port Admin Oper Port Port Port Flags State Priority Key Key Number State Fa0/23 SA bndl 32768 0x1 0x1 0x16 0x3D Partner's information: Partner Partner Partner Port System ID Port Number Age Flags Fa0/23 00000,0019.e251.b080 0x20E 28s FA LACP Partner Partner Partner Port Priority Oper Key Port State 127 0x1 0x3F Age of the port in the current state: 00d:00h:03m:26s Port-channels in the group: ---------------------- Port-channel: Po1 (Primary Aggregator) ------------ Age of the Port-channel = 00d:00h:11m:08s Logical slot/port = 1/0 Number of ports = 2 HotStandBy port = null Port state = Port-channel Ag-Inuse Protocol = LACP Ports in the Port-channel: Index Load Port EC state ------+------+------+------------ 0 00 Fa0/22 Active 0 00 Fa0/23 Active Time since last port bundled: 00d:00h:03m:27s Fa0/23 Time since last port Un-bundled: 00d:00h:03m:29s Fa0/23 Labo_Cisco_2950# Labo_Cisco_2950# Labo_Cisco_2950# Labo_Cisco_2950# Labo_Cisco_2950# Labo_Cisco_2950#