loader> install --format file:///junos-srxsme-11.4R7.5-domestic.tgz /kernel data=0xae54b8+0x12cce0 syms=[0x4+0x88b30+0x4+0xc675c] Kernel entry at 0x801000d8 ... init regular console GDB: debug ports: uart GDB: current port: uart KDB: debugger backends: ddb gdb KDB: current backend: ddb Copyright (c) 1996-2013, Juniper Networks, Inc. All rights reserved. Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. JUNOS 11.4R7.5 #0: 2013-03-01 11:40:03 UTC builder@evenath.juniper.net:/volume/build/junos/11.4/release/11.4R7.5/obj-octeon/bsd/kernels/JSRXNLE/kernel JUNOS 11.4R7.5 #0: 2013-03-01 11:40:03 UTC builder@evenath.juniper.net:/volume/build/junos/11.4/release/11.4R7.5/obj-octeon/bsd/kernels/JSRXNLE/kernel real memory = 2147483648 (2048MB) avail memory = 1057017856 (1008MB) FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs Security policy loaded: JUNOS MAC/pcap (mac_pcap) Security policy loaded: JUNOS MAC/runasnonroot (mac_runasnonroot) cpu0 on motherboard : CAVIUM's OCTEON 56XX CPU Rev. 0.9 with no FPU implemented L1 Cache: I size 32kb(128 line), D size 8kb(128 line), sixty four way. L2 Cache: Size 2048kb, 8 way obio0 on motherboard uart0: on obio0 uart0: console (9600,n,8,1) twsi0 on obio0 dwc0: on obio0 usb0: on dwc0 usb0: USB revision 2.0 uhub0: vendor 0x0000 DWC OTG root hub, class 9/0, rev 2.00/1.00, addr 1 uhub0: 1 port with 1 removable, self powered uhub1: vendor 0x0409 product 0x005a, class 9/0, rev 2.00/1.00, addr 2 uhub1: single transaction translator uhub1: 4 ports with 4 removable, self powered umass0: Kingston DT 101 G2, rev 2.00/1.00, addr 3 pcib0: on obio0 Disabling Octeon big bar support PCIe: Waiting for port 0 to finish reset PCIe: Port 0 link active, 4 lanes PCIe: Waiting for port 1 to finish reset PCIe: Port 1 link active, 4 lanes pcib0: Initialized controller pci0: on pcib0 pcib2: irq 0 at device 0.0 on pci0 pci1: on pcib2 pcib3: irq 0 at device 1.0 on pci1 pci2: on pcib3 pci2: at device 0.0 (no driver attached) pcib4: irq 0 at device 2.0 on pci1 pci3: on pcib4 atapci0: mem 0x100000-0x10007f,0x104000-0x107fff irq 0 at device 0.0 on pci3 pcib0: Allocating IRQ for atapci failed atapci0: unable to map interrupt device_attach: atapci0 attach returned 6 pcib5: irq 0 at device 3.0 on pci1 pci4: on pcib5 pcib6: mem 0x200000-0x21ffff irq 0 at device 0.0 on pci4 pci5: on pcib6 pcib7: irq 0 at device 1.0 on pci5 pci6: on pcib7 pcib8: irq 0 at device 2.0 on pci5 pci7: on pcib8 pcib9: irq 0 at device 3.0 on pci5 pci8: on pcib9 pcib10: irq 0 at device 4.0 on pci5 pci9: on pcib10 pcib11: irq 0 at device 5.0 on pci5 pci10: on pcib11 pcib12: irq 0 at device 6.0 on pci5 pci11: on pcib12 pcib13: irq 0 at device 7.0 on pci5 pci12: on pcib13 pcib14: irq 0 at device 4.0 on pci1 pci13: on pcib14 pcib1: on obio0 pci14: on pcib1 pci14: at device 0.0 (no driver attached) CF error busy CF timeout busy CF error busy CompactFlash model ata0: on obio0 gblmem0 on obio0 octpkt0: on obio0 cfi0: on obio0 Timecounter "mips" frequency 700000000 Hz quality 0 md0: Preloaded image 9857024 bytes at 0x80e6142c da0 at umass-sim0 bus 0 target 0 lun 0 da0: Removable Direct Access SCSI-0 device da0: 40.000MB/s transfers da0: 3824MB (7831552 512 byte sectors: 255H 63S/T 487C) Trying to mount root from cd9660:/dev/md0 WARNING: preposterous time in file system WARNING: clock 9420 days greater than file system time tty: not found Installing disk0:/junos-srxsme-11.4R7.5-domestic.tgz Computing slice and partition sizes for /dev/da0 ... Attempting to save existing configuration... Could not find any existing configuration. Formatting target media /dev/da0 ... Preparing to create slices on /dev/da0 /dev/da0: 7831552 sectors [C:487 H:255 S:63 SS:512] Shrinking slice 1 by 1313 blocks for alignment Shrinking slice 2 by 1250 blocks for alignment Shrinking slice 3 by 8804 blocks for alignment Shrinking slice 4 by 7897 blocks for alignment 1+0 records in 1+0 records out 512 bytes transferred in 0.000321 secs (1594271 bytes/sec) Creating slices: g c487 h255 s63 p 1 0xA5 63 2538207 p 2 0xA5 2538270 2538270 p 3 0xA5 5076540 2506140 p 4 0xA5 7582680 240975 a 1 ******* Working on device /dev/da0 ******* fdisk: Failed to write sector zero bsdlabel: Geom not found ERROR: Execution failed for command bsdlabel Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `vnlru_mem' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...0 done syncing disks... All buffers synced. Uptime: 11s Resetting all PIMs Rebooting... cpu_reset: Stopping other CPUs U-Boot 1.1.6 (Build time: Oct 9 2009 - 11:16:01) SRX_650 board revision major:0, minor:9, serial #: AABR7380 OCTEON CN5650-SCP pass 2.1, Core clock: 700 MHz, DDR clock: 333 MHz (666 Mhz data rate) DRAM: 2048 MB Starting Memory POST... Checking datalines... OK Checking address lines... OK Checking 512K memory for U-Boot... OK. Running U-Boot CRC Test... OK. Flash: 8 MB USB: scanning bus for devices... 3 USB Device(s) found scanning bus for storage devices... 1 Storage Device(s) found Clearing DRAM........ done Fuse: 0x0fff, Coremask: 0x0fff BIST check passed. 0:00:00.0 Vendor/Device ID = 0x850910b5 0:01:01.0 Vendor/Device ID = 0x850910b5 0:02:00.0 Vendor/Device ID = 0xb68014e4 Net: octeth0, octeth1, octeth2, octeth3 ide 0: not available POST Passed Press SPACE to abort autoboot in 1 seconds ELF file is 32 bit Loading .text @ 0x8f000078 (241008 bytes) Loading .rodata @ 0x8f03ade8 (13908 bytes) Loading .rodata.str1.4 @ 0x8f03e43c (15972 bytes) Loading set_Xcommand_set @ 0x8f0422a0 (96 bytes) Loading .rodata.cst4 @ 0x8f042300 (20 bytes) Loading .data @ 0x8f043000 (5572 bytes) Loading .data.rel.ro @ 0x8f0445c4 (120 bytes) Loading .data.rel @ 0x8f04463c (136 bytes) Clearing .bss @ 0x8f0446c8 (8304 bytes) ## Starting application at 0x8f000078 ... Consoles: U-Boot console Found compatible API, ver. 1.5 FreeBSD/MIPS U-Boot bootstrap loader, Revision 1.5 (builder@ormonth.juniper.net, Fri Oct 9 10:55:15 UTC 2009) Memory: 2048MB [6]Booting from usb slice 1 Un-Protected 1 sectors writing to flash... Protected 1 sectors \ can't load '/kernel' can't load '/kernel.old' Press Enter to stop auto bootsequencing and to enter loader prompt.