Booting... Trying Config: CMD:0x40 Available Memory on Channel0 [2048MB] Skipping clock programming - DRAM channels 0 and 2 share a PLL. Trying Config: CMD:0x40 Available Memory on Channel2 [2048MB] Partition [0,0] DRAM MATS Passed U-Boot 1.1.6 (Build time: Aug 31 2013 - 12:36:40) CPU Frequency = 1200000000Hz DRAM: 183 MB Flash: 8 MB PCIE: [4RCx1] Mode Detected USB: scanning bus for devices... 2 USB Device(s) found scanning bus for storage devices... 1 Storage Device(s) found Net: gmac0, gmac1, gmac2, gmac3, gmac4, gmac5, gmac6, gmac7 ELF file is 32 bit Loading .text @ 0x8f0000a0 (245216 bytes) Loading .rodata @ 0x8f03be80 (14112 bytes) Loading .reginfo @ 0x8f03f5a0 (24 bytes) Loading .rodata.str1.4 @ 0x8f03f5b8 (15924 bytes) Loading set_Xcommand_set @ 0x8f0433ec (96 bytes) Loading .data @ 0x8f044000 (5728 bytes) Loading .data.rel.ro @ 0x8f045660 (120 bytes) Loading .data.rel @ 0x8f0456d8 (136 bytes) Clearing .bss @ 0x8f045760 (8496 bytes) ## Starting application at 0x8f0000a0 ... Resetting state for secondary cpus 0xffe....DONE Consoles: U-Boot console FreeBSD/MIPS U-Boot bootstrap loader, Revision 0.1 (dc-builder@svl-cdbu-pool008.juniper.net, Sat Aug 31 12:35:49 PDT 2013) Memory: 183MB Loading /boot/defaults/loader.conf /kernel data=0xb8d154+0x1198b24 syms=[0x4+0xa2bb0+0x4+0xf5a3c] - Hit [Enter] to boot immediately, or space bar for command prompt. Booting [/kernel]... Kernel entry at 0x801000c0 ... Sanity Check pass on prom_info @ 0x81d9c528 init regular console GDB: debug ports: sio GDB: current port: sio KDB: debugger backends: ddb gdb kdm KDB: current backend: ddb Running in PARTITIONED TLB MODE Copyright (c) 1996-2018, Juniper Networks, Inc. All rights reserved. Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. JUNOS 15.1R7.9 #0: 2018-09-11 05:40:56 UTC builder@watatsumi.juniper.net:/volume/build/junos/15.1/release/15.1R7.9/obj/xlr/junos/bsd/kernels/JUNIPER-QFX/kernel WARNING: debug.mpsafenet forced to 0 as ipsec requires Giant can't re-use a leaf (nssu_upgraded)! JUNOS 15.1R7.9 #0: 2018-09-11 05:40:56 UTC builder@watatsumi.juniper.net:/volume/build/junos/15.1/release/15.1R7.9/obj/xlr/junos/bsd/kernels/JUNIPER-QFX/kernel real memory = 14566330044776458 (10305409678485750084K bytes) avail memory = 2748231680 (2620MB) FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs Security policy loaded: JUNOS MAC/pcap (mac_pcap) Security policy loaded: JUNOS MAC/runasnonroot (mac_runasnonroot) Security policy loaded: Junos MAC/veriexec (mac_veriexec) MAC/veriexec fingerprint module loaded: SHA256 MAC/veriexec fingerprint module loaded: SHA1 netisr_init: !debug_mpsafenet, forcing maxthreads from 12 to 1 ETHERNET SOCKET BRIDGE initialising fpga driver loaded, 0 (null) FXPCI warning: hw.pci.enable_static_config is not set. Creating PCI Scan thread kdm_kcore: read offset (0) status from eeprom (6) Reboot reason(s): 0x400:bios auto recovery reset : RMI's XLR CPU Rev. 0.3 with no FPU implemented L1 Cache: I size 32kb(32 line), D size 32kb(32 line), eight way. L2 Cache: Size 1024kb, eight way 16550A, console usb0: EHCI version 1.0 usb0: USB revision 2.0 uhub0: 2 ports with 2 removable, self powered Timecounter "mips" frequency 1200000000 Hz quality 0 Timecounter "xlr_pic_timer" frequency 66666666 Hz quality 1 Loading the NETPFE fc module Loading Redundant LT driver Registered AMT tunnel Encap with UDP Tunnel! ###PCB Group initialized for udppcbgroup ###PCB Group initialized for tcppcbgroup Kernel thread "wkupdaemon" (pid 82) exited prematurely. da0 at umass-sim0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-4 device da0: 40.000MB/s transfers da0: 7678MB (15724544 512 byte sectors: 255H 63S/T 978C) Trying to mount root from ufs:/dev/da0s1a WARNING: /instrootmnt was not properly dismounted Attaching /packages/jbase via /dev/mdctl... Mounted jbase package on /dev/md0... Verified manifest signed by PackageProductionEc_2018 method ECDSA256+SHA256 Verified jboot signed by PackageProductionEc_2018 method ECDSA256+SHA256 Verified jbase-15.1R7.9 signed by PackageProductionEc_2018 method ECDSA256+SHA256 Mounted jkernel package on /dev/md2... Verified manifest signed by PackageProductionEc_2018 method ECDSA256+SHA256 Verified jkernel-qfx-3-15.1R7.9 signed by PackageProductionEc_2018 method ECDSA256+SHA256 Mounted jdocs package on /dev/md4... Verified manifest signed by PackageProductionEc_2018 method ECDSA256+SHA256 Verified jdocs-qfx-15.1R7.9 signed by PackageProductionEc_2018 method ECDSA256+SHA256 Mounted jroute package on /dev/md6... Verified manifest signed by PackageProductionEc_2018 method ECDSA256+SHA256 Verified jroute-qfx-3-15.1R7.9 signed by PackageProductionEc_2018 method ECDSA256+SHA256 Executing /packages/mnt/jroute-qfx-3-15.1R7.9/mount.post.. Mounted jcrypto package on /dev/md8... Verified manifest signed by PackageProductionEc_2018 method ECDSA256+SHA256 Verified jcrypto-qfx-15.1R7.9 signed by PackageProductionEc_2018 method ECDSA256+SHA256 Mounted jswitch package on /dev/md10... Verified manifest signed by PackageProductionEc_2018 method ECDSA256+SHA256 Verified jswitch-qfx-3-15.1R7.9 signed by PackageProductionEc_2018 method ECDSA256+SHA256 Mounted py-base-xlr package on /dev/md12... Verified manifest signed by PackageProductionEc_2018 method ECDSA256+SHA256 Verified py-base-xlr-15.1R7.9 signed by PackageProductionEc_2018 method ECDSA256+SHA256 swapon: adding /dev/da0s3b as swap device Checking sanity of /var/tmp [ /dev/da0s3d ] ... done (full) Disabling soft update on /var/tmp [ /dev/da0s3d ] ... done Checking sanity of /var [ /dev/da0s1f ] ... done (full) Disabling soft update on /var [ /dev/da0s1f ] ... done Checking sanity of /config [ /dev/da0s3e ] ... done (full) Disabling soft update on /config [ /dev/da0s3e ] ... done Checking sanity of /var/shared [ /dev/da0s3f ] ... done (full) Disabling soft update on /var/shared [ /dev/da0s3f ] ... done Checking sanity of /var/rundb [ /dev/da0s3g ] ... done (full) Disabling soft update on /var/rundb [ /dev/da0s3g ] ... done Checking sanity of / [ /dev/da0s1a ] ... done (full) Disabling soft update on / [ /dev/da0s1a ] ... dSone ystem booted successfully to single user Automatic reboot in progress... df: /var/rundb: No such file or directory FILE SYSTEM CLEAN; SKIPPING CHECKS clean, 128931 free (19 frags, 16114 blocks, 0.0% fragmentation) FILE SYSTEM CLEAN; SKIPPING CHECKS clean, 110333 free (13 frags, 13790 blocks, 0.0% fragmentation) FILE SYSTEM CLEAN; SKIPPING CHECKS clean, 515347 free (27 frags, 64415 blocks, 0.0% fragmentation) FILE SYSTEM CLEAN; SKIPPING CHECKS clean, 1248980 free (28 frags, 156119 blocks, 0.0% fragmentation) rm: /var/etc/pam.conf: Operation not permitted ln: /var/db/dcd.snmp_ix: File exists ln: /var/db/snmp_engine.db: File exists Creating initial configuration...mgd: error: Cannot open configuration file: /config/juniper.conf mgd: warning: activating factory configuration mgd: commit complete Setting initial options: debugger_on_panic=NO debugger_on_break=NO. Starting optional daemons: kdm. Doing initial network setup:. Initial interface configuration: additional daemons:. Additional routing options:kern.module_path: /boot//kernel;/boot/modules -> /boot/moduleks;/modules/peertlype;/modules/ifpdfe_drv;/modules/lplatform;/moduleos; kld netpfe darv: ifpfed_irbd: Unsupported file type ifpfed_ltkldload: Unsupported file type ifpfed_ml_cmnkldload: Unsupported file type ifpfed_ppeerkldload: Unsupported file type ifpfed_svcskldload: Unsupported file type ifpfed_vtkldload: Unsupported file type kld platform: dc_ifpfekldload: Unsupported file type Loading the DC Platform NETPFE module kld peertype: peertype_fxpckldload: Unsupported file type peertype_hcmkldload: Unsupported file type peertype_sfikldload: Unsupported file type peertype_slaverekldload: Unsupported file type grat_arp_on_ifup=YES: net.link.ether.inet.grat_arp_on_kifup: l1dload: Unsupported file type -> 1 ipsec kldkldload: Unsupported file type kats kldkldload: Unsupported file type kldload: Unsupported file type IPsec: Initialized Security Association Processing. . Doing additional network setup:. Starting final network daemons:. kldload: Unsupported file type machdep.bootsuccess: 0 -> 1 hw.dcf.auto_upgrade_enabled: 0 -> 1 sysctl: unknown oid 'hw.re.tvp_mode' [: -eq: unexpected operator setting ldconfig path: /usr/lib /opt/lib starting standard daemons: cron. Local package initialization: kdm. kern.securelevel: -1 -> 1 starting local daemons:set cores for group access . Thu Nov 10 10:54:08 UTC 2022 login: [Disconnected]