U-Boot 1.1.6 (Jul 26 2011 - 03:19:50) Board: EX2200-24P-4G 4.36 EPLD: Version 04.100311 (0x10) DRAM: Initializing (512MB) Flash: 8 MB Firmware Version:01.00.00 USB: scanning bus for devices... 3 USB Device(s) found scanning bus for storage devices... 1 Storage Device(s) found ELF file is 32 bit Consoles: U-Boot console FreeBSD/arm U-Boot loader, Revision 1.1 (builder@dagmath.juniper.net, Tue Jul 26 01:25:53 UTC 2011) Memory: 512MB bootsequencing is enabled bootsuccess is set new boot device = disk0s1: Loading /boot/defaults/loader.conf /kernel data=0x888d0c+0xdd8ac syms=[0x4+0xf0e60+0x4+0xc86c0] Hit [Enter] to boot immediately, or space bar for command prompt. Booting [/kernel]... Kernel entry at 0x1400100 ... GDB: debug ports: uart GDB: current port: uart KDB: debugger backends: ddb gdb KDB: current backend: ddb Copyright (c) 1996-2015, Juniper Networks, Inc. All rights reserved. Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. JUNOS 12.3R9.4 #0: 2015-02-12 11:08:08 UTC builder@kessuth.juniper.net:/volume/build/junos/12.3/release/12.3R9.4/obj-ar m/junos/bsd/kernels/JUNIPER-EX-2200/kernel can't re-use a leaf (all_slot_serialid)! CPU: Feroceon 88FR131 rev 1 (Marvell core) cpu53: Feroceon 88FR131 revision WB enabled EABT branch prediction enabled 16KB/32B 4-way Instruction cache 16KB/32B 4-way write-back-locking-C Data cache real memory = 536870912 (512 MB) avail memory = 503205888 (479 MB) SOC: Marvell 88F6281 rev A0, TClock 200MHz Security policy loaded: Junos MAC/veriexec (mac_veriexec) MAC/veriexec fingerprint module loaded: SHA256 MAC/veriexec fingerprint module loaded: SHA1 ETHERNET SOCKET BRIDGE initialising Initializing EXSERIES properties ... mbus0: on motherboard ic0: at mem 0xf1020200-0xf102023b on m bus0 timer0: at mem 0xf1020300-0xf102032f irq 1 on mbus0 gpio0: at mem 0xf1010100-0xf101011f irq 35, 36,37,38,39,40,41 on mbus0 uart0: <16550 or compatible> at mem 0xf1012000-0xf101201f irq 33 on mbus0 uart0: console (9600,n,8,1) uart1: <16550 or compatible> at mem 0xf1012100-0xf101211f irq 34 on mbus0 ehci0: <88F5XXX Integrated USB 2.0 controller> at mem 0xf1050000-0xf1050fff irq 48,19 on mbus0 usb0: EHCI version 1.0 usb0 on ehci0 usb0: USB revision 2.0 uhub0: Marvell EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub0: 1 port with 1 removable, self powered uhub1: vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/90.15, addr 2 uhub1: single transaction translator uhub1: 2 ports with 2 removable, self powered umass0: STMicroelectronics ST72682 High Speed Mode, rev 2.00/2.10, addr 3 mge0: at mem 0xf1072000-0xf1073fff irq 12, 13,14,11,46 on mbus0 mge0: hardware MAC address 7c:e2:ca:64:e9:ff miibus0: on mge0 e1000phy0: on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto i2c0: at mem 0xf1011000-0xf101101f irq 29 on mbus0 syspld0: on i2c0 8564 rtc0: <8564 RTC> on i2c0 poe0: on i2c0 cfi0: at mem 0xf1010600-0xf101062f,0xf8000000-0xf87fffff irq 2 3 on mbus0 mpfe0: at mem 0xf4000000-0xf7ffffff irq 113 on mbus0 pcib0: at mem 0xf1040000-0xf1041ff f,0xe8000000-0xefffffff irq 9 on mbus0 pci0: on pcib0 Initializing product: 76 .. bmeb: bmeb_lib_init done 0xc338a800, addr 0xc1d60064 bme0:Virtual BME driver initializing Timecounter "CPU Timer" frequency 200000000 Hz quality 1000 ###PCB Group initialized for udppcbgroup ###PCB Group initialized for tcppcbgroup da0 at umass-sim0 bus 0 target 0 lun 0 da0: Removable Direct Access SCSI-2 device da0: 40.000MB/s transfers da0: 1000MB (2048000 512 byte sectors: 64H 32S/T 1000C) Kernel thread "wkupdaemon" (pid 42) exited prematurely. Trying to mount root from ufs:/dev/da0s1a Attaching /packages/jbase via /dev/mdctl... Mounted jbase package on /dev/md0... Verified manifest signed by PackageProduction_12_3_0 Verified jboot signed by PackageProduction_12_3_0 Verified jbase-ex-12.3R9.4 signed by PackageProduction_12_3_0 Mounted fips-mode-arm package on /dev/md1... Verified manifest signed by PackageProduction_12_3_0 Verified fips-mode-arm-12.3R9.4 signed by PackageProduction_12_3_0 Mounted jcrypto-ex package on /dev/md2... Verified manifest signed by PackageProduction_12_3_0 Verified jcrypto-ex-12.3R9.4 signed by PackageProduction_12_3_0 Mounted jdocs-ex package on /dev/md3... Verified manifest signed by PackageProduction_12_3_0 Verified jdocs-ex-12.3R9.4 signed by PackageProduction_12_3_0 Mounted jkernel-ex-2200 package on /dev/md4... Verified manifest signed by PackageProduction_12_3_0 Verified jkernel-ex-2200-12.3R9.4 signed by PackageProduction_12_3_0 Mounted jpfe-ex22x package on /dev/md5... Verified manifest signed by PackageProduction_12_3_0 Verified jpfe-ex22x-12.3R9.4 signed by PackageProduction_12_3_0 Mounted jroute-ex package on /dev/md6... Verified manifest signed by PackageProduction_12_3_0 Verified jroute-ex-12.3R9.4 signed by PackageProduction_12_3_0 Mounted jswitch-ex package on /dev/md7... Verified manifest signed by PackageProduction_12_3_0 Verified jswitch-ex-12.3R9.4 signed by PackageProduction_12_3_0 Mounted jweb-ex package on /dev/md8... Verified manifest signed by PackageProduction_12_3_0 Verified jweb-ex-12.3R9.4 signed by PackageProduction_12_3_0 Executing /packages/mnt/jweb-ex-12.3R9.4/mount.post.. Automatic reboot in progress... Media check on da0 on ex platforms ** /dev/da0s1a FILE SYSTEM CLEAN; SKIPPING CHECKS clean, 36464 free (8 frags, 4557 blocks, 0.0% fragmentation) ** /dev/da0s3e ** Last Mounted on /var ** Phase 1 - Check Blocks and Sizes INCORRECT BLOCK COUNT I=12363 (172 should be 160) CORRECT? yes ** Phase 2 - Check Pathnames ** Phase 3 - Check Connectivity ** Phase 4 - Check Reference Counts ** Phase 5 - Check Cyl groups FREE BLK COUNT(S) WRONG IN SUPERBLK SALVAGE? yes SUMMARY INFORMATION BAD SALVAGE? yes BLK(S) MISSING IN BIT MAPS SALVAGE? yes 467 files, 2717 used, 60185 free (249 frags, 7492 blocks, 0.4% fragmentation) ***** FILE SYSTEM MARKED CLEAN ***** ***** FILE SYSTEM WAS MODIFIED ***** Computing slice and partition sizes for /dev/da0 ... savecore: Reboot reason(s): 0x1: power cycle/failure No dump exists ** /dev/da0s3d ** Last Mounted on /var/tmp ** Phase 1 - Check Blocks and Sizes ** Phase 2 - Check Pathnames ** Phase 3 - Check Connectivity ** Phase 4 - Check Reference Counts ** Phase 5 - Check Cyl groups 14 files, 164 used, 188690 free (34 frags, 23582 blocks, 0.0% fragmentation) ***** FILE SYSTEM MARKED CLEAN ***** ** /dev/da0s4d ** Last Mounted on /config ** Phase 1 - Check Blocks and Sizes ** Phase 2 - Check Pathnames ** Phase 3 - Check Connectivity ** Phase 4 - Check Reference Counts ** Phase 5 - Check Cyl groups 37 files, 42 used, 31564 free (28 frags, 3942 blocks, 0.1% fragmentation) ***** FILE SYSTEM MARKED CLEAN ***** rm: /var/etc/pam.conf: Operation not permitted Creating initial configuration...mgd: Running FIPS Self-tests veriexec: no signatures for device. file='/sbin/kats/cannot-exec' fsid=69 fileid=51404 gen=1 uid=0 pid=463 mgd: FIPS Self-tests Passed mgd: commit complete Setting initial options: debugger_on_panic=NO debugger_on_break=NO. Starting optional daemons: . Doing initial network setup:. Initial interface configuration: additional daemons:. Additional routing options:kern.module_path: /boot//kernel;/boot/modules -> /boot/modules;/modules/peertype;/modules/ifpfe_drv;/modules/platform;/modules; kld netpfe drv: ifpfed_eth ifpfed_ml_cmnkld platform: ex_ifpfeLoading the EX-series platform NETPFE module if_vcpkld peertype: peertype_hcm peertype_pfem peertype_sfi peertype_slavere grat_arp_on_ifup=YES: net.link.ether.inet.grat_arp_on_ifup: 1 -> 1 ipsec kld. Doing additional network setup:. Starting final network daemons:. setting ldconfig path: /usr/lib /opt/lib starting standard daemons: cron. Local package initialization:. Initialize /var subdirs starting local daemons:set cores for group access . Wed Feb 7 12:31:35 EET 2018 Boot media /dev/da0 has dual root support ** /dev/da0s2a FILE SYSTEM CLEAN; SKIPPING CHECKS clean, 36976 free (16 frags, 4620 blocks, 0.0% fragmentation) corelv (ttyu0) login: