Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Linux agpgart interface v0.103 [drm] Initialized drm 1.1.0 20060810 brd: module loaded loop: module loaded vda: vda1 vda2 vda3 < vda5 vda6 vda7 > hv_vmbus: registering driver hv_storvsc scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc200 irq 14 ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc208 irq 15 pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 ata2.00: configured for MWDMA2 scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray cdrom: Uniform CD-ROM driver Revision: 3.20 e100: Copyright(c) 1999-2006 Intel Corporation e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI e1000: Copyright (c) 1999-2006 Intel Corporation. e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k e1000e: Copyright(c) 1999 - 2013 Intel Corporation. ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.13.10-k ixgbe: Copyright (c) 1999-2013 Intel Corporation. ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI ixgb: Copyright (c) 1999-2008 Intel Corporation. VMware vmxnet3 virtual NIC driver - version 1.1.30.0-k-NAPI hv_vmbus: registering driver hv_netvsc ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver usbcore: registered new interface driver usb-storage usbcore: registered new interface driver usbserial usbcore: registered new interface driver usbserial_generic usbserial: USB Serial support registered for generic usbcore: registered new interface driver ftdi_sio usbserial: USB Serial support registered for FTDI USB Serial Device usbcore: registered new interface driver pl2303 usbserial: USB Serial support registered for pl2303 i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice usbcore: registered new interface driver wacom input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 rtc_cmos 00:00: RTC can wake from S4 rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 rtc_cmos 00:00: alarms up to one day, y3k, 114 bytes nvram, hpet irqs md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid10 personality registered for level 10 md: multipath personality registered for level -4 md: faulty personality registered for level -5 device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com cpuidle: using governor ladder hv_vmbus: registering driver hid_hyperv usbcore: registered new interface driver usbhid usbhid: USB HID core driver hv_utils: Registering HyperV Utility Driver hv_vmbus: registering driver hv_util hv_vmbus: registering driver hv_balloon u32 classifier Actions configured nf_conntrack version 0.5.0 (16384 buckets, 65536 max) TCP: cubic registered NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 9pnet: Installing 9P2000 support Key type dns_resolver registered registered taskstats version 1 rtc_cmos 00:00: setting system clock to 2022-12-13 12:39:40 UTC (1670935180) ALSA device list: No soundcards found. Freeing unused kernel memory: 1272k freed Write protecting the kernel read-only data: 14336k Freeing unused kernel memory: 1188k freed Freeing unused kernel memory: 448k freed mount: mounting /dev/sda2 on /mnt failed: No such file or directory input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2 INIT: version 2.88 booting uvesafb: SeaBIOS Developers, SeaBIOS VBE Adapter, Rev. 1, OEM: SeaBIOS VBE(C) 2011, VBE v3.0 uvesafb: no monitor limits have been set, default refresh rate will be used uvesafb: scrolling: redraw Console: switching to colour frame buffer device 80x30 uvesafb: framebuffer at 0xfd000000, mapped to 0xffffc90000d80000, using 16384k, total 16384k fb0: VESA VGA frame buffer device Mounting local filesystems... Starting udev udevd[151]: starting version 182 parport_pc 00:04: reported by Plug and Play ACPI Floppy drive(s): fd0 is 2.88M AMI BIOS parport0: PC-style at 0x378, irq 7 [PCSPP(,...)] FDC 0 is a S82078B WARN: conflicting configurations in /etc/fstab and /etc/default/rcS regarding the writability of rootfs. Please fix one of them. Activating swap Starting Bootlog daemon: bootlogd. Initializing random number generator... udev-cache: read-only rootfs, skip generating udev-cache Populating volatile Filesystems. Checking for -/run/lock-. Creating directory -/run/lock-. Checking for -/var/volatile/log-. Creating directory -/var/volatile/log-. Checking for -/var/volatile/tmp-. Creating directory -/var/volatile/tmp-. Target already exists. Skipping. Checking for -/var/lock-. Creating link -/var/lock- pointing to -/run/lock-. Checking for -/var/log-. Creating link -/var/log- pointing to -/var/volatile/log-. Checking for -/var/run-. Creating link -/var/run- pointing to -/run-. Checking for -/var/tmp-. Creating link -/var/tmp- pointing to -/var/volatile/tmp-. Checking for -/tmp-. Creating link -/tmp- pointing to -/var/tmp-. Checking for -/var/lock/subsys-. Creating directory -/var/lock/subsys-. Checking for -/var/log/wtmp-. Creating file -/var/log/wtmp-. Checking for -/var/run/utmp-. Creating file -/var/run/utmp-. Checking for -/etc/resolv.conf-. Creating link -/etc/resolv.conf- pointing to -/var/run/resolv.conf-. Checking for -/var/run/resolv.conf-. Creating file -/var/run/resolv.conf-. Checking for -/var/run/sepermit-. Creating directory -/var/run/sepermit-. Checking for -/var/run/sshd-. Creating directory -/var/run/sshd-. net.ipv4.conf.default.rp_filter = 1 net.ipv4.conf.all.rp_filter = 1 System time was Tue Dec 13 12:39:44 UTC 2022. Setting the System Clock using the Hardware Clock as reference... System Clock set. System local time is now Tue Dec 13 12:39:45 UTC 2022. Starting atd: OK INIT: Entering runlevel: 3 Starting OpenBSD Secure Shell server: sshd generating ssh RSA key... generating ssh ECDSA key... generating ssh DSA key... done. Configuring network interfaces... IPv6: ADDRCONF(NETDEV_UP): ext: link is not ready ifup: ignoring unknown interface int Starting rpcbind daemon...done. System time was Tue Dec 13 12:40:49 UTC 2022. Setting the System Clock using the Hardware Clock as reference... System Clock set. System local time is now Tue Dec 13 12:40:50 UTC 2022. Starting ntpd: done Starting syslogd/klogd: done Starting internet superserver: xinetd. Starting crond: OK Stopping Bootlog daemon: bootlogd. Wind River Linux 6.0.0.13 localhost console localhost login: sleep 1 sec Mount partition /etc on /dev/vda5 kjournald starting. Commit interval 5 seconds EXT3-fs (vda5): using internal journal EXT3-fs (vda5): recovery complete EXT3-fs (vda5): mounted filesystem with ordered data mode Mount partition /var on /dev/vda6 umount: /var: not mounted kjournald starting. Commit interval 5 seconds EXT3-fs (vda6): using internal journal EXT3-fs (vda6): recovery complete EXT3-fs (vda6): mounted filesystem with ordered data mode Setting up a firewall.... ip_tables: (C) 2000-2006 Netfilter Core Team FAT-fs (vda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. mount: no medium found on /dev/sr0 /home/pfe/riot/phase2_launch.sh: line 231: /var/jnx/card/local/vm_type: No such file or directory /home/pfe/riot/phase2_launch.sh: line 234: /var/jnx/card/local/type: No such file or directory 0:2345:respawn:/sbin/mingetty tty0 tty0 INIT: cannot execute "/usr/share/pfe/mpcsd.py" INIT: cannot execute "/usr/share/pfe/mpcsd.py" INIT: cannot execute "/usr/share/pfe/mpcsd.py" INIT: cannot execute "/usr/share/pfe/mpcsd.py" INIT: cannot execute "/usr/share/pfe/mpcsd.py" INIT: cannot execute "/usr/share/pfe/mpcsd.py" INIT: cannot execute "/usr/share/pfe/mpcsd.py" INIT: cannot execute "/usr/share/pfe/mpcsd.py" INIT: cannot execute "/usr/share/pfe/mpcsd.py" INIT: cannot execute "/usr/share/pfe/mpcsd.py" INIT: Id "sdpy" respawning too fast: disabled for 5 minutes Wind River Linux 6.0.0.13 localhost console localhost login: root Password: Last login: Tue Dec 13 12:35:45 UTC 2022 on console root@localhost:~# cli -sh: cli: command not found root@localhost:~# kernel.core_pattern = /var/crash/core.%e.%t.%p.gz sdpy:2345:respawn:/usr/share/pfe/mpcsd.py /var/jnx/card/local/type file not found i2cid is: 2986 /var/jnx/card/local/slot file not found slot: 0 upgrade_skip: 0 parent: 939, child: 942 Spawning mpcsd with PID 942 fpc.core.push.sh: no process found mpc : tnp_hello_tx: no process found cat: can't open '/var/jnx/card/local/type': No such file or directory tx_hello_tx: Failed to get card type defaulting to 0 cat: can't open '/var/jnx/card/local/slot': No such file or directory tx_hello_tx: Failed to get card slot defaulting to 0 tnp_hello_tx: Board type 0 tnp_hello_tx: Board slot 0 tnp_hello_tx: found interface int Linux localhost 3.10.55-ltsi-rt55-WR6.0.0.13_preempt-rt #1 SMP PREEMPT RT Wed Sep 13 15:06:24 PDT 2017 x86_64 GNU/Linux igb_uio: Use MSIX interrupt by default cat: can't open '/var/jnx/card/local/type': No such file or directory igb_uio 0000:00:03.2: uio device registered with irq 30 igb_uio 0000:00:03.3: uio device registered with irq 31 igb_uio 0000:00:03.4: uio device registered with irq 32 igb_uio 0000:00:03.5: uio device registered with irq 33 igb_uio 0000:00:03.6: uio device registered with irq 34 igb_uio 0000:00:03.7: uio device registered with irq 35 igb_uio 0000:00:04.0: uio device registered with irq 36 igb_uio 0000:00:04.1: uio device registered with irq 37 igb_uio 0000:00:04.2: uio device registered with irq 38 igb_uio 0000:00:04.3: uio device registered with irq 39 OK 0x0BAA cat: can't open '/var/jnx/card/local/type': No such file or directory VMXT not running. sleeping EAL: WARNING: cpu flags constant_tsc=yes nonstop_tsc=no -> using unreliable clock cycles ! config file /etc/riot/init.conf config file /etc/riot/runtime.conf Disabled QOS Disabled AlternatePriorityMode Unable to open config file /etc/riot/shadow VMXT not running. sleeping rte_eth_dev_config_restore: port 0: MAC address array not supported rte_eth_dev_config_restore: port 1: MAC address array not supported rte_eth_dev_config_restore: port 2: MAC address array not supported rte_eth_dev_config_restore: port 3: MAC address array not supported rte_eth_dev_config_restore: port 4: MAC address array not supported rte_eth_dev_config_restore: port 5: MAC address array not supported rte_eth_dev_config_restore: port 6: MAC address array not supported rte_eth_dev_config_restore: port 7: MAC address array not supported rte_eth_dev_config_restore: port 8: MAC address array not supported rte_eth_dev_config_restore: port 9: MAC address array not supported VMXT not running. sleeping cat: can't open '/etc/vmxt/init.conf': No such file or directory cat: can't open '/boot/loader.conf': No such file or directory cat: can't open '/etc/vmxt/init.conf': No such file or directory cat: can't open '/boot/loader.conf': No such file or directory cat: can't open '/etc/vmxt/init.conf': No such file or directory cat: can't open '/boot/loader.conf': No such file or directory cat: can't open '/etc/vmxt/init.conf': No such file or directory cat: can't open '/boot/loader.conf': No such file or directory ls: /etc/smpc_config.txt: No such file or directory VMXT Running. Starting afi-server rte_eth_dev_set_mc_addr_list: Function not supported rte_eth_dev_set_mc_addr_list: Function not supported rte_eth_dev_set_mc_addr_list: Function not supported rte_eth_dev_set_mc_addr_list: Function not supported rte_eth_dev_set_mc_addr_list: Function not supported rte_eth_dev_set_mc_addr_list: Function not supported rte_eth_dev_set_mc_addr_list: Function not supported rte_eth_dev_set_mc_addr_list: Function not supported rte_eth_dev_set_mc_addr_list: Function not supported rte_eth_dev_set_mc_addr_list: Function not supported