15.11.2012 13:30:44 IPSec: Start building connection 15.11.2012 13:30:44 Ike: Outgoing connect request AGGRESSIVE mode - gateway=91.213.133.1 : IT-onBase 15.11.2012 13:30:44 Ike: XMIT_MSG1_AGGRESSIVE - IT-onBase 15.11.2012 13:30:44 Ike: RECV_MSG2_AGGRESSIVE - IT-onBase 15.11.2012 13:30:44 Ike: IKE phase I: Setting LifeTime to 28800 seconds 15.11.2012 13:30:44 Ike: Turning on XAUTH mode - IT-onBase 15.11.2012 13:30:44 Ike: IkeSa negotiated with the following properties - 15.11.2012 13:30:44 Authentication=XAUTH_INIT_PSK,Encryption=DES,Hash=MD5,DHGroup=2,KeyLen=0 15.11.2012 13:30:44 Ike: IT-onBase ->Support for NAT-T version - 9 15.11.2012 13:30:44 IPSec: Final Tunnel EndPoint is:091.213.133.001 15.11.2012 13:30:44 Ike: Turning on NATD mode - IT-onBase - 1 15.11.2012 13:30:44 Ike: XMIT_MSG3_AGGRESSIVE - IT-onBase 15.11.2012 13:30:44 Ike: IkeSa negotiated with the following properties - 15.11.2012 13:30:44 Authentication=XAUTH_INIT_PSK,Encryption=DES,Hash=MD5,DHGroup=2,KeyLen=0 15.11.2012 13:30:44 Ike: phase1:name(IT-onBase) - connected 15.11.2012 13:30:44 SUCCESS: IKE phase 1 ready 15.11.2012 13:30:44 IPSec: Phase1 is Ready,AdapterIndex=0,IkeIndex=8,LocTepIpAdr=0.0.0.0,AltRekey=1 15.11.2012 13:30:44 IkeXauth: RECV_XAUTH_REQUEST 15.11.2012 13:30:44 IkeXauth: XMIT_XAUTH_REPLY 15.11.2012 13:30:44 IkeXauth: RECV_XAUTH_SET 15.11.2012 13:30:44 IkeXauth: XMIT_XAUTH_ACK 15.11.2012 13:30:44 IkeCfg: name - IkeXauth: enter state open 15.11.2012 13:30:44 SUCCESS: Ike Extended Authentication is ready 15.11.2012 13:30:44 IPSec: Quick Mode is Ready: IkeIndex = 00000008 , VpnSrcPort = 10954 15.11.2012 13:30:44 IPSec: Assigned IP Address: 0.0.0.0 15.11.2012 13:30:44 IPSec: Gateway IP Address: 0.0.0.0 15.11.2012 13:30:44 IkeCfg: RECV_IKECFG_SET - IT-onBase 15.11.2012 13:30:44 IkeCfg: XMIT_IKECFG_ACK - IT-onBase 15.11.2012 13:30:44 IkeCfg: name - IkeXauth: enter state open 15.11.2012 13:30:44 SUCCESS: Ike Extended Authentication is ready 15.11.2012 13:30:44 IPSec: Quick Mode is Ready: IkeIndex = 00000008 , VpnSrcPort = 10954 15.11.2012 13:30:44 IPSec: Assigned IP Address: 10.100.200.7 15.11.2012 13:30:44 IPSec: Gateway IP Address: 0.0.0.0 15.11.2012 13:30:44 IkeQuick: XMIT_MSG1_QUICK - IT-onBase 15.11.2012 13:30:44 IkeQuick: XMIT_MSG1_QUICK - IT-onBase 15.11.2012 13:30:44 IkeQuick: Received Notify(IT-onBase) -> remote is reducing LifeTime to 3600 15.11.2012 13:30:44 IkeQuick: RECV_MSG2_QUICK - IT-onBase 15.11.2012 13:30:44 IkeQuick: Turning on PFS mode(IT-onBase) with group 2 15.11.2012 13:30:44 IkeQuick: XMIT_MSG3_QUICK - IT-onBase 15.11.2012 13:30:44 IkeQuick: phase2:name(IT-onBase) - connected 15.11.2012 13:30:44 SUCCESS: Ike phase 2 (quick mode) ready 15.11.2012 13:30:44 IPSec: Created an IPSEC SA with the following characteristics - 15.11.2012 13:30:44 IpSrcRange=[0.0.0.0-0.0.0.0],IpDstRange=[10.200.1.0-10.200.1.255],IpProt=0,SrcPort=0,DstPort=0 15.11.2012 13:30:44 IPSec: connected: LifeDuration in Seconds = 2520 and in KiloBytes = 0 15.11.2012 13:30:44 IPSec: Connected to IT-onBase on channel 1. 15.11.2012 13:30:44 PPP(Ipcp): connected to IT-onBase with IP Address: 10.100.200.7 15.11.2012 13:30:44 SUCCESS: IpSec connection ready 15.11.2012 13:30:44 IkeQuick: Received Notify(IT-onBase) -> remote is reducing LifeTime to 3600 15.11.2012 13:30:44 IkeQuick: RECV_MSG2_QUICK - IT-onBase 15.11.2012 13:30:44 IkeQuick: Turning on PFS mode(IT-onBase) with group 2 15.11.2012 13:30:44 IkeQuick: XMIT_MSG3_QUICK - IT-onBase 15.11.2012 13:30:44 IkeQuick: phase2:name(IT-onBase) - connected 15.11.2012 13:30:44 SUCCESS: Ike phase 2 (quick mode) ready 15.11.2012 13:30:44 IPSec: Created an IPSEC SA with the following characteristics - 15.11.2012 13:30:44 IpSrcRange=[10.100.200.7-10.100.200.7],IpDstRange=[10.200.1.0-10.200.1.255],IpProt=0,SrcPort=0,DstPort=0 15.11.2012 13:30:44 IPSec: connected: LifeDuration in Seconds = 2520 and in KiloBytes = 0 15.11.2012 13:30:46 SUCCESS: Link -> IP address assigned to IP stack - link is operational.