Hit [Enter] to boot immediately, or space bar for command prompt. Booting [/kernel] in 1 second... Type '?' for a list of commands, 'help' for more detailed help. loader> boot -s Kernel entry at 0x801000d8 ... getbootinfo: magic 0x0 md 0x80bee000 memsize 0x0 WARNING: System coming up from legacy bootloader. Please upgrade U-Boot to version 1.5 or above and Loader to version 1.5 or above. getbootinfo: boothowto 0x1002 kernend 0x80c00000 memsize 1024MB i2cid 0x531 kernelname /ke rnel Platform Starting init regular console Initializing octeon watchdog GDB: debug ports: uart GDB: current port: uart KDB: debugger backends: ddb gdb KDB: current backend: ddb getmemsize: msgbufp[size=32768] = 0x8000cfe4 Copyright (c) 1996-2009, Juniper Networks, Inc. All rights reserved. Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. JUNOS 10.0R2.10 #0: 2009-12-12 16:02:21 UTC builder@ormonth.juniper.net:/volume/build/junos/10.0/release/10.0R2.10/obj-octeon/bsd/ sys/compile/JSRXNLE JUNOS 10.0R2.10 #0: 2009-12-12 16:02:21 UTC builder@ormonth.juniper.net:/volume/build/junos/10.0/release/10.0R2.10/obj-octeon/bsd/ sys/compile/JSRXNLE real memory = 1073741824 (1024MB) avail memory = 535977984 (511MB) cpuid: 0, btlb_cpumap:0xffffffff FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs Initializing watchdog interupt Loading RT Fifo module..... Loaded RT Fifo module pmap_helper loaded (interface version 6, syscall 210) cpu0 on motherboard : CAVIUM's Octeon CPU Rev. 0.1 with no FPU implemented L1 Cache: I size 32kb(128 line), D size 8kb(128 line), sixty four way. L2 Cache: Size 128kb, ? way obio0 on motherboard uart0: on obio0 uart0: console (9600,n,8,1) twsi0 on obio0 dwc0: on obio0 usb0: DWC OTG Controller Using DMA mode Init: Port Power? op_state=1 Init: Power Port (0) usb0: on dwc0 usb0: USB revision 2.0 uhub0: vendor 0x0000 DWC OTG root hub, class 9/0, rev 2.00/1.00, addr 1 uhub0: 1 port with 1 removable, self powered uhub1: vendor 0x0409 product 0x005a, class 9/0, rev 2.00/1.00, addr 2 uhub1: single transaction translator uhub1: 2 ports with 1 removable, self powered umass0: STMicroelectronics ST72682 High Speed Mode, rev 2.00/2.10, addr 3 pcib0: on obio0 Disabling Octeon big bar support PCI Status: PCI 32-bit: 0xc041b pcib0: Initialized controller pci0: on pcib0 pci0: at device 2.0 (no driver attached) pci0: at device 2.1 (no driver attached) pci0: at device 2.2 (no driver attached) cpld0 on obio0 gblmem0 on obio0 octpkt0: on obio0 cfi0: on obio0 platform_cookie_read not implemented Timecounter "mips" frequency 500000000 Hz quality 0 Timecounters tick every 1.000 msec Loading the NETPFE ethernet module Loading E1/T1/J1 driver Loading the DS1/E1 Media Layer; Attaching to media services layer Loading common multilink module. Loading the NETPFE PPPoE module Loading the netpfe services driver Loading the XDSL Media Layer; Attaching to media services layer Loading the IPSec driver Loading the PTM driver Loading the DIALER driver Loading Link Services PICs module. IPsec: Initialized Security Association Processing. SMP: AP CPU #1 Launched! da0 at umass-sim0 bus 0 target 0 lun 0 da0: Removable Direct Access SCSI-2 device da0: 40.000MB/s transfers da0: 1000MB (2048000 512 byte sectors: 64H 32S/T 1000C) if_pfe_open: listener socket opened, listening on ... Trying to create bootdev, rootpartition da0s1a Trying to mount root from ufs:/dev/da0s1a WARNING: / was not properly dismounted Attaching /cf/packages/junos via /dev/mdctl... Mounted junos package on /dev/md0... Booting single-user ** /dev/da0s1a ** Last Mounted on / ** Root file system ** Phase 1 - Check Blocks and Sizes ** Phase 2 - Check Pathnames ** Phase 3 - Check Connectivity ** Phase 4 - Check Reference Counts ** Phase 5 - Check Cyl groups 125 files, 91407 used, 58627 free (43 frags, 7323 blocks, 0.0% fragmentation) ***** FILE SYSTEM MARKED CLEAN ***** System watchdog timer disabled Enter full pathname of shell or 'recovery' for root password recovery or RETURN for /bin/s h: recovery Performing system setup ... ** /dev/bo0s3e ** Last Mounted on /config ** Phase 1 - Check Blocks and Sizes ** Phase 2 - Check Pathnames ** Phase 3 - Check Connectivity ** Phase 4 - Check Reference Counts ** Phase 5 - Check Cyl groups 15 files, 14 used, 12488 free (24 frags, 1558 blocks, 0.2% fragmentation) ***** FILE SYSTEM MARKED CLEAN ***** ** /dev/bo0s3f ** Last Mounted on /cf/var ** Phase 1 - Check Blocks and Sizes ** Phase 2 - Check Pathnames ** Phase 3 - Check Connectivity ** Phase 4 - Check Reference Counts ** Phase 5 - Check Cyl groups 210 files, 2143 used, 173171 free (123 frags, 21631 blocks, 0.1% fragmentation) ***** FILE SYSTEM MARKED CLEAN ***** Loading configuration ... mgd: commit complete Setting initial options: debugger_on_panic=NO debugger_on_break=NO. Starting optional daemons: usbd. Doing initial network setup: . Initial interface configuration: TNPv3: adding neighbor 0x00000001 to interface lo0. additional daemons: eventd. savecore: /dev/bo0s1b: No such file or directory savecore: Reboot reason(s): 0x1: power cycle/failure savecore: no dumps found Additional routing options:kern.module_path: /boot//kernel;/boot/modules -> /boot//kernel; /boot/modules;/modules grat_arp_delay=${grat_arp_delay}: net.link.ether.inet.grat_arp_delay: 0 -> 0 . Doing additional network setup:. Starting final network daemons:. setting ldconfig path: /usr/lib /opt/lib starting standard daemons: cron. Initial rc.mips initialization:. Local package initialization:. starting local daemons:. debug.kdb.stop_cpus: 1 -> 2 Creating UTM MFS partition... UTM MFS partition created Creating JAIL MFS partition... JAIL MFS partition created machdep.nextbootdev: usb -> nand-flash Boot media /dev/da0 has dual root support hw.re.dualroot.enabled: 0 -> 1 hw.re.dualroot.active_root: -> /dev/da0s1a hw.re.dualroot.current_root: -> /dev/da0s1a hw.re.dualroot.alt_root: -> /dev/da0s2a hw.re.dualroot.booted_from: -> active ** /dev/da0s2a FILE SYSTEM CLEAN; SKIPPING CHECKS clean, 58741 free (13 frags, 7341 blocks, 0.0% fragmentation) Tue Mar 30 20:36:56 UTC 2010 Running recovery script ... machdep.bootsuccess: 1 -> 1 Performing initialization of management services ... Performing checkout of management services ... NOTE: Once in the CLI, you will need to enter configuration mode using NOTE: the 'configure' command to make any required changes. For example, NOTE: to reset the root password, type: NOTE: configure NOTE: set system root-authentication plain-text-password NOTE: (enter the new password when asked) NOTE: commit NOTE: exit NOTE: exit NOTE: When you exit the CLI, you will be asked if you want to reboot NOTE: the system Starting CLI ... root> panic: Hardware watchdog timeout NMI cpuid = 0 KDB: stack backtrace: SP 0x0: not in kernel 0x0+0x0 (0,0,0,0) ra 0 sz 0 pid 22 Uptime: 3m15s Cannot dump. No dump device defined. Automatic reboot in 15 seconds - press a key on the console to abort