U-Boot 1.1.6 (Feb 6 2008 - 11:27:42) Board: EX3200-24T 2.7 EPLD: Version 6.0 (0x85) DRAM: Initializing (512 MB) FLASH: 8 MB USB: scanning bus for devices... 2 USB Device(s) found scanning bus for storage devices... 1 Storage Device(s) found Consoles: U-Boot console Found compatible API, ver. 7 FreeBSD/PowerPC U-Boot bootstrap loader, Revision 2.1 (marcelm@apg-bbuild01.juniper.net, Wed Feb 6 11:23:55 PST 2008) Memory: 512MB Loading /boot/defaults/loader.conf /kernel data=0x9ef8d0+0x6ed84 syms=[0x4+0x88ad0+0x4+0x8f1e6] Hit [Enter] to boot immediately, or space bar for command prompt. Booting [/kernel] in 1 second... Type '?' for a list of commands, 'help' for more detailed help. loader> boot -s Kernel entry at 0xa0000100 ... GDB: no debug ports present KDB: debugger backends: ddb KDB: current backend: ddb Copyright (c) 1996-2008, Juniper Networks, Inc. All rights reserved. Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. JUNOS 9.2R2.15 #0: 2008-10-03 19:20:25 UTC builder@amalath.juniper.net:/volume/build/junos/9.2/release/9.2R2.15/obj-powerpc/sys/compile/JUNIPER-EX WARNING: debug.mpsafenet forced to 0 as ipsec requires Giant Timecounter "decrementer" frequency 37500000 Hz quality 0 cpu0: Freescale e500v2 core revision 2.2 cpu0: HID0 80004080 real memory = 512753664 (489 MB) avail memory = 501309440 (478 MB) ETHERNET SOCKET BRIDGE initialising nexus0: ocpbus0: on nexus0 openpic0: iomem 0xfef40000-0xfef600b3 on ocpbus0 uart0: <16550 or compatible> iomem 0xfef04500-0xfef0450f irq 58 on ocpbus0 uart0: console (9600,n,8,1) uart1: <16550 or compatible> iomem 0xfef04600-0xfef0460f irq 58 on ocpbus0 lbc0: iomem 0xfef05000-0xfef05fff,0xff000000-0xffffffff irq 22 on ocpbus0 cfi0: iomem 0xff800000-0xffffffff on lbc0 syspld0 iomem 0xff000000-0xff00ffff on lbc0 tsec0: iomem 0xfef24000-0xfef24fff irq 45,46,50 on ocpbus0 tsec0: hardware MAC address 00:1f:12:34:e3:3f miibus0: on tsec0 e1000phy0: on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto pcib0: iomem 0xfef08000-0xfef08fff,0xf0000000-0xf3ffffff on ocpbus0 pci0: on pcib0 pci0: at device 18.0 (no driver attached) ehci0: mem 0xf0001000-0xf00010ff irq 22 at device 18.2 on pci0 usb0: EHCI version 1.0 usb0: on ehci0 usb0: USB revision 2.0 uhub0: Philips EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered umass0: STMicroelectronics ST72682 High Speed Mode, rev 2.00/2.10, addr 2 pcib1: iomem 0xfef0a000-0xfef0afff,0xe0000000-0xe3ffffff,0xec000000-0xec0fffff on ocpbus0 pci1: on pcib1 pcib2: at device 0.0 on pci1 pci2: on pcib2 mpfe0: mem 0xa4000000-0xa40fffff,0xa0000000-0xa3ffffff irq 18 at device 0.0 on pci2 i2c0: iomem 0xfef03000-0xfef03014 irq 59 on ocpbus0 i2c1: iomem 0xfef03100-0xfef03114 irq 59 on ocpbus0 idma0: iomem 0xfef21000-0xfef21300 irq 36 on ocpbus0 bme0:Virtual BME driver initializing Timecounters tick every 1.000 msec Loading common multilink module. IPsec: Initialized Security Association Processing. da0 at umass-sim0 bus 0 target 0 lun 0 da0: Removable Direct Access SCSI-2 device da0: 40.000MB/s transfers da0: 1000MB (2048000 512 byte sectors: 64H 32S/T 1000C) if_pfe_open: listener socket opened, listening on ... Trying to mount root from ufs:/dev/da0s2a Attaching /packages/jbase via /dev/mdctl... Mounted jbase package on /dev/md0... System watchdog timer disabled Enter full pathname of shell or 'recovery' for root password recovery or RETURN for /bin/sh: NOTE: to go to multi-user operation, exit the single-user shell (with ^D) # fsck -y ** /dev/da0s2a ** Last Mounted on / ** Root file system ** Phase 1 - Check Blocks and Sizes ** Phase 2 - Check Pathnames ** Phase 3 - Check Connectivity ** Phase 4 - Check Reference Counts ** Phase 5 - Check Cyl groups 1249 files, 42365 used, 51897 free (33 frags, 6483 blocks, 0.0% fragmentation) ** /dev/da0s3e ** Last Mounted on /config ** Phase 1 - Check Blocks and Sizes ** Phase 2 - Check Pathnames ** Phase 3 - Check Connectivity ** Phase 4 - Check Reference Counts ** Phase 5 - Check Cyl groups 32 files, 32 used, 28295 free (31 frags, 3533 blocks, 0.1% fragmentation) ** /dev/da0s2f ** Last Mounted on /var ** Phase 1 - Check Blocks and Sizes ** Phase 2 - Check Pathnames ** Phase 3 - Check Connectivity ** Phase 4 - Check Reference Counts ** Phase 5 - Check Cyl groups 269 files, 678 used, 62122 free (106 frags, 7752 blocks, 0.2% fragmentation) ** /dev/da0s3d ** Last Mounted on /var/tmp ** Phase 1 - Check Blocks and Sizes ** Phase 2 - Check Pathnames ** Phase 3 - Check Connectivity ** Phase 4 - Check Reference Counts ** Phase 5 - Check Cyl groups 2 files, 2 used, 160996 free (28 frags, 20121 blocks, 0.0% fragmentation) # mount -a # rm /config/juniper* # exit Mounted jcrypto-ex package on /dev/md3... Mounted jdocs-ex package on /dev/md4... Mounted jkernel-ex package on /dev/md5... Mounted jpfe-ex42x package on /dev/md6... Mounted jroute-ex package on /dev/md7... Mounted jswitch-ex package on /dev/md8... Mounted jweb-ex package on /dev/md9... Executing /packages/mnt/jweb-ex-9.2R2.15/mount.post.. savecore: /dev/da0s3d: Operation not permitted savecore: could not be determined No dump exists Skipping disk checks ... mount: /dev/da0s2f: Operation not permitted /var file system mount failed, startup aborted NWARNING: system watchdog timer still running, use '/sbin/watchdog -off' to disable Enter full pathname of shell or 'recovery' for root password recovery or RETURN for /bin/sh: