GNU GRUB version 2.02~juniper/rel_v3~ /----------------------------------------------------------------------------\ | Juniper Linux | |*Juniper Linux Debug | | Juniper-Linux-Recovery | | | | | | | | | | | | | | | | | | | \----------------------------------------------------------------------------/ Use the ^ and v keys to select which entry is highlighted. Press enter to boot the selected OS, `e' to edit the commands before booting or `c' for a command-line. ESC to return previous menu. Loading Linux Debug ... error: no suitable video mode found. Booting in blind mode Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Initializing cgroup subsys cpuacct Linux version 3.10.55-ltsi-WR6.0.0.15_standard (ssd-builder@contrail-vsrx-build11) (gcc version 4.8.1 (Wind River Linux Sourcery CodeBench 4.8-39) ) #1 SMP PREEMPT Tue Sep 13 02:57:29 PDT 2016 Command line: BOOT_IMAGE=/bzImage-intel-x86-64.bin root=LABEL=ROOT console=ttyS0,9600n8 acpi=ht reset_devices libata.force=noncq acpi_enforce_resources=lax memmap=64M$2G hugepages=5999 isolcpus=1-e KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls e820: BIOS-provided physical RAM map: BIOS-e820: [mem 0x0000000000000000-0x0000000000084fff] usable BIOS-e820: [mem 0x0000000000085000-0x00000000000bffff] reserved BIOS-e820: [mem 0x0000000000100000-0x000000009eebefff] usable BIOS-e820: [mem 0x000000009eebf000-0x000000009f0befff] type 20 BIOS-e820: [mem 0x000000009f0bf000-0x000000009f6befff] reserved BIOS-e820: [mem 0x000000009f6bf000-0x000000009f7befff] ACPI NVS BIOS-e820: [mem 0x000000009f7bf000-0x000000009f7fefff] ACPI data BIOS-e820: [mem 0x000000009f7ff000-0x000000009f7fffff] usable BIOS-e820: [mem 0x000000009f800000-0x000000009fffffff] reserved BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved BIOS-e820: [mem 0x0000000100000000-0x000000045fffffff] usable Malformed early option 'acpi' NX (Execute Disable) protection: active e820: user-defined physical RAM map: user: [mem 0x0000000000000000-0x0000000000084fff] usable user: [mem 0x0000000000085000-0x00000000000bffff] reserved user: [mem 0x0000000000100000-0x000000007fffffff] usable user: [mem 0x0000000080000000-0x0000000083ffffff] reserved user: [mem 0x0000000084000000-0x000000009eebefff] usable user: [mem 0x000000009eebf000-0x000000009f0befff] type 20 user: [mem 0x000000009f0bf000-0x000000009f6befff] reserved user: [mem 0x000000009f6bf000-0x000000009f7befff] ACPI NVS user: [mem 0x000000009f7bf000-0x000000009f7fefff] ACPI data user: [mem 0x000000009f7ff000-0x000000009f7fffff] usable user: [mem 0x000000009f800000-0x000000009fffffff] reserved user: [mem 0x00000000e0000000-0x00000000efffffff] reserved user: [mem 0x00000000feb00000-0x00000000feb03fff] reserved user: [mem 0x00000000fec00000-0x00000000fec00fff] reserved user: [mem 0x00000000fed10000-0x00000000fed19fff] reserved user: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved user: [mem 0x00000000fee00000-0x00000000fee00fff] reserved user: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved user: [mem 0x0000000100000000-0x000000045fffffff] usable efi: EFI v2.31 by INSYDE Corp. efi: ACPI=0x9f7fe000 ACPI 2.0=0x9f7fe014 SMBIOS=0x9f6a6f98 efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB) efi: mem01: type=7, attr=0xf, range=[0x0000000000001000-0x000000000006f000) (0MB) efi: mem02: type=4, attr=0xf, range=[0x000000000006f000-0x0000000000070000) (0MB) efi: mem03: type=7, attr=0xf, range=[0x0000000000070000-0x0000000000085000) (0MB) efi: mem04: type=0, attr=0xf, range=[0x0000000000085000-0x0000000000088000) (0MB) efi: mem05: type=6, attr=0x800000000000000f, range=[0x0000000000088000-0x00000000000a0000) (0MB) efi: mem06: type=2, attr=0xf, range=[0x0000000000100000-0x0000000001544000) (20MB) efi: mem07: type=7, attr=0xf, range=[0x0000000001544000-0x0000000002000000) (10MB) efi: mem08: type=2, attr=0xf, range=[0x0000000002000000-0x0000000003444000) (20MB) efi: mem09: type=7, attr=0xf, range=[0x0000000003444000-0x0000000035595000) (801MB) efi: mem10: type=2, attr=0xf, range=[0x0000000035595000-0x0000000036ac2000) (21MB) efi: mem11: type=7, attr=0xf, range=[0x0000000036ac2000-0x000000005794b000) (526MB) efi: mem12: type=2, attr=0xf, range=[0x000000005794b000-0x000000007e5f0000) (620MB) efi: mem13: type=4, attr=0xf, range=[0x000000007e5f0000-0x000000007e610000) (0MB) efi: mem14: type=7, attr=0xf, range=[0x000000007e610000-0x0000000080770000) (33MB) efi: mem15: type=4, attr=0xf, range=[0x0000000080770000-0x00000000815e0000) (14MB) efi: mem16: type=7, attr=0xf, range=[0x00000000815e0000-0x000000008170d000) (1MB) efi: mem17: type=1, attr=0xf, range=[0x000000008170d000-0x00000000817ef000) (0MB) efi: mem18: type=7, attr=0xf, range=[0x00000000817ef000-0x0000000084072000) (40MB) efi: mem19: type=4, attr=0xf, range=[0x0000000084072000-0x000000008410b000) (0MB) efi: mem20: type=7, attr=0xf, range=[0x000000008410b000-0x0000000084120000) (0MB) efi: mem21: type=4, attr=0xf, range=[0x0000000084120000-0x0000000084135000) (0MB) efi: mem22: type=7, attr=0xf, range=[0x0000000084135000-0x0000000084160000) (0MB) efi: mem23: type=4, attr=0xf, range=[0x0000000084160000-0x0000000084175000) (0MB) efi: mem24: type=7, attr=0xf, range=[0x0000000084175000-0x0000000084176000) (0MB) efi: mem25: type=4, attr=0xf, range=[0x0000000084176000-0x00000000841ba000) (0MB) efi: mem26: type=7, attr=0xf, range=[0x00000000841ba000-0x00000000841ee000) (0MB) efi: mem27: type=4, attr=0xf, range=[0x00000000841ee000-0x0000000084204000) (0MB) efi: mem28: type=7, attr=0xf, range=[0x0000000084204000-0x000000008422d000) (0MB) efi: mem29: type=4, attr=0xf, range=[0x000000008422d000-0x00000000842dd000) (0MB) efi: mem30: type=7, attr=0xf, range=[0x00000000842dd000-0x00000000842f3000) (0MB) efi: mem31: type=4, attr=0xf, range=[0x00000000842f3000-0x000000008434d000) (0MB) efi: mem32: type=7, attr=0xf, range=[0x000000008434d000-0x0000000084372000) (0MB) efi: mem33: type=4, attr=0xf, range=[0x0000000084372000-0x0000000084374000) (0MB) efi: mem34: type=7, attr=0xf, range=[0x0000000084374000-0x000000008437a000) (0MB) efi: mem35: type=4, attr=0xf, range=[0x000000008437a000-0x0000000084446000) (0MB) efi: mem36: type=7, attr=0xf, range=[0x0000000084446000-0x000000008444e000) (0MB) efi: mem37: type=4, attr=0xf, range=[0x000000008444e000-0x000000008449e000) (0MB) efi: mem38: type=7, attr=0xf, range=[0x000000008449e000-0x00000000844a4000) (0MB) efi: mem39: type=4, attr=0xf, range=[0x00000000844a4000-0x00000000844af000) (0MB) efi: mem40: type=7, attr=0xf, range=[0x00000000844af000-0x00000000844b2000) (0MB) efi: mem41: type=4, attr=0xf, range=[0x00000000844b2000-0x00000000844f7000) (0MB) efi: mem42: type=7, attr=0xf, range=[0x00000000844f7000-0x00000000844f8000) (0MB) efi: mem43: type=4, attr=0xf, range=[0x00000000844f8000-0x0000000084ecc000) (9MB) efi: mem44: type=7, attr=0xf, range=[0x0000000084ecc000-0x0000000084ecd000) (0MB) efi: mem45: type=4, attr=0xf, range=[0x0000000084ecd000-0x0000000084efb000) (0MB) efi: mem46: type=7, attr=0xf, range=[0x0000000084efb000-0x0000000084efc000) (0MB) efi: mem47: type=4, attr=0xf, range=[0x0000000084efc000-0x0000000084efd000) (0MB) efi: mem48: type=7, attr=0xf, range=[0x0000000084efd000-0x0000000084f01000) (0MB) efi: mem49: type=4, attr=0xf, range=[0x0000000084f01000-0x0000000084f39000) (0MB) efi: mem50: type=7, attr=0xf, range=[0x0000000084f39000-0x0000000084f3a000) (0MB) efi: mem51: type=4, attr=0xf, range=[0x0000000084f3a000-0x0000000084f3c000) (0MB) efi: mem52: type=7, attr=0xf, range=[0x0000000084f3c000-0x0000000084f3d000) (0MB) efi: mem53: type=4, attr=0xf, range=[0x0000000084f3d000-0x00000000850bf000) (1MB) efi: mem54: type=7, attr=0xf, range=[0x00000000850bf000-0x00000000850c6000) (0MB) efi: mem55: type=4, attr=0xf, range=[0x00000000850c6000-0x00000000854c8000) (4MB) efi: mem56: type=7, attr=0xf, range=[0x00000000854c8000-0x00000000854c9000) (0MB) efi: mem57: type=4, attr=0xf, range=[0x00000000854c9000-0x00000000854d1000) (0MB) efi: mem58: type=7, attr=0xf, range=[0x00000000854d1000-0x00000000854d4000) (0MB) efi: mem59: type=4, attr=0xf, range=[0x00000000854d4000-0x00000000855d4000) (1MB) efi: mem60: type=7, attr=0xf, range=[0x00000000855d4000-0x00000000855df000) (0MB) efi: mem61: type=4, attr=0xf, range=[0x00000000855df000-0x00000000855e0000) (0MB) efi: mem62: type=7, attr=0xf, range=[0x00000000855e0000-0x00000000855e4000) (0MB) efi: mem63: type=4, attr=0xf, range=[0x00000000855e4000-0x00000000869ef000) (20MB) efi: mem64: type=7, attr=0xf, range=[0x00000000869ef000-0x000000009eb6c000) (385MB) efi: mem65: type=2, attr=0xf, range=[0x000000009eb6c000-0x000000009eb77000) (0MB) efi: mem66: type=3, attr=0xf, range=[0x000000009eb77000-0x000000009eebf000) (3MB) efi: mem67: type=5, attr=0x800000000000000f, range=[0x000000009eebf000-0x000000009f0bf000) (2MB) efi: mem68: type=6, attr=0x800000000000000f, range=[0x000000009f0bf000-0x000000009f2bf000) (2MB) efi: mem69: type=0, attr=0xf, range=[0x000000009f2bf000-0x000000009f6bf000) (4MB) efi: mem70: type=10, attr=0xf, range=[0x000000009f6bf000-0x000000009f7bf000) (1MB) efi: mem71: type=9, attr=0xf, range=[0x000000009f7bf000-0x000000009f7ff000) (0MB) efi: mem72: type=4, attr=0xf, range=[0x000000009f7ff000-0x000000009f800000) (0MB) efi: mem73: type=7, attr=0xf, range=[0x0000000100000000-0x0000000460000000) (13824MB) efi: mem74: type=0, attr=0x0, range=[0x00000000000a0000-0x00000000000c0000) (0MB) efi: mem75: type=0, attr=0x0, range=[0x000000009f800000-0x00000000a0000000) (8MB) efi: mem76: type=11, attr=0x8000000000000001, range=[0x00000000e0000000-0x00000000f0000000) (256MB) efi: mem77: type=11, attr=0x8000000000000001, range=[0x00000000feb00000-0x00000000feb04000) (0MB) efi: mem78: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB) efi: mem79: type=11, attr=0x8000000000000001, range=[0x00000000fed10000-0x00000000fed1a000) (0MB) efi: mem80: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB) efi: mem81: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB) efi: mem82: type=11, attr=0x8000000000000001, range=[0x00000000ffc00000-0x0000000100000000) (4MB) SMBIOS 2.8 present. No AGP bridge found e820: last_pfn = 0x460000 max_arch_pfn = 0x400000000 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820: last_pfn = 0x9f800 max_arch_pfn = 0x400000000 __next_free_mem_range: Usage of MAX_NUMNODES is depricated. Use NUMA_NO_NODE instead Scanning 1 areas for low memory corruption init_memory_mapping: [mem 0x00000000-0x000fffff] init_memory_mapping: [mem 0x45fe00000-0x45fffffff] init_memory_mapping: [mem 0x45c000000-0x45fdfffff] init_memory_mapping: [mem 0x400000000-0x45bffffff] init_memory_mapping: [mem 0x00100000-0x7fffffff] init_memory_mapping: [mem 0x84000000-0x9eebefff] init_memory_mapping: [mem 0x9f7ff000-0x9f7fffff] init_memory_mapping: [mem 0x100000000-0x3ffffffff] RAMDISK: [mem 0x35595000-0x36ac1fff] ACPI: RSDP 000000009f7fe014 00024 (v02 INSYDE) ACPI: XSDT 000000009f7fe120 000BC (v01 INSYDE STARGO 00000001 01000013) ACPI: FACP 000000009f7fa000 0010C (v05 INSYDE STARGO 00000001 ACPI 00040000) ACPI: DSDT 000000009f7f1000 05ACE (v02 INSYDE STARGO 00000000 ACPI 00040000) ACPI: FACS 000000009f7ab000 00040 ACPI: TCPA 000000009f7fd000 00032 (v02 INSYDE STARGO 00000000 ACPI 00040000) ACPI: UEFI 000000009f7fb000 01036 (v01 INSYDE STARGO 00000001 ACPI 00040000) ACPI: HPET 000000009f7f9000 00038 (v01 INSYDE STARGO 00000001 ACPI 00040000) ACPI: APIC 000000009f7f8000 00092 (v03 INSYDE STARGO 00000001 ACPI 00040000) ACPI: MCFG 000000009f7f7000 0003C (v01 INSYDE STARGO 00000001 ACPI 00040000) ACPI: SLIC 000000009f7f0000 00176 (v01 INSYDE STARGO 00000001 ACPI 00040000) ACPI: WDAT 000000009f7ef000 00224 (v01 INSYDE STARGO 00000001 ACPI 00040000) ACPI: BOOT 000000009f7ed000 00028 (v01 INSYDE STARGO 00000001 ACPI 00040000) ACPI: DBGP 000000009f7ec000 00034 (v01 INSYDE STARGO 00000001 ACPI 00040000) ACPI: FPDT 000000009f7ea000 00044 (v01 INSYDE STARGO 00000001 ACPI 00040000) ACPI: SSDT 000000009f7e9000 009AA (v01 INSYDE STARGO 00003000 ACPI 00040000) ACPI: SSDT 000000009f7e8000 00B22 (v01 INSYDE STARGO 00003000 ACPI 00040000) ACPI: DMAR 000000009f7e7000 00070 (v01 INSYDE STARGO 00000001 ACPI 00040000) ACPI: SSDT 000000009f7e6000 00338 (v01 INSYDE STARGO 00001000 ACPI 00040000) ACPI: HEST 000000009f7e5000 000A8 (v01 INSYDE STARGO 00000001 ACPI 00040000) ACPI: ERST 000000009f7e4000 00230 (v01 INSYDE STARGO 00000001 ACPI 00040000) ACPI: BERT 000000009f7e3000 00030 (v01 INSYDE STARGO 00000001 ACPI 00040000) ACPI: EINJ 000000009f7e2000 00130 (v01 INSYDE STARGO 00000001 ACPI 00040000) No NUMA configuration found Faking a node at [mem 0x0000000000000000-0x000000045fffffff] Initmem setup node 0 [mem 0x00000000-0x45fffffff] NODE_DATA [mem 0x45ffef000-0x45fff0fff] Zone ranges: DMA [mem 0x00001000-0x00ffffff] DMA32 [mem 0x01000000-0xffffffff] Normal [mem 0x100000000-0x45fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x00001000-0x00084fff] node 0: [mem 0x00100000-0x7fffffff] node 0: [mem 0x84000000-0x9eebefff] node 0: [mem 0x9f7ff000-0x9f7fffff] node 0: [mem 0x100000000-0x45fffffff] ACPI: PM-Timer IO Port: 0x408 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 smpboot: Allowing 8 CPUs, 0 hotplug CPUs e820: [mem 0xa0000000-0xdfffffff] available for PCI devices setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 PERCPU: Embedded 27 pages/cpu @ffff88045fc00000 s80512 r8192 d21888 u262144 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4108146 Policy zone: Normal Kernel command line: BOOT_IMAGE=/bzImage-intel-x86-64.bin root=LABEL=ROOT console=ttyS0,9600n8 acpi=ht reset_devices libata.force=noncq acpi_enforce_resources=lax memmap=64M$2G hugepages=5999 isole Intel-IOMMU: enabled PID hash table entries: 4096 (order: 3, 32768 bytes) xsave: enabled xstate_bv 0x7, cntxt size 0x340 Checking aperture... No AGP bridge found Memory: 16279884k/18350080k available (8509k kernel code, 1656560k absent, 413636k reserved, 6723k data, 1208k init) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 Preemptible hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. NR_IRQS:16640 nr_irqs:744 16 Console: colour dummy device 80x25 console [ttyS0] enabled allocated 67108864 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups tsc: Fast TSC calibration using PIT tsc: Detected 2500.068 MHz processor Calibrating delay loop (skipped), value calculated using timer frequency.. 5000.13 BogoMIPS (lpj=2500068) pid_max: default: 32768 minimum: 301 init_memory_mapping: [mem 0x80770000-0x8076ffff] init_memory_mapping: [mem 0x00000000-0x8076ffff] init_memory_mapping: [mem 0x9eebf000-0x9f0befff] init_memory_mapping: [mem 0x9f0bf000-0x9f2befff] Security Framework initialized Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys debug Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls Initializing cgroup subsys blkio CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 ENERGY_PERF_BIAS: Set to 'normal', was 'performance' ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) mce: CPU supports 9 MCE banks CPU0: Thermal monitoring enabled (TM1) Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 tlb_flushall_shift: 2 Freeing SMP alternatives: 32k freed ACPI: Core revision 20130328 ACPI: All ACPI Tables successfully acquired ftrace: allocating 31141 entries in 122 pages ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 smpboot: CPU0: Intel(R) Xeon(R) CPU @ 2.50GHz (fam: 06, model: 3a, stepping: 09) Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver. ... version: 3 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 0000ffffffffffff ... fixed-purpose events: 3 ... event mask: 000000070000000f smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 OK Brought up 8 CPUs smpboot: Total of 8 processors activated (40001.08 BogoMIPS) devtmpfs: initialized PM: Registering ACPI NVS region [mem 0x9f6bf000-0x9f7befff] (1048576 bytes) xor: automatically using best checksumming function: avx : 17184.000 MB/sec pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type PCI registered PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 PCI: Using configuration type 1 for base access bio: create slab at 0 raid6: sse2x1 6847 MB/s raid6: sse2x2 8460 MB/s raid6: sse2x4 9824 MB/s raid6: using algorithm sse2x4 (9824 MB/s) raid6: using ssse3x2 recovery algorithm ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: SSDT 000000009f547018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20130117) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20130117) ACPI: SSDT 000000009f548a98 00303 (v01 PmRef ApIst 00003000 INTL 20130117) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20130117) ACPI: SSDT 000000009f546d98 00119 (v01 PmRef ApCst 00003000 INTL 20130117) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20130117) ACPI: Interpreter enabled ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130328/hwxface-568) ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568) ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20130328/hwxface-568) ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: Power Resource [FN00] (off) ACPI: Power Resource [FN01] (off) ACPI: Power Resource [FN02] (off) ACPI: Power Resource [FN03] (off) ACPI: Power Resource [FN04] (off) ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [bus 00-fe] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xfeafffff] pci_bus 0000:00: root bus resource [mem 0x460000000-0x85fffffff] pci 0000:00:01.0: System wakeup disabled by ACPI pci 0000:00:01.1: System wakeup disabled by ACPI pci 0000:00:1c.0: System wakeup disabled by ACPI pci 0000:00:1d.0: System wakeup disabled by ACPI pci 0000:01:00.0: System wakeup disabled by ACPI pci 0000:00:01.0: PCI bridge to [bus 01-06] pci 0000:00:01.1: PCI bridge to [bus 07] pci 0000:08:00.0: System wakeup disabled by ACPI pci 0000:00:1c.0: PCI bridge to [bus 08] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d) acpi PNP0A08:00: ACPI _OSC control (0x1d) granted ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. ACPI: Enabled 5 GPEs in block 00 to 3F vgaarb: loaded SCSI subsystem initialized ACPI: bus type ATA registered ACPI: bus type USB registered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti PTP clock support registered PCI: Using ACPI for IRQ routing Bluetooth: Core ver 2.16 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized nfc: nfc_init: NFC Core ver 0.1 NET: Registered protocol family 39 hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 hpet0: 8 comparators, 64-bit 14.318180 MHz counter Switching to clocksource hpet pnp: PnP ACPI init ACPI: bus type PNP registered system 00:04: [io 0x0680-0x069f] has been reserved system 00:04: [io 0x1000-0x100f] has been reserved system 00:04: [io 0xffff] has been reserved system 00:04: [io 0xffff] has been reserved system 00:04: [io 0x0400-0x0453] could not be reserved system 00:04: [io 0x0458-0x047f] has been reserved system 00:04: [io 0x0500-0x057f] has been reserved system 00:04: [io 0x164e-0x164f] has been reserved system 00:06: [io 0x0454-0x0457] has been reserved system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved system 00:09: [mem 0xe0000000-0xefffffff] has been reserved system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved system 00:09: [mem 0xff000000-0xffffffff] could not be reserved system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved pnp: PnP ACPI: found 11 devices ACPI: bus type PNP unregistered pci 0000:00:1c.0: BAR 14: assigned [mem 0xa3400000-0xa37fffff] pci 0000:00:1c.0: BAR 13: assigned [io 0x5000-0x5fff] pci 0000:00:01.0: PCI bridge to [bus 01-06] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] pci 0000:00:01.0: bridge window [mem 0xa4000000-0xa4ffffff] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xa0ffffff 64bit pref] pci 0000:00:01.1: PCI bridge to [bus 07] pci 0000:00:01.1: bridge window [io 0x2000-0x2fff] pci 0000:00:01.1: bridge window [mem 0xa3200000-0xa32fffff] pci 0000:00:01.1: bridge window [mem 0xa3100000-0xa31fffff 64bit pref] pci 0000:00:1c.0: PCI bridge to [bus 08] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff] pci 0000:00:1c.0: bridge window [mem 0xa3400000-0xa37fffff] pci 0000:00:1c.0: bridge window [mem 0xa1000000-0xa30fffff 64bit pref] NET: Registered protocol family 2 TCP established hash table entries: 131072 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP: reno registered UDP hash table entries: 8192 (order: 6, 262144 bytes) UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Trying to unpack rootfs image as initramfs... Freeing initrd memory: 21684k freed dmar: Host address width 36 dmar: DRHD base: 0x000000fed91000 flags: 0x1 dmar: IOMMU 0: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f010da dmar: RMRR base: 0x0000009f681000 end: 0x0000009f6a0fff DMAR: No ATSR found IOMMU 0 0xfed91000: using Queued invalidation IOMMU: hardware identity mapping for device 0000:00:00.0 IOMMU: hardware identity mapping for device 0000:00:01.0 IOMMU: hardware identity mapping for device 0000:00:01.1 IOMMU: hardware identity mapping for device 0000:00:1c.0 IOMMU: hardware identity mapping for device 0000:00:1d.0 IOMMU: hardware identity mapping for device 0000:00:1f.0 IOMMU: hardware identity mapping for device 0000:00:1f.2 IOMMU: hardware identity mapping for device 0000:00:1f.3 IOMMU: hardware identity mapping for device 0000:00:1f.6 IOMMU: hardware identity mapping for device 0000:00:1f.7 IOMMU: hardware identity mapping for device 0000:01:00.0 IOMMU: hardware identity mapping for device 0000:07:00.0 IOMMU: hardware identity mapping for device 0000:07:00.1 IOMMU: hardware identity mapping for device 0000:07:00.2 IOMMU: hardware identity mapping for device 0000:07:00.3 IOMMU: hardware identity mapping for device 0000:08:00.0 IOMMU: hardware identity mapping for device 0000:08:00.1 IOMMU: Setting RMRR: Ignoring identity map for HW passthrough device 0000:00:1d.0 [0x9f681000 - 0x9f6a0fff] IOMMU: Prepare 0-16MiB unity mapping for LPC Ignoring identity map for HW passthrough device 0000:00:1f.0 [0x0 - 0xffffff] PCI-DMA: Intel(R) Virtualization Technology for Directed I/O Simple Boot Flag at 0x44 set to 0x80 microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x19 microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x19 microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x19 microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x19 microcode: CPU4 sig=0x306a9, pf=0x10, revision=0x19 microcode: CPU5 sig=0x306a9, pf=0x10, revision=0x19 microcode: CPU6 sig=0x306a9, pf=0x10, revision=0x19 microcode: CPU7 sig=0x306a9, pf=0x10, revision=0x19 microcode: Microcode Update Driver: v2.00 , Peter Oruba Scanning for low memory corruption every 60 seconds HugeTLB registered 2 MB page size, pre-allocated 5999 pages NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered Installing knfsd (copyright (C) 1996 okir@monad.swb.de). aufs 3.10-20130819 msgmni has been set to 32055 async_tx: api initialized (async) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) tsc: Refined TSC clocksource calibration: 2499.999 MHz io scheduler noop registered io scheduler deadline registered Switching to clocksource tsc io scheduler cfq registered (default) 32bit 0000:00:01.0 uses non-identity mapping 32bit 0000:00:01.1 uses non-identity mapping 32bit 0000:00:1c.0 uses non-identity mapping pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt pci 0000:01:00.0: Signaling PME through PCIe PME interrupt pcieport 0000:00:01.1: Signaling PME through PCIe PME interrupt pci 0000:07:00.0: Signaling PME through PCIe PME interrupt pci 0000:07:00.1: Signaling PME through PCIe PME interrupt pci 0000:07:00.2: Signaling PME through PCIe PME interrupt pci 0000:07:00.3: Signaling PME through PCIe PME interrupt pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt pci 0000:08:00.0: Signaling PME through PCIe PME interrupt pci 0000:08:00.1: Signaling PME through PCIe PME interrupt input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Linux agpgart interface v0.103 tpm_tis 00:0a: 1.2 TPM (device-id 0x1A, rev-id 16) i2c /dev entries driver [drm] Initialized drm 1.1.0 20060810 brd: module loaded loop: module loaded isci: Intel(R) C600 SAS Controller Driver - version 1.1.0 mpt2sas version 14.100.00.00 loaded mpt3sas version 01.100.01.00 loaded VMware PVSCSI driver - version 1.0.2.0-k 32bit 0000:00:1f.2 uses non-identity mapping ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x30 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst 64bit 0000:00:1f.2 uses identity mapping scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: DUMMY ata2: DUMMY ata3: DUMMY ata4: DUMMY ata5: SATA max UDMA/133 abar m2048@0xa3307000 port 0xa3307300 irq 44 ata6: SATA max UDMA/133 abar m2048@0xa3307000 port 0xa3307380 irq 44 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky VMware vmxnet3 virtual NIC driver - version 1.1.30.0-k-NAPI ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver 32bit 0000:00:1d.0 uses non-identity mapping ehci-pci 0000:00:1d.0: EHCI Host Controller ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1 ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ehci-pci 0000:00:1d.0: debug port 2 ehci-pci 0000:00:1d.0: irq 23, io mem 0xa3308000 ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata5.00: FORCE: horkage modified (noncq) ata6.00: FORCE: horkage modified (noncq) ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 ata5.00: ATA-9: TS16DSTDE1500, O1225G, max UDMA/133 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ata5.00: 31277232 sectors, multi 1: LBA48 NCQ (not used) uhci_hcd: USB Universal Host Controller Interface driver ata6.00: ATA-9: SFSA100GQ1AA4TO-C-LB-216-JUN, SBR13025, max UDMA/133 usbcore: registered new interface driver usb-storage ata6.00: 195371568 sectors, multi 1: LBA48 NCQ (not used) usbcore: registered new interface driver usbserial usbcore: registered new interface driver usbserial_generic usb 1-1: new high-speed USB device number 2 using ehci-pci usbserial: USB Serial support registered for generic ata5.00: configured for UDMA/133 i8042: PNP: No PS/2 controller found. Probing ports directly. scsi 4:0:0:0: Direct-Access ATA TS16DSTDE1500 O122 PQ: 0 ANSI: 5 ata6.00: configured for UDMA/133 sd 4:0:0:0: [sda] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB) sd 4:0:0:0: [sda] Write Protect is off sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA hub 1-1:1.0: USB hub found scsi 5:0:0:0: Direct-Access ATA SFSA100GQ1AA4TO- SBR1 PQ: 0 ANSI: 5 i8042: No controller found mousedev: PS/2 mouse device common for all mice input: PC Speaker as /devices/platform/pcspkr/input/input2 hub 1-1:1.0: 6 ports detected rtc_cmos 00:05: RTC can wake from S4 rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 sd 5:0:0:0: [sdb] 195371568 512-byte logical blocks: (100 GB/93.1 GiB) rtc_cmos 00:05: alarms up to one month, 242 bytes nvram, hpet irqs md: linear personality registered for level -1 sd 5:0:0:0: [sdb] Write Protect is off md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 sda: sda1 sda2 sda3 sda4 sda5 sda6 sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 4:0:0:0: [sda] Attached SCSI disk md: raid10 personality registered for level 10 md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 sdb: unknown partition table md: multipath personality registered for level -4 md: faulty personality registered for level -5 device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com sd 5:0:0:0: [sdb] Attached SCSI disk usbcore: registered new interface driver btusb cpuidle: using governor ladder cpuidle: using governor menu sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper EFI Variables Facility v0.08 2004-May-17 usbcore: registered new interface driver usbhid usbhid: USB HID core driver oprofile: using NMI interrupt. u32 classifier Actions configured TCP: cubic registered NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bluetooth: BNEP socket layer initialized Bluetooth: HIDP (Human Interface Emulation) ver 1.2 Bluetooth: HIDP socket layer initialized Key type dns_resolver registered registered taskstats version 1 console [netcon0] enabled netconsole: network logging started rtc_cmos 00:05: setting system clock to 2022-01-25 22:06:02 UTC (1643148362) Freeing unused kernel memory: 1208k freed Write protecting the kernel read-only data: 14336k Freeing unused kernel memory: 1720k freed Freeing unused kernel memory: 688k freed First Level Bootudevd[104]: starting version 182 strap using initramfs... 32bit 0000:00:1f.0 uses non-identity mapping Intel(R) Gigabit Ethernet Network Driver - version 5.2.9.4 ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130328/utaddress-251) Copyright (c) 2007-2014 Intel Corporation. 32bit 0000:07:00.1 uses non-identity mapping ACPI: This conflict may cause random problems and system instability ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver ACPI Warning: 0x00000000fed50000-0x00000000fed60000 SystemMemory conflicts with Region \_SB_.PCI0.FPGA 1 (20130328/utaddress-251) ACPI: This conflict may cause random problems and system instability ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 iTCO_wdt: Found a DH89xxCC TCO device (Version=2, TCOBASE=0x0460) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) igb 0000:07:00.1: added PHC on eth0 igb 0000:07:00.1: Intel(R) Gigabit Ethernet Network Connection igb 0000:07:00.1: eth0: (PCIe:5.0GT/s:unknown) igb 0000:07:00.1 eth0: MAC: 44:f4:77:41:cd:08 igb 0000:07:00.1: eth0: PBA No: Unknown igb 0000:07:00.1: LRO is disabled igb 0000:07:00.1: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s) 64bit 0000:07:00.1 uses identity mapping 32bit 0000:07:00.2 uses non-identity mapping igb 0000:07:00.2: added PHC on eth1 igb 0000:07:00.2: Intel(R) Gigabit Ethernet Network Connection igb 0000:07:00.2: eth1: (PCIe:5.0GT/s:unknown) igb 0000:07:00.2 eth1: MAC: 44:f4:77:41:cd:09 igb 0000:07:00.2: eth1: PBA No: Unknown igb 0000:07:00.2: LRO is disabled igb 0000:07:00.2: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s) 64bit 0000:07:00.2 uses identity mapping 32bit 0000:07:00.3 uses non-identity mapping igb 0000:07:00.3: Hardware Initialization Failure igb: probe of 0000:07:00.3 failed with error -5 Mounting boot deFAT-fs (sda2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. vice LABEL=LINUX-BOOT Unpacking initrd.cpio.gz .... 1096200 blocks Unmount boot device LABEL=LINUX-BOOT udevd[254]: starting version 182 32bit 0000:00:1f.3 uses non-identity mapping 32bit 0000:01:00.0 uses non-identity mapping gpio_ich: GPIO from 188 to 255 on gpio_ich ACPI: Requesting acpi_cpufreq thermal LNXTHERM:00: registered as thermal_zone0 SRX1500 FPGA registered with UIO 64bit 0000:01:00.0 uses identity mapping i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt ACPI: Thermal Zone [TZ01] (30 C) ACPI: Fan [FAN0] (off) ACPI: Fan [FAN1] (off) ACPI: Fan [FAN2] (off) ACPI: Fan [FAN3] (off) ACPI: Fan [FAN4] (off) kernel commandline: BOOT_IMAGE=/bzImage-intel-x86-64.bin root=LABEL=ROOT consoleEXT4-fs (sda4): recovery complete =ttyS0,9600n8 acEXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) pi=ht reset_devices libata.force=noncq acpi_enforce_resources=lax memmap=64M$2G hugepages=5999 isolcpus=1-63 intel_iommu=on iommu=pt intel_pstate=disable vjunos-console=telnet mgmt_eth=bridge fstab suggests root=rootfs fstab suggests rootflags=defaults fstab suggests rootfstype=auto init=/sbin/init root=LABEL=ROOT rootflags=defaults rootfstype=auto root_ro=0 root_rw=0 transfering control to /sbin/init INIT: version 2.88 booting EXT4-fs (sda5): recovery complete EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) Starting udev udevd[421]: starting version 182 Error: Driver 'ingot_fpga_uio' is already registered, aborting... PCA9564/PCA9665 at 0xfed50030: PCA9665 detected. PCA9564/PCA9665 at 0xfed50030: Clock frequency is 100000Hz PCA9564/PCA9665 at 0xfed50030 registered. cpld i2c resource res->start i2c-mux-cpld 0xfed50010 resource_size 0x5 cpld i2c mapped 0x2258e010 cpld i2c number 6 i2c i2c-1: Added multiplexed i2c bus 2 Registering i2c-mux-cpld adapter! (0) i2c i2c-1: Added multiplexed i2c bus 3 Registering i2c-mux-cpld adapter! (1) i2c i2c-1: Added multiplexed i2c bus 4 Registering i2c-mux-cpld adapter! (2) i2c i2c-1: Added multiplexed i2c bus 5 Registering i2c-mux-cpld adapter! (3) i2c i2c-1: Added multiplexed i2c bus 6 Registering i2c-mux-cpld adapter! (4) i2c i2c-1: Added multiplexed i2c bus 7 Registering i2c-mux-cpld adapter! (5) i2c-mux-cpld i2c-mux-cpld: 6 port mux on PCA9564/PCA9665 at 0xfed50030 adapter running pre rc steps on SRX1500 FAT-fs (sda2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. BIOS_DRV: Driver registered. BIOS_DRV: Driver : <248, 0> disable_srx_boot_device set_srx_boot_device bio: create slab at 1 3 logical volume(s) in volume group "vg0_vjunos" now active FAT-fs (sda2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. EXT4-fs (sda3): recovery complete EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) EXT4-fs (dm-0): recovery complete EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: discard EXT4-fs (dm-2): recovery complete EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: discard EXT4-fs (dm-1): recovery complete EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: discard Adding 685540k swap on /dev/sda6. Priority:-1 extents:1 across:685540k SS Starting udev udevd[1217]: starting version 182 Error: Driver 'ingot_fpga_uio' is already registered, aborting... 32bit 0000:07:00.0 uses non-identity mapping 64bit 0000:07:00.0 uses identity mapping Loading SAL Module ... igb_uio: Use MSIX interrupt by default In init_module In init_module - after register_chrdev 32bit 0000:08:00.0 uses non-identity mapping In _pci_probe Enable PCI device : vendor_id = 14e4, device_id = b548 linux-kernel-bde (1435): Payload size exceeds device capability (256) 32bit 0000:08:00.1 uses non-identity mapping In _pci_probe linux-kernel-bde (1435): _alloc_mpool: allocated 0x400000 bytes instead of 0x800000 bytes. In init_module In init_module - after register_chrdev EXT4-fs (sda4): re-mounted. Opts: (null) Starting Bootlog daemon: bootlogd. Populating dev cache Starting portmap daemon... net.ipv4.conf.default.rp_filter = 1 net.ipv4.conf.all.rp_filter = 1 kernel.core_uses_pid = 0 kernel.core_pattern = |/etc/init.d/zipcore.sh /var/tmp/corefiles/ %h.%e.%p.%t.core %e fs.suid_dumpable = 2 vm.swappiness = 1 vm.vfs_cache_pressure = 50 kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e kernel.cotty_port_close_start: tty->count = 1 port count = 2.