request system zeroize warning: System will be rebooted and may not boot without configuration Erase all data, including configuration and log files? [yes,no] (no) yes warning: ipsec-key-management subsystem not running - not needed by configuration. warning: zeroizing fpc0 Mar 1 09:33:47 jlaunchd: cron (PID 6337) terminate signal 15 sent Mar 1 09:33:47 jlaunchd: multicast-snooping (PID 6339) terminate signal 15 sent Mar 1 09:33:47 jlaunchd: jsd (PID 6350) terminate signal 15 sent Mar 1 09:33:47 jlaunchd: na-mqtt (PID 6355) terminate signal 15 sent Mar 1 09:33:47 jlaunchd: mgd-api (PID 6357) terminate signal 15 sent Mar 1 09:33:47 jlaunchd: xmlproxyd (PID 6359) terminate signal 15 sent Mar 1 09:33:47 jlaunchd: analytics-agent (PID 6364) terminate signal 15 sent Mar 1 09:33:47 jlaunchd: na-grpc-server (PID 6365) terminate signal 15 sent Mar 1 09:33:47 jlaunchd: pki-service (PID 6368) terminate signal 15 sent Mar 1 09:33:47 jlaunchd: interface-control (PID 6372) terminate signal 15 sent Mar 1 09:33:47 jlaunchd: license-service (PIWaiting (max 60 seconds) for system process `vnlru' to stop... done Waiting (max 60 seconds) for system process `bufdaemon' to stop... done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining... 1 0 0 0 0 done All buffers synced. Uptime: 2d11h22m29s Khelp module "jsocket" can't unload until its refcount drops from 5 to 0. Rebooting... U-Boot 2016.01-rc1 (Sep 01 2016 - 16:00:13 -0700) VERSION=1.3.0 U-Boot code: 1E000000 -> 1E088CC4 BSS: -> 1E0E7FD8 IRQ Stack: 0badc0de FIQ Stack: 0badc0de DRAM: et0: gmac_serdes_init read sdctl(0x43) et0: gmac_serdes_init() serdes_status0: 0x0; serdes_status1: 0xf00 et0: gmac_serdes_init write sdctl(0xf41400) et0: gmac_serdes_init read sdctl(0xf41400) et0: gmac_serdes_init write sdctl(0xf41403) et0: gmac_serdes_init read sdctl(0xf41403) et0: gmac_serdes_init write sdctl(0xf41400) et0: gmac_serdes_init read sdctl(0xf41400) et0: gmac_serdes_init write sdctl(0xf41404) et0: gmac_serdes_init read sdctl(0xf41404) et0: gmac_serdes_init write sdctl(0xf4140c) et0: gmac_serdes_init read sdctl(0xf4140c) et0: gmac_serdes_init write sdctl(0xf4141c) et0: gmac_serdes_init read sdctl(0xf4141c) et0: gmac_serdes_init read sdstat0(0xc100ff00); sdstat1(0xf00) BENCH SCREENING TEST1 ========================================= IPROC_XGPLL_CTRL_3: 0x15430000 IPROC_XGPLL_STATUS: 0x800000d7 DCO code: 13 ========================================= AVS: 0x0 DEV ID = 0xdc14 SKU ID = 0xb547 DDR type: DDR3 MEMC 0 DDR speed = 750MHz PHY revision version: 0x00044006 ddr_init2: Calling soc_ddr40_set_shmoo_dram_config ddr_init2: Calling soc_ddr40_phy_calibrate C01. Check Power Up Reset_Bar C02. Config and Release PLL from reset C03. Poll PLL Lock C04. Calibrate ZQ (ddr40_phy_calib_zq) C05. DDR PHY VTT On (Virtual VTT setup) DISABLE all Virtual VTT C06. DDR40_PHY_DDR3_MISC C07. VDL Calibration C07.1 C07.2 C07.4 C07.4.1 C07.4.4 VDL calibration result: 0x30000003 (cal_steps = 0) C07.4.5 C07.4.6 C07.5 C08. DDR40_PHY_DDR3_MISC : Start DDR40_PHY_RDLY_ODT.... C09. Start ddr40_phy_autoidle_on (MEM_SYS_PARAM_PHY_AUTO_IDLE) .... C10. Wait for Phy Ready...Done. DDR phy calibration passed Programming controller register ddr_init2: MemC initialization complete Validate Shmoo parameters stored in flash ..... OK Restoring Shmoo parameters from flash ..... done Running simple memory test ..... OK DeepSleep wakeup: ddr init bypassed 3 Enabling DDR ECC reporting clear_ddr: OK Enabling DDR ECC correction DDR Interface Ready Monitor len: 000E7FD8 Ram size: 80000000 Ram top: E0000000 TLB table from dfff0000 to dfff4000 Reserving 927k for U-Boot at: dff08000 Reserving 320k for malloc() at: dfeb8000 Reserving 80 Bytes for Board Info at: dfeb7fb0 Reserving 176 Bytes for Global Data at: dfeb7f00 RAM Configuration: Bank #0: 60000000 DRAM: New Stack Pointer is: dfeb5ee0 Relocation Offset is: c1f08000 Relocating to dff08000, new gd at dfeb7f00, sp at dfeb5ee0 Now running in RAM - U-Boot at: dff08000 SF: Detected MX25L6405D with page size 256 Bytes, erase size 64 KiB, total 8 MiB In: serial Out: serial Err: serial FLASH bank: 1 checkboard Board: EX3400-48T Base MAC: 407F5F8CBD5F arm_clk=1000MHz, axi_clk=500MHz, apb_clk=125MHz, arm_periph_clk=500MHz Net: Registering eth Broadcom BCM IPROC Ethernet driver 0.1 Using GMAC0 (0x18022000) et0: ethHw_chipAttach: Chip ID: 0xdc14; phyaddr: 0x1 et0: gmac_serdes_init read sdctl(0xf4141c) et0: gmac_serdes_init() serdes_status0: 0x100ff00; serdes_status1: 0xf00 et0: gmac_serdes_init() PLL ready brought up exit serdes_reset_core pbyaddr(0x1) id2(0xf) bcmiproc_eth-0 Last Reset Reason: 0 Hit ^C to stop autoboot: 1 0 SF: Detected MX25L6405D with page size 256 Bytes, erase size 64 KiB, total 8 MiB device 0 offset 0x3c0000, size 0x10000 SF: 65536 bytes @ 0x3c0000 Read: OK ## Checking Image at 61000000 ... Legacy image found Image Name: Juniper U-Boot Script File Image Type: ARM Unknown OS Script (uncompressed) Data Size: 1900 Bytes = 1.9 KiB Load Address: 00000000 Entry Point: 00000000 Contents: Image 0: 1892 Bytes = 1.8 KiB Verifying Checksum ... OK ## Executing script at 61000000 Setting bus to 0 SF: Detected MX25L6405D with page size 256 Bytes, erase size 64 KiB, total 8 MiB device 0 offset 0x140000, size 0x140000 SF: 1310720 bytes @ 0x140000 Read: OK 6113fffc: 5a6d1cc7 ..mZ crc32 for 61000000 ... 6113ffff ==> c71c6d5a Total of 1 word(s) were the same starting USB... USB0: phy ctrl 01d36440 Initial usb2h clock is: 000003fc Initial usb2h clock is: 000003fd iClk = 00000078, USBClk = 01536440 Bring usb2h_out of reset....... usb2_reset_state is set and now it is: 00000000 usb2_reset_state is: 00000000 USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found SF: Detected MX25L6405D with page size 256 Bytes, erase size 64 KiB, total 8 MiB, mapped at 00000088 ## Starting application at 0x00000074 ... Consoles: U-Boot console FreeBSD/armv6 U-Boot loader, Revision 1.2 (fbsd-builder@svl-bsdx-05.juniper.net, Fri Aug 26 11:13:00 PDT 2016) DRAM: 2048MB Number of U-Boot devices: 2 U-Boot env: loaderdev not set, will probe all devices. Found U-Boot device: disk Probing all disk devices... Checking unit=0 slice= partition=... good. |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|Autoboot in 3 seconds... (press Ctrl-C to interrupt) Autoboot in 2 seconds... (press Ctrl-C to interrupt) Autoboot in 1 seconds... (press Ctrl-C to interrupt) Booting from Junos volume ... /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\| /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|//packages/sets/active/boot/os-kernel/kernel text=0xd6c9fc -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-data=0x84000 \|/-syms=[0x4+0x6ab90\|/-+0x4+0x74d98\|/] -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-/packages/sets/active/boot/os-kernel/ex3400.dtb size=0x1fe0 \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-/packages/sets/active/boot/junos-modules/fips_core.ko text=0x13dc data=0x28f+0x5 syms=[0x4+0x730+0x4+0x4cd] loading required module 'netstack' \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/packages/sets/active/boot/netstack/netstack.ko text=0xa258fc /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\data=0x30a25+0x12570f |syms=[0x4+0xe2bb0/-\|/-\|+0x4+0xb715f/-\|/-] loading required module 'crypto' \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\/packages/sets/active/boot/os-crypto/crypto.ko text=0x2d8b0 |data=0xc12+0x2d2 /syms=[0x4+0x3950+0x4+0x2390] -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\/packages/sets/active/boot/junos-modules/hmac_drbg.ko text=0x2ad4 data=0x3cb+0x1239 syms=[0x4+0x1120+0x4+0xc0e] |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-/packages/sets/active/boot/junos-modules/random_dyce.ko text=0x2cb8 data=0x2ff+0x71 syms=[0x4+0xd60+0x4+0x8e5] \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-/packages/sets/active/boot/junos-modules/mac_sdk.ko text=0x1b60 data=0x693+0x15 syms=[0x4+0xab0+0x4+0x79a] \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-/packages/sets/active/boot/junos-modules/sdk_core.ko text=0xa448 data=0x641+0x12b syms=[0x4+0x1e30+0x4+0x165b] \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-/packages/sets/active/boot/junos-modules/junosprocfs.ko text=0xed0 data=0x387 syms=[0x4+0x930+0x4+0x6b0] \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/packages/sets/active/boot/junos-modules/mac_fips.ko text=0x6e8 data=0x6a1 syms=[0x4+0x5c0+0x4+0x48f] /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\/packages/sets/active/boot/junos-modules-ex/devrt.ko text=0x1fb24 |data=0xaad9+0x8383 /syms=[0x4+0x4800+0x4+0x3be4] -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|//packages/sets/active/boot/junos-modules-ex/poe.ko text=0x29bc data=0x42f+0x35 syms=[0x4+0x9d0+0x4+0x747] -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|//packages/sets/active/boot/junos-modules-ex/bmeb.ko text=0x1fe30 data=0x16e3+0x619 -syms=[0x4+0x38d0+0x4+0x2afb] loading required module 'dcp_re' \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-/packages/sets/active/boot/junos-net-platform/dcp_re.ko text=0x260ec \data=0x6f79+0xd6f |syms=[0x4+0x66d0+0x4+0x650f] loading required module 'pvi_db' /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|//packages/sets/active/boot/netstack/pvi_db.ko text=0x2cfc data=0x3b8+0x30 syms=[0x4+0x950+0x4+0x672] -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|//packages/sets/active/boot/junos-modules-ex/if_vcp.ko text=0x9570 data=0x3d3+0x15 syms=[0x4+0xee0+0x4+0xbe1] -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|//packages/sets/active/boot/junos-modules-ex/peertype_fxpc.ko text=0x1cc8 data=0x24c+0xc syms=[0x4+0x710+0x4+0x51a] -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\/packages/sets/active/boot/os-kernel/if_gmac.ko text=0xb93c data=0x60d+0xf syms=[0x4+0x1b90+0x4+0x14bd] loading required module 'miibus' |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-/packages/sets/active/boot/os-kernel/miibus.ko text=0x19e44 \data=0x105f+0x79 syms=[0x4+0x51e0+0x4+0x34e3] |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|//packages/sets/active/boot/os-kernel/contents.izo -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\size=0x89b600 |/-\|/-\|/-\|/-\Booting [/packages/sets/active/boot/os-kernel/kernel]... Using DTB from loaded file '/packages/sets/active/boot/os-kernel/ex3400.dtb'. SF: Detected MX25L6405D with page size 256 Bytes, erase size 64 KiB, total 8 MiB Kernel entry at 0xc1000180... Kernel args: (null) GDB: debug ports: uart GDB: current port: uart KDB: debugger backends: ddb gdb ndb KDB: current backend: ddb Copyright (c) 1992-2017 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD JNPR-11.0-20211117.c779bdc_builder_stable_11-204ab #0 r356482+c779bdcc411(stable/11-204ab): Tue Nov 16 21:18:12 PST 2021 builder@feyrith.juniper.net:/volume/build/junos/occam/llvm-5.0/sandbox-204ab-20211109/freebsd/stable_11-204ab/20211109.192316_builder_stable_11-204ab.c779bdc/obj/arm/juniper/kernels/JNPR-ARM-PRD/kernel arm Juniper clang version 5.0.2 (based on LLVM 5.0.2) module rtc already present! module wdog already present! module resetpfe already present! can't re-use a leaf (nssu_upgraded)! CPU: ARM Cortex-A9 r3p0 (ECO: 0x00000000) CPU Features: Multiprocessing, Thumb2, Security, VMSAv7, Coherent Walk Optional instructions: UMULL, SMULL, SIMD(ext) LoUU:2 LoC:2 LoUIS:2 Cache level 1: 32KB/32B 4-way data cache WB Read-Alloc Write-Alloc 32KB/32B 4-way instruction cache Read-Alloc real memory = 2147483648 (2048 MB) avail memory = 1996046336 (1903 MB) FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs random: entropy device external interface random: initialized Security policy loaded: JUNOS MAC/privcheck (mac_privcheck) Security policy loaded: MAC/grantbylabel (mac_grantbylabel) Security policy loaded: Junos MAC/SDK (mac_sdk) Security policy loaded: MAC/veriexec (mac_veriexec) Security policy loaded: Junos MAC/fips (mac_fips) MAC/veriexec fingerprint module loaded: SHA384 MAC/veriexec fingerprint module loaded: SHA1 MAC/veriexec fingerprint module loaded: SHA256 netisr_init: forcing maxthreads from 4 to 2 Initializing DCF platform properties .. Calling dcf_ng_hw_init for platform hw vecs initialization ofwbus0: simplebus0: on ofwbus0 mpcore0: on simplebus0 bcmidm0: mem 0x100000-0x1fffff on simplebus0 ihost_proc0: mem 0x1000000-0x1000fff on simplebus0 l2cache0: mem 0x1022000-0x1022fff irq 32 on mpcore0 l2cache0: Part number: 0x3, release: 0x8 (r3p2) l2cache0: Warning: L2 Cache should not already be active; trying to de-activate and re-initialize... l2cache0: L2 Cache enabled: 512KB/32B 16 ways gic0: mem 0x1021000-0x1021fff,0x1020100-0x10201ff on mpcore0 gic0: pn 0x390, arch 0x1, rev 0x2, implementer 0x43b irqs 256 mp_tmr0: mem 0x1020200-0x10202ff,0x1020600-0x102061f irq 27,29 on mpcore0 Timecounter "MPCore" frequency 500000005 Hz quality 800 Event timer "MPCore" frequency 500000005 Hz quality 1000 cpulist0: on ofwbus0 cpu0: on cpulist0 cpu0: missing 'reg' property cmic0: mem 0x48000000-0x4803ffff irq 194 on ofwbus0 cmic0: called :bcm_cmic_attach,Dev Chip Id is 0x1b547: cmicbus0: on cmic0 bcmdmu0: mem 0x3f000-0x3ffff on simplebus0 bcmmdio0: mem 0x32000-0x32fff irq 125 on simplebus0 bcmmdio0: MDIO bus running at freq: 2MHz bcm560xgmac0: mem 0x22000-0x22fff irq 234 on simplebus0 bcmidm0: chip dev id :0x1b547 sc :0xc68545e0 dev:0xc69eb280 miibus0: on bcm560xgmac0 brgphy0: PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto ehci0: mem 0x2a000-0x2bfff irq 117 on simplebus0 ehci0: called :bcmusb_ehci_attach,Dev Chip Id is 0x1b547: usbus0: EHCI version 1.0 usbus0 on ehci0 gpio0: mem 0x60-0x15f irq 125 on simplebus0 gpiobus0: on gpio0 gpioc0: on gpio0 uart0: <16750 or compatible> mem 0x300-0x3ff irq 123 on simplebus0 uart0: console (9600,n,8,1) uart0: [GIANT-LOCKED] uart1: <16750 or compatible> mem 0x400-0x4ff irq 123 on simplebus0 uart1: [GIANT-LOCKED] bcmrng0: mem 0x33000-0x33fff irq 133 on simplebus0 iichb0: mem 0x38000-0x38fff irq 127 on simplebus0 iicbus0: on iichb0 iic0: on iicbus0 cpld0: at addr 0x62 on iicbus0 cpldbus0: on cpld0 wdog0: on cpldbus0 oamctl0: on cpldbus0 fan0: on cpldbus0 fan1: on cpldbus0 resetctrl0: on cpldbus0 resetpfe0: on cpldbus0 resetphy0: on cpldbus0 iichb1: mem 0x3b000-0x3bfff irq 128 on simplebus0 iicbus1: on iichb1 iic1: on iicbus1 iicswitch0: at addr 0xe0 on iicbus1 poe0: on iicswitch0 poe reset failed rtc8564je_rtc0: on iicswitch0 rtc8564je_rtc0: registered as a time-of-day clock, resolution 1.000000s bcmcru0: mem 0x3e000-0x3efff on simplebus0 spi0: mem 0x27000-0x27fff irq 102 on simplebus0 spibus0: on spi0 mx25l0: at cs 0 mode 0 on spibus0 mx25l0: mx25ll64, sector 65536 bytes, 128 sectors cryptosoft0: Initializing product: 169 .. JUNOS procfs is initialized. Timecounters tick every 10.000 msec tcp_ip_smp_supp_chk_product: jnx_product_type: 169 support: 1 Registering tcp_platform_dependent = tcp_handle_special_ports md0: Preloaded image 9025024 bytes at 0xc2e50000 usbus0: 480Mbps High Speed USB v2.0 ugen0.1: at usbus0 uhub0: on usbus0 Release APs Trying to mount root from cd9660:/dev/md0.uzip []... uhub0: 2 ports with 2 removable, self powered ugen0.2: at usbus0 uhub1 on uhub0 uhub1: on usbus0 uhub1: 4 ports with 3 removable, self powered ugen0.3: at usbus0 umass0 on uhub1 umass0: on usbus0 umass0: SCSI over Bulk-Only; quirks = 0x8100 umass0:0:0: Attached to scbus0 da0 at umass-sim0 bus 0 scbus0 target 0 lun 0 da0: < USB DISK 2.0 PMAP> Removable Direct Access SPC-4 SCSI device da0: Serial Number 65003240D26C6F13 da0: 40.000MB/s transfers da0: 1910MB (3911680 512 byte sectors) da0: quirks=0x3 ** /dev/gpt/junos FILE SYSTEM CLEAN; SKIPPING CHECKS clean, 251109 free (125 frags, 31373 blocks, 0.0% fragmentation) @ 1677663320 [2023-03-01 09:35:20] preboot Initializing Verified Exec: Verified os-kernel-prd-arm-32-20211117 signed by PackageProductionECP256_2021 method ECDSA256+SHA256 Enforcing Verified Exec: Verified os-libs-11-arm-32-20211117 signed by PackageProductionECP256_2021 method ECDSA256+SHA256 Mounting os-libs-11-arm-32-20211117.c779bdc_builder_stable_11-204ab Verified os-runtime-arm-32-20211117 signed by PackageProductionECP256_2021 method ECDSA256+SHA256 Mounting os-runtime-arm-32-20211117.c779bdc_builder_stable_11-204ab @ 1677663330 [2023-03-01 09:35:30 UTC] verify active ... Verified jdocs-ex-arm-32-20220206 signed by PackageProductionECP256_2022 method ECDSA256+SHA256 Verified jail-runtime-arm-32-20211117 signed by PackageProductionECP256_2021 method ECDSA256+SHA256 Verified fips-mode-arm-32-20220206 signed by PackageProductionECP256_2022 method ECDSA256+SHA256 Verified jpfe-EX34XX-arm-32-20220206 signed by PackageProductionECP256_2022 method ECDSA256+SHA256 Verified jsdn-arm-32-20.6 signed by PackageProductionECP256_2022 method ECDSA256+SHA256 Verified jphone-home-arm-32-20220206 signed by PackageProductionECP256_2022 method ECDSA256+SHA256 Verified jsd-arm-32-20.6-jet-1 signed by PackageProductionECP256_2022 method ECDSA256+SHA256 Verified junos-dp-crypto-support-ex-arm-32-20220206 signed by PackageProductionECP256_2022 method ECDSA256+SHA256 Verified junos-libs-ex-arm-32-20220206 signed by PackageProductionECP256_2022 method ECDSA256+SHA256 Verified junos-daemons-arm-32-20220206 signed by PackageProductionECP256_2022 method ECDSA256+SHA256 Verified junos-libs-arm-32-20220206 signed by PackageProductionECP256_2022 method ECDSA256+SHA256 Verified junos-modules-ex-arm-32-20220206 signed by PackageProductionECP256_2022 method ECDSA256+SHA256 Verified junos-modules-arm-32-20220206 signed by PackageProductionECP256_2022 method ECDSA256+SHA256 Verified junos-openconfig-arm-32-20.6 signed by PackageProductionECP256_2022 method ECDSA256+SHA256 Verified junos-net-dcp-prd-arm-32-20220206 signed by PackageProductionECP256_2022 method ECDSA256+SHA256 Verified junos-probe-arm-32-20220206 signed by PackageProductionECP256_2022 method ECDSA256+SHA256 Verified junos-runtime-arm-32-20220206 signed by PackageProductionECP256_2022 method ECDSA256+SHA256 Verified junos-platform-ex-arm-32-20220206 signed by PackageProductionECP256_2022 method ECDSA256+SHA256 Verified junos-runtime-ex-arm-32-20220206 signed by PackageProductionECP256_2022 method ECDSA256+SHA256 Verified na-telemetry-arm-32-20.6 signed by PackageProductionECP256_2022 method ECDSA256+SHA256 Verified os-boot-junos-ve-arm-32-20211117 signed by PackageProductionECP256_2021 method ECDSA256+SHA256 Verified jweb-ex-arm-32-20220206 signed by PackageProductionECP256_2022 method ECDSA256+SHA256 Verified junos-net-prd-arm-32-20220206 signed by PackageProductionECP256_2022 method ECDSA256+SHA256 Verified os-kernel-prd-arm-32-20211117 signed by PackageProductionECP256_2021 method ECDSA256+SHA256 Verified os-libs-11-arm-32-20211117 signed by PackageProductionECP256_2021 method ECDSA256+SHA256 Verified os-crypto-arm-32-20211117 signed by PackageProductionECP256_2021 method ECDSA256+SHA256 Verified os-runtime-arm-32-20211117 signed by PackageProductionECP256_2021 method ECDSA256+SHA256 Verified py-base-arm-32-20220206 signed by PackageProductionECP256_2022 method ECDSA256+SHA256 Verified py-extensions2-arm-32-20220206 signed by PackageProductionECP256_2022 method ECDSA256+SHA256 Verified py-base2-arm-32-20220206 signed by PackageProductionECP256_2022 method ECDSA256+SHA256 Verified py-extensions-arm-32-20220206 signed by PackageProductionECP256_2022 method ECDSA256+SHA256 Verified os-zoneinfo-20211117 signed by PackageProductionECP256_2021 method ECDSA256+SHA256 @ 1677663333 [2023-03-01 09:35:33 UTC] verify done @ 1677663333 [2023-03-01 09:35:33 UTC] mount start @ 1677663334 [2023-03-01 09:35:34 UTC] junos 20.4R3-S2.6 Mounting os-zoneinfo-20211117.c779bdc_builder_stable_11-204ab Mounting py-extensions2-arm-32-20220206.163424_builder_junos_204_r3_s2 Mounting py-extensions-arm-32-20220206.163424_builder_junos_204_r3_s2 Mounting py-base2-arm-32-20220206.163424_builder_junos_204_r3_s2 Mounting py-base-arm-32-20220206.163424_builder_junos_204_r3_s2 Mounting os-crypto-arm-32-20211117.c779bdc_builder_stable_11-204ab Mounting junos-net-prd-arm-32-20220206.163424_builder_junos_204_r3_s2 Mounting junos-libs-arm-32-20220206.163424_builder_junos_204_r3_s2 Mounting junos-runtime-arm-32-20220206.163424_builder_junos_204_r3_s2 Starting watchdog daemon ... Mounting na-telemetry-arm-32-20.4R3-S2.6 Mounting jweb-ex-arm-32-20220206.163424_builder_junos_204_r3_s2 chown: nobody: illegal user name chown: nobody: illegal group name Mounting junos-runtime-ex-arm-32-20220206.163424_builder_junos_204_r3_s2 Mounting junos-probe-arm-32-20220206.163424_builder_junos_204_r3_s2 Mounting junos-platform-ex-arm-32-20220206.163424_builder_junos_204_r3_s2 Mounting junos-openconfig-arm-32-20.4R3-S2.6 Mounting junos-modules-arm-32-20220206.163424_builder_junos_204_r3_s2 Mounting junos-modules-ex-arm-32-20220206.163424_builder_junos_204_r3_s2 Mounting junos-libs-ex-arm-32-20220206.163424_builder_junos_204_r3_s2 Mounting junos-dp-crypto-support-ex-arm-32-20220206.163424_builder_junos_204_r3_s2 Mounting junos-daemons-arm-32-20220206.163424_builder_junos_204_r3_s2 Mounting jsdn-arm-32-20.4R3-S2.6 Mounting jsd-arm-32-20.4R3-S2.6-jet-1 Mounting jphone-home-arm-32-20220206.163424_builder_junos_204_r3_s2 mount_nullfs: /mfs/var: No such file or directory mount_nullfs: /mfs/var: No such file or directory Mounting jpfe-EX34XX-arm-32-20220206.163424_builder_junos_204_r3_s2 Mounting jdocs-ex-arm-32-20220206.163424_builder_junos_204_r3_s2 Mounting fips-mode-arm-32-20220206.163424_builder_junos_204_r3_s2 @ 1677663388 [2023-03-01 09:36:28 UTC] mount done random: unblocking device. Removing /etc/malloc.conf Checking platform support for: pvi:ex3400-48t ln: /var/db/scripts/import: No such file or directory @ 1677663395 [2023-03-01 09:36:35 UTC] mountlate start @ 1677663398 [2023-03-01 09:36:38 UTC] mountlate done kern.module_path: /packages/sets/active/boot/os-kernel/;/packages/sets/active/boot/os-crypto/;/packages/sets/active/boot/netstack/;/packages/sets/active/boot/junos-net-platform/;/packages/sets/active/boot/junos-modules-ex/;/packages/sets/active/boot/junos-modules/ -> /modules;/modules/ifpfe_drv;/modules/peertype;/modules/platform IPsec: Initialized Security Association Processing. fuse-freebsd: version 0.4.4, FUSE ABI 7.8 link_elf: symbol in_cksum undefined kldload: can't load nfsd.ko: No such file or directory can't re-use a leaf (hw_tok_log)! can't re-use a leaf (fxseries_simulation)! can't re-use a leaf (dcf_ng_hw_tokens)! Calling dcf_ng_hw_init for platform hw vecs initialization Loading the CHMIC module Loading the DC Platform NETPFE module ### /var/db/scripts is absent. Recreating it. ### bcmsdk_5_9_x kld Loading BCMSDK module..... Junosprocfs mounted on /junosproc. loader.name="FreeBSD/armv6 U-Boot loader" loader.version="1.2" FreeBSD/armv6 U-Boot loader 1.2 982+0 records in 982+0 records out 510640 bytes transferred in 0.034959 secs (14606674 bytes/sec) @ 1677663416 [2023-03-01 09:36:56 UTC] mgd start Creating initial configuration: ... mgd: error: Cannot open configuration file: /config/juniper.conf mgd: warning: activating factory configuration mgd: Running FIPS Self-tests veriexec: no fingerprint for file='/sbin/kats/cannot-exec' fsid=180 fileid=49356 gen=1 uid=0 pid=4893 mgd: FIPS Self-tests Passed Generating RSA2 key /etc/ssh/ssh_host_rsa_key Generated SSH key file /etc/ssh/ssh_host_rsa_key.pub with fingerprint SHA256:5N7+6YYoAAihXmW1+WHtTjBdLn1SpBaiVyazWkKXQjk Generating public/private rsa key pair. Your identification has been saved in /etc/ssh/ssh_host_rsa_key. Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub. The key fingerprint is: SHA256:5N7+6YYoAAihXmW1+WHtTjBdLn1SpBaiVyazWkKXQjk root@ The key's randomart image is: +---[RSA 2048]----+ |.. o...o.=.=.o | |o o +E=.@ + | |o. . o.BoB * . | |o o oo X o o | | . . So o | | . . .o | | . ...o | | . ... .. | | . .++ | +----[SHA256]-----+ Generating ECDSA key /etc/ssh/ssh_host_ecdsa_key Generated SSH key file /etc/ssh/ssh_host_ecdsa_key.pub with fingerprint SHA256:S21aEXBzK7VNSMZZoZwFfbtwdOHi8uQFybHWPiXTNzA Generating public/private ecdsa key pair. Your identification has been saved in /etc/ssh/ssh_host_ecdsa_key. Your public key has been saved in /etc/ssh/ssh_host_ecdsa_key.pub. The key fingerprint is: SHA256:S21aEXBzK7VNSMZZoZwFfbtwdOHi8uQFybHWPiXTNzA root@ The key's randomart image is: +---[ECDSA 256]---+ | ..+o*E=o.| | . B=OXoo| | o *B==*| | . oo.+=+| | S +. oo+.| | . = = ...| | o o | | | | | +----[SHA256]-----+ Generating ED25519 key /etc/ssh/ssh_host_ed25519_key Generated SSH key file /etc/ssh/ssh_host_ed25519_key.pub with fingerprint SHA256:Azwp/XWksypklThL5mevAuTlPGkrWNlP4vcFCe02PZw Generating public/private ed25519 key pair. Your identification has been saved in /etc/ssh/ssh_host_ed25519_key. Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub. The key fingerprint is: SHA256:Azwp/XWksypklThL5mevAuTlPGkrWNlP4vcFCe02PZw root@ The key's randomart image is: +--[ED25519 256]--+ | . | | o o o o | | . @ + = . | | .=.B + B . | | o *=.S B E | | =oOo.= o . | | o +.*. . . | | . . +.o. . | | . o... | +----[SHA256]-----+ mgd: commit complete @ 1677663564 [2023-03-01 09:39:24 UTC] mgd done Lock Manager RDM Embedded 7 [04-Aug-2006] http://www.birdstep.com Copyright (c) 1992-2006 Birdstep Technology, Inc. All Rights Reserved. Unix Domain sockets Lock manager Lock manager 'lockmgr' started successfully. Database Initialization Utility RDM Embedded 7 [04-Aug-2006] http://www.birdstep.com Copyright (c) 1992-2006 Birdstep Technology, Inc. All Rights Reserved. Profile database initialized Enhanced arp scale is disabled /etc/rc: WARNING: No dump device. Savecore not run. Prefetching /usr/sbin/rpd ... Prefetching /usr/sbin/lacpd ... Prefetching /usr/sbin/chassisd ... @ 1677663570 [2023-03-01 09:39:30 UTC] mountlater start @ 1677663574 [2023-03-01 09:39:34 UTC] mountlater done Starting jlaunchhelperd. sysctl: unknown oid 'kern.rtc_retries' Starting cron. cron: cron already running, pid: 6320 /etc/rc: WARNING: failed to start cron Wed Mar 1 09:39:48 UTC 2023 FreeBSD/arm (Amnesiac) (ttyu0) login: root --- JUNOS 20.4R3-S2.6 Kernel 32-bit JNPR-11.0-20211117.c779bdc_buil root@:RE:0% root@:RE:0% cli {master:0} root> configure Entering configuration mode {master:0}[edit] root# delete chassis auto-image-upgrade warning: statement not found {master:0}[edit] root# Broadcast Message from root@ (no tty) at 9:41 UTC... ALERT:Auto image Upgrade will start. This can terminate config CLI sess ion(s). Modified configuration will be lost. To stop Auto-image, in CLI do the following: 'edit; delete chassis auto-image-upgrade; commit'. set system root-authentication plain-text-password error: remote side unexpectedly closed connection root@:RE:0% cli {master:0} root> configure Auto Image Upgrade: DHCP INET Client State Reset : irb.0 vme.0 Auto Image Upgrade: DHCP INET6 Client State Reset : Entering configuration mode {master:0}[edit] root# FreeBSD/arm (Amnesiac) (ttyu0) login: root Last login: Wed Mar 1 09:40:40 on ttyu0 --- JUNOS 20.4R3-S2.6 Kernel 32-bit JNPR-11.0-20211117.c779bdc_buil root@:RE:0% cli {master:0} root> configure Entering configuration mode {master:0}[edit] root# set system root-authentication plain-text-password Auto Image Upgrade: DHCP INET Client Bound interfaces : Auto Image Upgrade: DHCP INET Client Unbound interfaces : irb.0 vme.0 Auto Image Upgrade: DHCP INET6 Client Bound interfaces : Auto Image Upgrade: DHCP INET6 Client Unbound interfaces : irb.0 vme.0 Auto Image Upgrade: To stop, on CLI apply "delete chassis auto-image-upgrade" and commit Auto Image Upgrade: No client in bound state, triggered phone-home ZTP delete chassis auto-image-upgrade {master:0}[edit] root# set system root-authentication plain-text-password New password: Retype new password: Auto Image Upgrade: Phone-home ZTP failed, reset all enabled DHCP clients Auto Image Upgrade: DHCP INET Client State Reset : irb.0 vme.0 Auto Image Upgrade: DHCP INET6 Client State Reset : irb.0 vme.0 {master:0}[edit] root# commit Auto Image Upgrade: DHCP INET Client Bound interfaces : Auto Image Upgrade: DHCP INET Client Unbound interfaces : irb.0 vme.0 Auto Image Upgrade: DHCP INET6 Client Bound interfaces : Auto Image Upgrade: DHCP INET6 Client Unbound interfaces : irb.0 vme.0 Auto Image Upgrade: To stop, on CLI apply "delete chassis auto-image-upgrade" and commit Auto Image Upgrade: No client in bound state, triggered phone-home ZTP configuration check succeeds commit complete {master:0}[edit] root# {master:0}[edit] root# {master:0}[edit] root# set interfaces irb unit 0 family inetroot# set interfaces irb unit 0 family inet address 192.168.1.9724 ^ invalid value '9724' in ip address: '192.168.1.9724' at '192.168.1.9724' {master:0}[edit] root# root# set interfaces irb unit 0 family inet address 192.168.1.9724 /24~24 error: missing or invalid prefix length '~24' in address '192.168.1.97/~24': 192.168.1.97/~24 {master:0}[edit] root# root# set interfaces irb unit 0 family inet address 192.168.1.97/~24 24 {master:0}[edit] root# set system host-name ex3400 {master:0}[edit] root# commit [edit interfaces irb unit 0 family inet] 'dhcp' Incompatible with interface assigned with address error: commit failed: (statements constraint check failed) {master:0}[edit] root# root# commit root# set system host-name ex3400 delete interfaces irb {master:0}[edit] root# root# delete interfaces irb root# commit root# set system host-name ex3400 root# set interfaces irb unit 0 family inet address 192.168.1.97/24 {master:0}[edit] root# commit configuration check succeeds commit complete {master:0}[edit] root@ex3400# {master:0}[edit] root@ex3400# p exit Exiting configuration mode {master:0} root@ex3400> ping 192.168.1.97 PING 192.168.1.97 (192.168.1.97): 56 data bytes 64 bytes from 192.168.1.97: icmp_seq=0 ttl=64 time=0.185 ms 64 bytes from 192.168.1.97: icmp_seq=1 ttl=64 time=0.165 ms 64 bytes from 192.168.1.97: icmp_seq=2 ttl=64 time=0.157 ms ^C --- 192.168.1.97 ping statistics --- 3 packets transmitted, 3 packets received, 0% packet loss round-trip min/avg/max/stddev = 0.157/0.169/0.185/0.012 ms {master:0} root@ex3400> root@ex3400> ping 192.168.1.97 254 PING 192.168.1.254 (192.168.1.254): 56 data bytes ^C --- 192.168.1.254 ping statistics --- 148 packets transmitted, 0 packets received, 100% packet loss {master:0} root@ex3400> show interfaces terse Interface Admin Link Proto Local Remote ge-0/0/0 up up ge-0/0/0.0 up up eth-switch pfe-0/0/0 up up pfe-0/0/0.16383 up up inet inet6 pfh-0/0/0 up up pfh-0/0/0.16383 up up inet pfh-0/0/0.16384 up up inet ge-0/0/1 up down ge-0/0/1.0 up down eth-switch ge-0/0/2 up down ge-0/0/2.0 up down eth-switch ge-0/0/3 up down ge-0/0/3.0 up down eth-switch ge-0/0/4 up down ge-0/0/4.0 up down eth-switch ge-0/0/5 up down ge-0/0/5.0 up down eth-switch ge-0/0/6 up down ge-0/0/6.0 up down eth-switch ge-0/0/7 up down ge-0/0/7.0 up down eth-switch ---(more)--- ge-0/0/8 up down ge-0/0/8.0 up down eth-switch ge-0/0/9 up down ge-0/0/9.0 up down eth-switch ge-0/0/10 up down ge-0/0/10.0 up down eth-switch ge-0/0/11 up down ge-0/0/11.0 up down eth-switch ge-0/0/12 up down ge-0/0/12.0 up down eth-switch ge-0/0/13 up down ge-0/0/13.0 up down eth-switch ge-0/0/14 up down ge-0/0/14.0 up down eth-switch ge-0/0/15 up down ge-0/0/15.0 up down eth-switch ge-0/0/16 up down ge-0/0/16.0 up down eth-switch ge-0/0/17 up down ge-0/0/17.0 up down eth-switch ge-0/0/18 up down ge-0/0/18.0 up down eth-switch ge-0/0/19 up down ---(more 35%)--- ge-0/0/19.0 up down eth-switch ge-0/0/20 up down ge-0/0/20.0 up down eth-switch ge-0/0/21 up down ge-0/0/21.0 up down eth-switch ge-0/0/22 up down ge-0/0/22.0 up down eth-switch ge-0/0/23 up down ge-0/0/23.0 up down eth-switch ge-0/0/24 up down ge-0/0/24.0 up down eth-switch ge-0/0/25 up down ge-0/0/25.0 up down eth-switch ge-0/0/26 up down ge-0/0/26.0 up down eth-switch ge-0/0/27 up down ge-0/0/27.0 up down eth-switch ge-0/0/28 up down ge-0/0/28.0 up down eth-switch ge-0/0/29 up down ge-0/0/29.0 up down eth-switch ge-0/0/30 up down ge-0/0/30.0 up down eth-switch ---(more 52%)--- ge-0/0/31 up down ge-0/0/31.0 up down eth-switch ge-0/0/32 up down ge-0/0/32.0 up down eth-switch ge-0/0/33 up down ge-0/0/33.0 up down eth-switch ge-0/0/34 up down ge-0/0/34.0 up down eth-switch ge-0/0/35 up down ge-0/0/35.0 up down eth-switch ge-0/0/36 up down ge-0/0/36.0 up down eth-switch ge-0/0/37 up down ge-0/0/37.0 up down eth-switch ge-0/0/38 up down ge-0/0/38.0 up down eth-switch ge-0/0/39 up down ge-0/0/39.0 up down eth-switch ge-0/0/40 up down ge-0/0/40.0 up down eth-switch ge-0/0/41 up down ge-0/0/41.0 up down eth-switch ge-0/0/42 up down ---(more 70%)--- ge-0/0/42.0 up down eth-switch ge-0/0/43 up down ge-0/0/43.0 up down eth-switch ge-0/0/44 up down ge-0/0/44.0 up down eth-switch ge-0/0/45 up down ge-0/0/45.0 up down eth-switch ge-0/0/46 up down ge-0/0/46.0 up down eth-switch ge-0/0/47 up down ge-0/0/47.0 up down eth-switch bme0 up up bme0.0 up up inet 128.0.0.1/2 128.0.0.4/2 128.0.0.16/2 128.0.0.63/2 cbp0 up up dsc up up esi up up gre up up ipip up up irb up up irb.0 up up inet 192.168.1.97/24 ---(more 87%)--- jsrv up up jsrv.1 up up inet 128.0.0.127/2 lo0 up up lo0.16385 up up inet lsi up up me0 up up me0.0 up up eth-switch mtun up up pimd up up pime up up pip0 up up tap up up vme up up vme.0 up up inet inet6 fe80::427f:5fff:fe8c:bd60/64 vtep up up {master:0} root@ex3400> {master:0} root@ex3400> show ethernet-switching table MAC flags (S - static MAC, D - dynamic MAC, L - locally learned, P - Persistent static, C - Control MAC SE - statistics enabled, NM - non configured MAC, R - remote PE MAC, O - ovsdb MAC) Ethernet switching table : 2 entries, 2 learned Routing instance : default-switch Vlan MAC MAC Age Logical NH RTR name address flags interface Index ID default 40:7f:5f:8c:bd:60 D - ge-0/0/0.0 0 0 default 5c:6a:80:f6:89:93 D - ge-0/0/0.0 0 0 {master:0} root@ex3400> {master:0} root@ex3400> show arp {master:0} root@ex3400> {master:0} root@ex3400> show configuration services {master:0} root@ex3400> {master:0} root@ex3400> show con ^ 'con' is ambiguous. Possible completions: configuration Show current configuration connections Show circuit cross-connect connections {master:0} root@ex3400> show con figuration interfaces irb unit 0 { family inet { address 192.168.1.97/24; } } {master:0} root@ex3400> {master:0} root@ex3400> show configuration interfaces vme unit 0 { family inet { dhcp { vendor-id Juniper-ex3400-48t-NX3623071089; } } family inet6 { dhcpv6-client { client-type stateful; client-ia-type ia-na; client-identifier duid-type duid-ll; vendor-id Juniper:ex3400-48t:NX3623071089; } } } {master:0} root@ex3400> {master:0} root@ex3400> show version | match we web JUNOS Web Management Platform Package [20220206.163424_builder_junos_204_r3_s2] {master:0} root@ex3400> {master:0} root@ex3400>