SYSLINUX 6.01 2013-07-04 Copyright (C) 1994-2013 H. Peter Anvin et al e%@)0(B[0;37;40m[?25l[2J[1;11H[0;30;44mlqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk[2;11H[0;30;44mx[0;1;36;44m Select kernel options and boot kernel [0;30;44mx[3;11H[0;30;44mtqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqu[4;11H[0;30;44mx[0;7;37;40m Serial console [0;30;44mx[5;11H[0;30;44mx[0;37;44m [0;30;44mx[6;11H[0;30;44mx[0;37;44m [0;30;44mx[7;11H[0;30;44mx[0;37;44m [0;30;44mx[8;11H[0;30;44mx[0;37;44m [0;30;44mx[9;11H[0;30;44mx[0;37;44m [0;30;44mx[10;11H[0;30;44mx[0;37;44m [0;30;44mx[11;11H[0;30;44mx[0;37;44m [0;30;44mx[12;11H[0;30;44mx[0;37;44m [0;30;44mx[13;11H[0;30;44mx[0;37;44m [0;30;44mx[14;11H[0;30;44mx[0;37;44m [0;30;44mx[15;11H[0;30;44mx[0;37;44m [0;30;44mx[16;11H[0;30;44mmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj[0;31;40m[18;13HPress [Tab] to edit, [Return] to select, [F1] for help[0;37;40m[28;1H[0;37;40m[22;1Hconsole=tty0 console=ttyS0 root=/dev/sda2 altroot=/dev/vda2 isolcpus=2[K[23;1H[K[K[24;1H[K[25;1H[K[26;1H[K[27;1H[K[28;1H[K[29;1H[20;25H[0;37;40mAutomatic boot in [0;1;37;40m0[0;37;40m seconds...[1;11H[0;30;44mlqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk[2;11H[0;30;44mx[0;1;36;44m Select kernel options and boot kernel [0;30;44mx[3;11H[0;30;44mtqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqu[4;11H[0;30;44mx[0;7;37;40m Serial console [0;30;44mx[5;11H[0;30;44mx[0;37;44m [0;30;44mx[6;11H[0;30;44mx[0;37;44m [0;30;44mx[7;11H[0;30;44mx[0;37;44m [0;30;44mx[8;11H[0;30;44mx[0;37;44m [0;30;44mx[9;11H[0;30;44mx[0;37;44m [0;30;44mx[10;11H[0;30;44mx[0;37;44m [0;30;44mx[11;11H[0;30;44mx[0;37;44m [0;30;44mx[12;11H[0;30;44mx[0;37;44m [0;30;44mx[13;11H[0;30;44mx[0;37;44m [0;30;44mx[14;11H[0;30;44mx[0;37;44m [0;30;44mx[15;11H[0;30;44mx[0;37;44m [0;30;44mx[16;11H[0;30;44mmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj[0;31;40m[18;13HPress [Tab] to edit, [Return] to select, [F1] for help[0;37;40m[28;1H[?25h[?25h[28;1H[0mLoading vmlinuz... ok Loading initrd...ok Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Initializing cgroup subsys cpuacct Linux version 3.10.55-ltsi-rt55-WR6.0.0.13_preempt-rt (builder@watatsumi.juniper.net) (gcc version 4.8.1 (Wind River Linux Sourcery CodeBench 4.8-39) ) #1 SMP PREEMPT RT Wed Sep 13 15:06:24 PDT 2017 Command line: BOOT_IMAGE=vmlinuz rootwait max_loop=255 rw clock=pit console=tty0 console=ttyS0,115200 root=/dev/sda2 altroot=/dev/vda2 isolcpus=2 initrd=initrd e820: BIOS-provided physical RAM map: BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x00000000bffdefff] usable BIOS-e820: [mem 0x00000000bffdf000-0x00000000bfffffff] reserved BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved BIOS-e820: [mem 0x0000000100000000-0x000000043fffffff] usable NX (Execute Disable) protection: active SMBIOS 2.8 present. Hypervisor detected: KVM No AGP bridge found e820: last_pfn = 0x440000 max_arch_pfn = 0x400000000 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820: last_pfn = 0xbffdf max_arch_pfn = 0x400000000 found SMP MP-table at [mem 0x000f72b0-0x000f72bf] mapped at [ffff8800000f72b0] __next_free_mem_range: Usage of MAX_NUMNODES is depricated. Use NUMA_NO_NODE instead Scanning 1 areas for low memory corruption Using GB pages for direct mapping init_memory_mapping: [mem 0x00000000-0x000fffff] init_memory_mapping: [mem 0x43fe00000-0x43fffffff] init_memory_mapping: [mem 0x43c000000-0x43fdfffff] init_memory_mapping: [mem 0x400000000-0x43bffffff] init_memory_mapping: [mem 0x00100000-0xbffdefff] init_memory_mapping: [mem 0x100000000-0x3ffffffff] RAMDISK: [mem 0x7ff4b000-0x7fffffff] ACPI: RSDP 00000000000f7260 00014 (v00 BOCHS ) ACPI: RSDT 00000000bffe1570 00030 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) ACPI: FACP 00000000bffe1324 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) ACPI: DSDT 00000000bffdfd00 01624 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) ACPI: FACS 00000000bffdfcc0 00040 ACPI: APIC 00000000bffe1398 000B0 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) ACPI: SRAT 00000000bffe1448 00128 (v01 BOCHS BXPCSRAT 00000001 BXPC 00000001) SRAT: PXM 0 -> APIC 0x00 -> Node 0 SRAT: PXM 0 -> APIC 0x01 -> Node 0 SRAT: PXM 0 -> APIC 0x02 -> Node 0 SRAT: PXM 0 -> APIC 0x03 -> Node 0 SRAT: PXM 0 -> APIC 0x04 -> Node 0 SRAT: PXM 0 -> APIC 0x05 -> Node 0 SRAT: PXM 0 -> APIC 0x06 -> Node 0 SRAT: PXM 0 -> APIC 0x07 -> Node 0 SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff] SRAT: Node 0 PXM 0 [mem 0x100000000-0x43fffffff] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x00000000-0xbfffffff] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x43fffffff] -> [mem 0x00000000-0x43fffffff] Initmem setup node 0 [mem 0x00000000-0x43fffffff] NODE_DATA [mem 0x43fffa000-0x43fffdfff] kvm-clock: Using msrs 4b564d01 and 4b564d00 kvm-clock: cpu 0, msr 4:3fff9001, boot clock Zone ranges: DMA [mem 0x00001000-0x00ffffff] DMA32 [mem 0x01000000-0xffffffff] Normal [mem 0x100000000-0x43fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x00001000-0x0009efff] node 0: [mem 0x00100000-0xbffdefff] node 0: [mem 0x100000000-0x43fffffff] ACPI: PM-Timer IO Port: 0x608 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) Using ACPI (MADT) for SMP configuration information smpboot: Allowing 8 CPUs, 0 hotplug CPUs e820: [mem 0xc0000000-0xfeffbfff] available for PCI devices Booting paravirtualized kernel on KVM setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 PERCPU: Embedded 27 pages/cpu @ffff88043fc00000 s79168 r8192 d23232 u262144 kvm-clock: cpu 0, msr 4:3fff9001, primary cpu clock KVM setup async PF for cpu 0 kvm-stealtime: cpu 0, msr 43fc0bd80 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4128616 Policy zone: Normal Kernel command line: BOOT_IMAGE=vmlinuz rootwait max_loop=255 rw clock=pit console=tty0 console=ttyS0,115200 root=/dev/sda2 altroot=/dev/vda2 isolcpus=2 initrd=initrd Warning! clock= boot option is deprecated. Use clocksource=xyz PID hash table entries: 4096 (order: 3, 32768 bytes) xsave: enabled xstate_bv 0x7, cntxt size 0x340 Checking aperture... No AGP bridge found Memory: 16428392k/17825792k available (9038k kernel code, 1049100k absent, 348300k reserved, 6253k data, 1272k init) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 Preemptible hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. NR_IRQS:4352 nr_irqs:744 16 Console: colour VGA+ 80x25 console [tty0] enabled console [ttyS0] enabled allocated 268435456 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups tsc: Detected 2593.992 MHz processor Calibrating delay loop (skipped) preset value.. 5187.98 BogoMIPS (lpj=2593992) pid_max: default: 32768 minimum: 301 Security Framework initialized Dentry cache hash table entries: 2097152 (order: 13, 33554432 bytes) Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys debug Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls Initializing cgroup subsys blkio Initializing cgroup subsys hugetlb CPU: Physical Processor ID: 0 mce: CPU supports 10 MCE banks Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0 tlb_flushall_shift: 6 Freeing SMP alternatives: 32k freed ACPI: Core revision 20130328 ACPI: All ACPI Tables successfully acquired ftrace: allocating 31689 entries in 124 pages ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 smpboot: CPU0: Intel Core Processor (Haswell, no TSX) (fam: 06, model: 3c, stepping: 01) Performance Events: unsupported p6 CPU model 60 no PMU driver, software events only. smpboot: Booting Node 0, Processors #1 #2kvm-clock: cpu 1, msr 4:3fff9041, secondary cpu clock KVM setup async PF for cpu 1 kvm-stealtime: cpu 1, msr 43fc4bd80 #3kvm-clock: cpu 2, msr 4:3fff9081, secondary cpu clock KVM setup async PF for cpu 2 kvm-stealtime: cpu 2, msr 43fc8bd80 #4kvm-clock: cpu 3, msr 4:3fff90c1, secondary cpu clock KVM setup async PF for cpu 3 kvm-stealtime: cpu 3, msr 43fccbd80 #5kvm-clock: cpu 4, msr 4:3fff9101, secondary cpu clock KVM setup async PF for cpu 4 kvm-stealtime: cpu 4, msr 43fd0bd80 #6kvm-clock: cpu 5, msr 4:3fff9141, secondary cpu clock KVM setup async PF for cpu 5 kvm-stealtime: cpu 5, msr 43fd4bd80 #7 OK kvm-clock: cpu 6, msr 4:3fff9181, secondary cpu clock KVM setup async PF for cpu 6 kvm-stealtime: cpu 6, msr 43fd8bd80 kvm-clock: cpu 7, msr 4:3fff91c1, secondary cpu clock Brought up 8 CPUs KVM setup async PF for cpu 7 kvm-stealtime: cpu 7, msr 43fdcbd80 smpboot: Total of 8 processors activated (41503.87 BogoMIPS) devtmpfs: initialized xor: automatically using best checksumming function: avx : 28624.000 MB/sec pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 ACPI: bus type PCI registered PCI: Using configuration type 1 for base access bio: create slab at 0 raid6: sse2x1 9468 MB/s raid6: sse2x2 11812 MB/s raid6: sse2x4 13980 MB/s raid6: avx2x1 18097 MB/s raid6: avx2x2 20832 MB/s raid6: avx2x4 24199 MB/s raid6: using algorithm avx2x4 (24199 MB/s) raid6: using avx2x2 recovery algorithm ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: Interpreter enabled ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130328/hwxface-568) ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568) ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20130328/hwxface-568) ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [bus 00-ff] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08) ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) ACPI: PCI Interrupt Link [LNKS] (IRQs *9) ACPI: Enabled 2 GPEs in block 00 to 0F vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:00:02.0 SCSI subsystem initialized ACPI: bus type ATA registered ACPI: bus type USB registered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti PTP clock support registered Advanced Linux Sound Architecture Driver Initialized. PCI: Using ACPI for IRQ routing nfc: nfc_init: NFC Core ver 0.1 NET: Registered protocol family 39 Switching to clocksource kvm-clock pnp: PnP ACPI init ACPI: bus type PNP registered pnp: PnP ACPI: found 9 devices ACPI: bus type PNP unregistered NET: Registered protocol family 2 TCP established hash table entries: 131072 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 9, 3670016 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP: reno registered UDP hash table entries: 8192 (order: 8, 1048576 bytes) UDP-Lite hash table entries: 8192 (order: 8, 1048576 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. pci 0000:00:00.0: Limiting direct PCI/PCI transfers pci 0000:00:01.0: PIIX3: Enabling Passive Release pci 0000:00:01.0: Activating ISA DMA hang workarounds ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 724k freed PCI-DMA: Using software bounce buffering for IO (SWIOTLB) software IO TLB [mem 0xbbfdf000-0xbffdf000] (64MB) mapped at [ffff8800bbfdf000-ffff8800bffdefff] microcode: CPU0 sig=0x306c1, pf=0x1, revision=0x1 microcode: CPU1 sig=0x306c1, pf=0x1, revision=0x1 microcode: CPU2 sig=0x306c1, pf=0x1, revision=0x1 microcode: CPU3 sig=0x306c1, pf=0x1, revision=0x1 microcode: CPU4 sig=0x306c1, pf=0x1, revision=0x1 microcode: CPU5 sig=0x306c1, pf=0x1, revision=0x1 microcode: CPU6 sig=0x306c1, pf=0x1, revision=0x1 microcode: CPU7 sig=0x306c1, pf=0x1, revision=0x1 microcode: Microcode Update Driver: v2.00 , Peter Oruba Scanning for low memory corruption every 60 seconds HugeTLB registered 2 MB page size, pre-allocated 0 pages squashfs: version 4.0 (2009/01/31) Phillip Lougher NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered 9p: Installing v9fs 9p2000 file system support bio: create slab at 1 Btrfs loaded msgmni has been set to 32088 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button [PWRF] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 XENFS: not registering filesystem on non-xen platform Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled 00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:05: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Linux agpgart interface v0.103 [drm] Initialized drm 1.1.0 20060810 brd: module loaded loop: module loaded hv_vmbus: registering driver hv_storvsc scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc0a0 irq 14 ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc0a8 irq 15 pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI e100: Copyright(c) 1999-2006 Intel Corporation e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI e1000: Copyright (c) 1999-2006 Intel Corporation. e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k e1000e: Copyright(c) 1999 - 2013 Intel Corporation. ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.13.10-k ixgbe: Copyright (c) 1999-2013 Intel Corporation. ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI ixgb: Copyright (c) 1999-2008 Intel Corporation. VMware vmxnet3 virtual NIC driver - version 1.1.30.0-k-NAPI hv_vmbus: registering driver hv_netvsc ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:01.2: UHCI Host Controller uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c000 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected usbcore: registered new interface driver usb-storage usbcore: registered new interface driver usbserial usbcore: registered new interface driver usbserial_generic usbserial: USB Serial support registered for generic usbcore: registered new interface driver ftdi_sio usbserial: USB Serial support registered for FTDI USB Serial Device usbcore: registered new interface driver pl2303 usbserial: USB Serial support registered for pl2303 i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 usbcore: registered new interface driver wacom rtc_cmos 00:00: RTC can wake from S4 rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 rtc_cmos 00:00: alarms up to one day, y3k, 114 bytes nvram md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid10 personality registered for level 10 md: multipath personality registered for level -4 md: faulty personality registered for level -5 device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com cpuidle: using governor ladder hv_vmbus: registering driver hid_hyperv usbcore: registered new interface driver usbhid usbhid: USB HID core driver hv_utils: Registering HyperV Utility Driver hv_vmbus: registering driver hv_util hv_vmbus: registering driver hv_balloon u32 classifier Actions configured nf_conntrack version 0.5.0 (16384 buckets, 65536 max) TCP: cubic registered NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 9pnet: Installing 9P2000 support Key type dns_resolver registered registered taskstats version 1 rtc_cmos 00:00: setting system clock to 2018-03-25 17:10:55 UTC (1521997855) ALSA device list: No soundcards found. ata1.00: ATA-7: QEMU HARDDISK, 2.5+, max UDMA/100 ata1.00: 83886080 sectors, multi 16: LBA48 ata1.00: configured for MWDMA2 scsi 0:0:0:0: Direct-Access ATA QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 83886080 512-byte logical blocks: (42.9 GB/40.0 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 < sda5 sda6 sda7 > sd 0:0:0:0: [sda] Attached SCSI disk Freeing unused kernel memory: 1272k freed Write protecting the kernel read-only data: 14336k Freeing unused kernel memory: 1188k freed Freeing unused kernel memory: 448k freed usb 1-1: new full-speed USB device number 2 using uhci_hcd INIT: version 2.88 booting uvesafb: SeaBIOS Developers, SeaBIOS VBE Adapter, Rev. 1, OEM: SeaBIOS VBE(C) 2011, VBE v3.0 uvesafb: no monitor limits have been set, default refresh rate will be used uvesafb: VBE state buffer size cannot be determined (eax=0x14f, err=0) uvesafb: scrolling: redraw input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/input/input2 hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:01.2-1/input0 input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3 Console: switching to colour frame buffer device 80x30 uvesafb: framebuffer at 0xfc000000, mapped to 0xffffc90003000000, using 4096k, total 4096k fb0: VESA VGA frame buffer device Mounting local filesystems... Starting udev tsc: Refined TSC clocksource calibration: 2593.943 MHz udevd[165]: starting version 182 FDC 0 is a S82078B WARN: conflicting configurations in /etc/fstab and /etc/default/rcS regarding the writability of rootfs. Please fix one of them. Activating swap Starting Bootlog daemon: bootlogd. Initializing random number generator... udev-cache: read-only rootfs, skip generating udev-cache Populating volatile Filesystems. Checking for -/run/lock-. Creating directory -/run/lock-. Checking for -/var/volatile/log-. Creating directory -/var/volatile/log-. Checking for -/var/volatile/tmp-. Creating directory -/var/volatile/tmp-. Target already exists. Skipping. Checking for -/var/lock-. Creating link -/var/lock- pointing to -/run/lock-. Checking for -/var/log-. Creating link -/var/log- pointing to -/var/volatile/log-. Checking for -/var/run-. Creating link -/var/run- pointing to -/run-. Checking for -/var/tmp-. Creating link -/var/tmp- pointing to -/var/volatile/tmp-. Checking for -/tmp-. Creating link -/tmp- pointing to -/var/tmp-. Checking for -/var/lock/subsys-. Creating directory -/var/lock/subsys-. Checking for -/var/log/wtmp-. Creating file -/var/log/wtmp-. Checking for -/var/run/utmp-. Creating file -/var/run/utmp-. Checking for -/etc/resolv.conf-. Creating link -/etc/resolv.conf- pointing to -/var/run/resolv.conf-. Checking for -/var/run/resolv.conf-. Creating file -/var/run/resolv.conf-. Checking for -/var/run/sepermit-. Creating directory -/var/run/sepermit-. Checking for -/var/run/sshd-. Creating directory -/var/run/sshd-. net.ipv4.conf.default.rp_filter = 1 net.ipv4.conf.all.rp_filter = 1 System time was Sun Mar 25 17:10:57 UTC 2018. Setting the System Clock using the Hardware Clock as reference... System Clock set. System local time is now Sun Mar 25 17:10:58 UTC 2018. Starting atd: OK INIT: Entering runlevel: 3 Starting OpenBSD Secure Shell server: sshd generating ssh RSA key... generating ssh ECDSA key... generating ssh DSA key... done. Configuring network interfaces... ifup: ignoring unknown interface int Starting rpcbind daemon...done. System time was Sun Mar 25 17:11:04 UTC 2018. Setting the System Clock using the Hardware Clock as reference... System Clock set. System local time is now Sun Mar 25 17:11:05 UTC 2018. Starting ntpd: done Starting syslogd/klogd: done Starting internet superserver: xinetd. Starting crond: OK Stopping Bootlog daemon: bootlogd. c Wind River Linux 6.0.0.13 host-10-1-19-30 console host-10-1-19-30 login: sleep 1 sec Mount partition /etc on /dev/sda5 mount: /dev/sda5 is write-protected, mounting read-only UDF-fs: warning (device sda5): udf_fill_super: No partition found (1) mount: wrong fs type, bad option, bad superblock on /dev/sda5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so. Loading first time. Format /dev/sda5 mke2fs 1.42.8 (20-Jun-2013) Discarding device blocks: 1024/8192 done Filesystem label= OS type: Linux Block size=1024 (log=0) Fragment size=1024 (log=0) Stride=0 blocks, Stripe width=0 blocks 2048 inodes, 8192 blocks 409 blocks (4.99%) reserved for the super user First data block=1 Maximum filesystem blocks=8388608 1 block group 8192 blocks per group, 8192 fragments per group 2048 inodes per group Allocating group tables: 0/1 done Writing inode tables: 0/1 done Creating journal (1024 blocks): done Writing superblocks and filesystem accounting information: 0/1 done kjournald starting. Commit interval 5 seconds EXT3-fs (sda5): using internal journal EXT3-fs (sda5): mounted filesystem with ordered data mode Mount partition /var on /dev/sda6 umount: /var: not mounted mount: /dev/sda6 is write-protected, mounting read-only UDF-fs: warning (device sda6): udf_fill_super: No partition found (1) mount: wrong fs type, bad option, bad superblock on /dev/sda6, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so. Loading first time. Format /dev/sda6 mke2fs 1.42.8 (20-Jun-2013) Discarding device blocks: 4096/524288 done Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) Stride=0 blocks, Stripe width=0 blocks 131072 inodes, 524288 blocks 26214 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=536870912 16 block groups 32768 blocks per group, 32768 fragments per group 8192 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912 Allocating group tables: 0/16 done Writing inode tables: 0/16 done Creating journal (16384 blocks): done Writing superblocks and filesystem accounting information: 0/16 done kjournald starting. Commit interval 5 seconds EXT3-fs (sda6): using internal journal EXT3-fs (sda6): mounted filesystem with ordered data mode Setting up a firewall.... ip_tables: (C) 2000-2006 Netfilter Core Team /home/pfe/riot/phase2_launch.sh: line 231: /var/jnx/card/local/vm_type: No such file or directory /home/pfe/riot/phase2_launch.sh: line 234: /var/jnx/card/local/type: No such file or directory rcp: lost connection